Prof. dr Goran Stojanović (www.stojanovicgoran.com) je redovni profesor na Fakultetu tehničkih nauka, Univerziteta u Novom Sadu. Oblast njegovog istraživanja predstavljaju inovativni senzori, mikrofluidni čipovi, nanoelektronika, savitljiva elektronika. Autor je 2 knjige („Materijali u elektrotehnici“ i „Nanoelektronika i primena nanomaterijala“), 1 zbirke zadataka („Materijali u elektrotehnici – zbirka rešenih zadataka“) i 1 praktikuma („Karakterizacija i testiranje elektronskih komponenti“). Do sada je bio mentor 11 doktoranada, 60 master radova i 35 bečelor/diplomskih radova. Autor ili koautor 260 naučnih radova od toga 99 u časopisima sa SCI liste (sa impakt faktorom). Trenutni h-indeks je 16. U prethodnih 14 godina je privukao više od 14.8 miliona evra projektnih sredstva iz Evropskih fondova, zahvaljujući projektima koje je napisao i uspešno implementirao. Predavač po pozivu na 12 međunarodnih konferencija. Recenzent u 10 međunarodnih časopisa sa SCI liste. Osnivač i lider grupe za nano i fleksibilnu elektroniku, koja redovno učestvuje na Noći istraživača i na Festivalu nauke. Eksterni član komisija za odbranu doktorskih disertacija na Milan Polytechnic, Italija i Autonomous University Barcelona, Španija.
Selektovane publikacije (5):
1. G. Stojanović, M. Radetić, Z. Šaponjić, M. Radoičić, M. Radovanović, Ž. Popović, S. Vukmirović, “Textile-based microfluidic platform for detection of cytostatic drug concentration from sweat samples”, Applied Sciences (IF: 2.474), 10, 4392; 2020. ISSN: 2076-3417.
2. G. Stojanović, J. Nikodinović-Runić, S. Švenderman, T. Kojić, M. Radovanović, M. Mikov, D. Ranđelović, “Comprehensive characterization of elastomeric polyhydroxyalkanoate and its sensor applications”, Materials Science and Engineering: C (IF: 5.880), vol. 115, October 2020, 111091, https://doi.org/10.1016/j.msec.2020.111091
3. G. Stojanović, T. Kojić, M. Radovanović, D. Vasiljević, S. Panić, V. Srdić, J. Cvejić, “Flexible sensors based on two conductive electrodes and MWCNTs coating for efficient pH value measurement”, Journal of Alloys and Compounds (IF: 4.650), vol. 794, pp. 76-83, 2019, https://doi.org/10.1016/j.jallcom.2019.04.243, ISSN: 0925-8388.
4. G. Stojanović, M. Paroški, N. Samardžić, M. Radovanović, D. Krstić, “Microfluidics-based four fundamental electronic circuit elements resistor, inductor, capacitor and memristor”, Electronics (IF: 2. 412), vol. 8, no. 9, pp. 960-972, 2019, https://doi.org/10.3390/electronics8090960, ISSN: 2079-9292.
5. G. Stojanović, M. Radovanović, D. Krstić, I. Ignjatović, J. Dragaš, V. Carević, “Determination of pH in powdered concrete samples or in suspension”, Applied Sciences (IF: 2.474), 2019, 9(16), 3257.
Selektovani projekti (10):
1. “Embedding RRI in Western Balkan Countries: Enhancement of Self-Sustaining R&I Ecosystems - WBC-.RRI.NET” – WBC-RRI.NET (1.99 MEUR), H2020-SwafS-2020-1, no. 101006279, 2021-2024, Coordinator.
2. “Twinning for reaching sustainable scientific and technological excellence in the field of Green Electronics” – GREENELIT (0.89 MEUR) H2020-WIDESPREAD-2020-5, no. 951747, 2020-2023, Coordinator.
3. “ERA Chair for emerging technologies and innovative research in Stretchable and Textile Electronics” – STRENTEX, (2.47 MEUR) H2020-WIDESPREAD-2018-2020, no. 854194, 2020-2024, Coordinator.
4. “Innovative bio-inspired sensors and microfluidic devices for saliva-based theranostics of oral and systemic diseases” – SALSETH, (0.851 MEUR), H2020-MSCA-RISE-2019, 2019-2023, Coordinator.
5. “Innovative Network for Training in wAter and Food QUality monitoring using Autonomous SENSors and IntelligEnt Data Gathering and Analysis – AQUASENSE”, H2020-MSCA-ITN-2018, 2018-2022, Leader of FTS-UNS team.
6. “Cost-effective microfluidic electronic devices for optimal drug administration based on fractional pharmacokinetics for leukemia treatments - MEDLEM”, H2020-MSCA-RISE-2015, no. 690876, 2016-2019, Coordinator.
7. “Institutional framework for development of the third mission of universities in Serbia - IF4TM”, ERASMUS+, no. 561655-EPP-1-2015-1-RS-EPPKA2-CBHE-SP, Leader of UNS team.
8. “Students' mobility capacity building in higher education in Ukraine and Serbia - MILETUS”, ERASMUS, 2016-2019, Leader of UNS team.
9. “Cross-border Knowledge and Technology Transfer Platform to support young researchers and innovative SMEs and to catalyze their business-academia type cooperation”, IPA Cross border cooperation Hungary-Serbia, 2018-2020, Member of the UNS team.
10. “Low-cost and energy-efficient LTCC sensor/IR-UWB transceiver solutions for sustainable healthy environment – SENSEIVER”, FP7-PEOPLE-2011-ITN, no. 289481, Coordinator.
Selektovane nagrade i priznanja Prof. Dr. Goran Stojanović (5):
1. The gold medal (illustrated below) on the International symposium of patents and innovation technologies “ARCHIMEDES’2011“, Moscow, Russia, April 2011, for the innovation of the sensor for measuring water content in building materials.
2. Award for the best papers for adults at the International Power Electronics and Motion Control Conference EPE-PEMC’2010, Macedonia, for the paper “Performance Analysis of LTCC transformers for application in DC/DC converters”.
3. Second prize for the best paper at the 33rd IEEE Components, packaging, manufacturing and technology conference, Pszezyna, Poland, 21-24 September, 2009, for the paper entitled “A Sensitivity Improvement of Non Contact LTCC Resonant Sensor”.
4. Award as a best professor at the Faculty of Technical Sciences according to the anonymous evaluation of the teaching process from the side of the students, for the year 2008.
5. “Dr Zoran Đinđić” a prestigious national award as the best researcher (under the age 35) in Vojvodina, Serbia for the year 2007.
(M21a) Rad u međunarodnom časopisu izuzetnih vrednosti
Cvejin K., Sliwa M., Manjakkal L., Kulawik J., Stojanović G., Szwagierczak D.: Impedancemetric NO sensor based on YSZ/perovskite neodymium cobaltite operating at high temperatures , Sensors and Actuators B: Chemical, 2016, Vol. 228, pp. 612-624, ISSN 0925-4005
(M21a) Rad u međunarodnom časopisu izuzetnih vrednosti
Savić S., Stojanović G., Vasiljević D., Vojisavljević K., Dapčević A., Radojković A., Pršić S., Branković G.: Nanoindentation study of nickel manganite ceramics obtained by a complex polymerization method, Ceramics International, 2016, Vol. 42, No 10, pp. 12276-12282, ISSN 0272-8842
(M21) Rad u vrhunskom međunarodnom časopisu
Mooranian A., Zamani ., Mikov M., Goločorbin-Kon S., Stojanović G., Arfuso F., Al-Salami .: Novel nano-encapsulation of probucol in microgels: scanning electron micrograph characterizations, buoyancy profiling, and antioxidant assay analyses , Artificial Cells Nanomedicine and Biotechnology, 2018, pp. 1-7, ISSN 2169-1401
(M21) Rad u vrhunskom međunarodnom časopisu
Simic M., Manjakkal L., Zaraska K., Stojanović G., Ravinder D.: TiO2-Based Thick Film pH Sensor, IEEE Sensors Journal, 2017, Vol. 17, No 2, pp. 248-255, ISSN 1530-437X
(M21) Rad u vrhunskom međunarodnom časopisu
Jeranče N., Bednar N., Stojanović G.: An Ink-Jet Printed Eddy Current Position Sensor, Sensors, 2013, Vol. 13, pp. 5205-5219, ISSN 1424-8220, UDK: 10.3390/s130405205
(M21) Rad u vrhunskom međunarodnom časopisu
Menićanin A., Živanov Lj., Stojanović G., Samardžić N., Radjelović D.: Transport parameters of inkjet printed nanoparticle silver on polyimide substrate measured at room and liquid nitrogen temperatures , IEEE Transactions on Electron Devices, 2013, Vol. 60, No 9, pp. 2963-2967, ISSN 0018-9383
(M21) Rad u vrhunskom međunarodnom časopisu
Vučinić-Vasić M., Božin E., Bessais L., Stojanović G., Kozmidis-Luburić U., Abeykoon J., Bostjan M., Kremenović A., Antić B.: Thermal Evolution of Cation Distribution/Crystallite Size and Their Correlation with the Magnetic State of Yb-Substituted Zinc Ferrite Nanoparticles, Journal of Physical Chemistry C, 2013, Vol. 117, No 23, pp. 12358-12365, ISSN 1932-7447
(M21) Rad u vrhunskom međunarodnom časopisu
Samardžić N., Mionić M., Dakić B., Hofmann H., Dautović S., Stojanović G.: Analysis of Quantized Electrical Characteristics of Microscale TiO2 Ink-jet Printed Memristor, IEEE Transactions on Electron Devices, 2015, ISSN 0018-9383, UDK: 10.1109/TED.2015.2421283
(M21) Rad u vrhunskom međunarodnom časopisu
Stojanović G., Kitić G., Savić S., Crnojević-Bengin V.: Electrical Characterization of Nickel Manganite Powders in High-Frequency Range, Journal of Alloys and Compounds, 2013, Vol. 554, pp. 264-270, ISSN 0925-8388
(M21) Rad u vrhunskom međunarodnom časopisu
Milanović M., Stojanović G., Nikolić Lj., Radovanović M., Škorić B., Miletić A.: Electrical and structural characterisation of nanostructured titania coatings deposited on interdigitated electrode system, Materials chemistry and physics, 2011, Vol. 130, No 1-2, pp. 769-774, ISSN 0254-0584, UDK: 10.1016/j.matchemphys.2011.07.061
(M21) Rad u vrhunskom međunarodnom časopisu
Savić S., Mančić L., Vojisavljević K., Stojanović G., Branković Z., Aleksić O., Branković G.: Microstructural and electrical changes in nickel manganite powder induced by mechanical activation, Materials Research Bulletin, 2011, Vol. 46, No 7, pp. 1065-1071, UDK: 10.1016/j.materresbull.2011.03.008
(M21) Rad u vrhunskom međunarodnom časopisu
Jeranče N., Vasiljević D., Samardžić N., Stojanović G.: A Compact Inductive Position Sensor Made by Inkjet Printing Technology on a Flexible Substrate, Sensors, 2012, Vol. 12, pp. 1288-1298, ISSN 1424-8220, UDK: 10.3390/s120201288
(M21) Rad u vrhunskom međunarodnom časopisu
Stojanović G., Radovanović M., Malešev M., Radonjanin V.: Monitoring of Water Content in Building Materials Using a Wireless Passive Sensor, Sensors, 2010, Vol. 10, No 5, pp. 4270-4280, ISSN 1424-8220, UDK: 10.3390/s100504270
(M21) Rad u vrhunskom međunarodnom časopisu
Tripković Đ., Vukmirović J., Bajac B., Samardžić N., Đurđić E., Stojanović G., Srdić V.: Inkjet patterning of in situ sol–gel derived barium titanate thin films, Ceramics International, 2016, Vol. 42, pp. 1840-1846, ISSN 0272-8842
(M21) Rad u vrhunskom međunarodnom časopisu
Cvejin K., Sliwa M., Manjakkal L., Kulawik J., Stojanović G., Szwagierczak D.: Impedancemetric NO sensor based on YSZ/perovskite neodymium cobaltite operating at high temperatures , Sensors and Actuators B: Chemical, 2016, Vol. 228, pp. 612-624, ISSN 0925-4005
(M21) Rad u vrhunskom međunarodnom časopisu
Savić S., Stojanović G., Vasiljević D., Vojisavljević K., Dapčević A., Radojković A., Pršić S., Branković G.: Nanoindentation study of nickel manganite ceramics obtained by a complex polymerization method, Ceramics International, 2016, Vol. 42, No 10, pp. 12276-12282, ISSN 0272-8842
(M21) Rad u vrhunskom međunarodnom časopisu
Radovanović M., Mojić B., Cvejin K., Srdić V., Stojanović G.: A Wireless LC Sensor Coated with Ba0.9Bi0.066TiO3 for Measuring Temperature, Sensors, 2015, Vol. 15, pp. 11454-11464, ISSN 1424-8220
(M21) Rad u vrhunskom međunarodnom časopisu
Manjakkal L., Cvejin K., Kulawik J., Zaraska K., Szwagierczak D., Stojanović G.: Sensing mechanism of RuO2–SnO2 thick film pH sensors studied by potentiometric method and electrochemical impedance spectroscopy, Journal of Electroanalytical Chemistry, 2015, Vol. 759, pp. 82-90, ISSN 1572-6657
(M21) Rad u vrhunskom međunarodnom časopisu
Jeranče N., Bednar N., Stojanović G.: An Ink-Jet Printed Eddy Current Position Sensor, Sensors, 2013, Vol. 13, pp. 5205-5219, ISSN 1424-8220, UDK: 10.3390/s130405205
(M21) Rad u vrhunskom međunarodnom časopisu
Stojanović G., Kitić G., Savić S., Crnojević-Bengin V.: Electrical Characterization of Nickel Manganite Powders in High-Frequency Range, Journal of Alloys and Compounds, 2013, Vol. 554, pp. 264-270, ISSN 0925-8388
(M21) Rad u vrhunskom međunarodnom časopisu
Menićanin A., Živanov Lj., Stojanović G., Samardžić N., Radjelović D.: Transport parameters of inkjet printed nanoparticle silver on polyimide substrate measured at room and liquid nitrogen temperatures, IEEE Transactions on Electron Devices, 2013, Vol. 60, No 9, pp. 2963-2967, ISSN 0018-9383
(M22) Rad u istaknutom međunarodnom časopisu
Lečić N., Stojanović G., Đurić S., Laboure E.: Design and Analysis of Planar Symmetric Six-Phase Coupled Inductors, IEEE Transactions on Magnetics, 2015, No 99, pp. 1-8, ISSN 0018-9464, UDK: 10.1109/TMAG.2014.2383358
(M22) Rad u istaknutom međunarodnom časopisu
Vukmirović J., Tripković Đ., Bajac B., Kojić S., Stojanović G., Srdić V.: Comparison of barium titanate thin films prepared with inkjet printing and spin coating, Processing and Application of Ceramics, 2015, Vol. 9, pp. 151-156, ISSN 1820-6131
(M22) Rad u istaknutom međunarodnom časopisu
Đurić S., Stojanović G.: A Compact Planar Transformer With an Improved Winding Configuration, IEEE Transactions on Magnetics, 2014, Vol. 50, No 11, pp. 1-4, ISSN 0018-9464, UDK: 10.1109/TMAG.2014.2321630
(M22) Rad u istaknutom međunarodnom časopisu
Stojanović G., Mandić V., Ćurčić M., Vasiljević D., Kisić M., Radosavljević N.: Combining rapid prototyping techniques in mechanical engineering and electronics for realization of a variable capacitor, Rapid Prototyping Journal, 2014, Vol. 20, No 2, pp. 115-120, ISSN 1355-2546
(M22) Rad u istaknutom međunarodnom časopisu
Bednar N., Stojanović G.: An Organic Electronics Laboratory Course for Graduate Students in Electrical Engineering, IEEE Transactions on Education, 2013, Vol. 56, No 3, pp. 280-286, ISSN 0018-9359
(M22) Rad u istaknutom međunarodnom časopisu
Đurić S., Stojanović G., Damnjanović M., Laboure E.: Analysis of the Coupling Effect in Different Meander - Type Winding Planar Transformer, IEEE Transactions on Magnetics, 2013, Vol. 49, No 7, pp. 3993-3996, ISSN 0018-9464
(M22) Rad u istaknutom međunarodnom časopisu
Cvejin K., Mojić B., Srdić V., Stojanović G.: Dielectric studies of barium bismuth titanate as a material for application in temperature sensors, Journal of Materials Science: Materials in Electronics, 2013, Vol. 24, No 4, pp. 1243-1249, ISSN 0957-4522
(M22) Rad u istaknutom međunarodnom časopisu
Damnjanović M., Živanov Lj., Stojanović G., Menićanin A.: Influence of Conductive Layer Geometry on Maximal Impedance Frequency Shift of Zig-zag Ferrite EMI Suppressor, IEEE Transactions on Magnetics, 2010, Vol. 46, No 6, pp. 1303-1306, ISSN 0018-9464
(M22) Rad u istaknutom međunarodnom časopisu
Maksimović M., Stojanović G., Radovanović M., Malešev M., Radonjanin V., Radosavljević G., Smetana W.: Application of a LTCC sensor for measuring moisture content of building materials, Construction and Buildings Materials, 2012, Vol. 26, No 1, pp. 327-333, ISSN 0950-0618(02)00045-4, UDK: 10.1016/j.conbuildmat.2011.06.029
(M22) Rad u istaknutom međunarodnom časopisu
Bednar N., Matović J., Stojanović G.: Properties of Surface Dielectric Barrier Discharge Plasma Generator for Fabrication of Nanomaterials, Journal of Electrostatics, 2013, Vol. 71, No 6, pp. 1068-1075, ISSN 0304-3886
(M22) Rad u istaknutom međunarodnom časopisu
S. Đurić, G. Stojanović, M. Damnjanović, E. Laboure, „Analysis of the Coupling Effect in Different Meander- Type Winding Planar Transformers,“ IEEE Transactions on Magnetics, vol. 49, no 7, pp. 3993-3996, 2013, ISSN 0018-9464
(M22) Rad u istaknutom međunarodnom časopisu
K. Cvejin, B. Mojić, N. Samardžić, V. V. Srdić, G. M. Stojanović, “Dielectric studies of barium bismuth titanate as a material for application in temperature sensors”, Journal of Materials Science: Materials in Electronics, vol. 24, pp. 1243-1249, 2013, ISSN: 0957-4522
(M22) Rad u istaknutom međunarodnom časopisu
Samardžić N., Bajac B., Bajić J., Đurđić E., Miljević B., Srdić V., Stojanović G.: Photoresistive switching of multiferroic thin film memristors, Microelectronic Engineering, 2018, ISSN 0167-9317, UDK: 10.1016/j.mee.2017.10.018
(M22) Rad u istaknutom međunarodnom časopisu
Vasiljević D., Mansouri A., Anzi L., Sordan R., Stojanović G.: Performance Analysis of Flexible Ink-jet Printed Humidity Sensors Based on Graphene Oxide, IEEE Sensors Journal, 2018, Vol. 18, No 11, pp. 4378-4383, ISSN 1530-437X
Vasiljević D., Brajković D., Krklješ D., Obrenović B., Stojanović G.: Testing and Characterization of Multilayer Force Sensing Resistors Fabricated on Flexible Substrate, Informacije MIDEM - Journal of microelectronics, electronic components and materials, 2017, Vol. 47, No 1, pp. 40-48, ISSN 0352-9045
(M23) Rad u međunarodnom časopisu
Stojanović G., Lečić N., Kojić S., Vasiljević D.: Characterization of customized ferrite cores for a compact six-phase coupled inductor, International Journal of Applied Electromagnetics and Mechanics, 2018, Vol. 57, pp. 19-27, ISSN 1383-5416
(M23) Rad u međunarodnom časopisu
Thamphiwatana S., Phairatana T., Chirasatitsin S., Samae M., Velvé Casquillas G., Al-Salami H., Kojić S., Stojanović G.: A microfuidic micromixer fabricated using polydimethylsiloxane-based platform for biomedical applications, MIDEM - Journal of microelectronics, electronic components and materials, 2018, Vol. 48, No 3, pp. 173-179, ISSN 0352-9045, UDK: 621.3:(53+54+621+66)
(M23) Rad u međunarodnom časopisu
N. Bednar, J. Matović, G. Stojanović, “Properties of Surface Dielectric Barrier Discharge Plasma Generator for Fabrication of Nanomaterials”, Journal of Electrostatics, vol. 71, no 6, pp. 1068-1075, 2013, ISSN 0304-3886.
(M23) Rad u međunarodnom časopisu
N. Jeranče, G. Stojanović, Nataša Samardžić, Daniel Kesler, “Parallel computing applied to inductance calculation for flexible inductors”, COMPEL, vol. 32, no. 3, pp. 1067-1081, 2013, ISSN: 0332-1649.
(M23) Rad u međunarodnom časopisu
N. Bednar, G. Stojanović, “An Organic Electronics Laboratory Course for Graduate Students in Electrical Engineering”, IEEE Transactions on Education, 56 (3) pp. 280 - 286, 2013, ISSN: 0018-9359
(M23) Rad u međunarodnom časopisu
Stojanović G., Lečić N., Damnjanović M., Živanov Lj.: Electrical and temperature characterization of NiZn ferrites, INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS, 2011, Vol. 35, No 3, pp. 165-176, ISSN 1383-5416, UDK: 10.3233/JAE-2011-1329
(M23) Rad u međunarodnom časopisu
Goran Stojanović, Slavica Savić, Ljiljana Živanov, "Important Role of the Hall Effect Measurement System in a Modified Course of Materials in Electrical Engineering", IEEE Transaction on Education, vol. 52, no. 3, pp. 297- 304, 2009.
(M23) Rad u međunarodnom časopisu
Radonić V., Palmer K., Stojanović G., Crnojević-Bengin V.: Flexible Sierpinski Carpet Fractal Antenna on a Hilbert Slot Patterned Ground, International Journal of Antennas and Propagation, 2012, Vol. 2012, No 980916, pp. 1-7, ISSN 1687-5869, UDK: 10.1155/2012/980916
(M23) Rad u međunarodnom časopisu
Satarić M., Bednar N., Satarić B., Stojanović G.: Actin filaments as nonlinear RLC transmission lines, International Journal of Modern Physics B, 2009, Vol. 23, No 22, pp. 4697-4711, ISSN 0217-9792, UDK: 10.1142/S021797920905331X
(M23) Rad u međunarodnom časopisu
Pajkanovic A., Stojanović G., Đurić S.: Performance analysis of meander-type inductor in silicon and flexible technology, Microelectronics Journal, 2016, Vol. 56, pp. 57-64, ISSN 0026-2692
(M23) Rad u međunarodnom časopisu
Krklješ D., Stojanović G.: An Ink-Jet Printed Capacitive Sensor for Angular Position/Velocity Measurements, Advances in Electrical and Computer Engineering, 2016, Vol. 16, No 4, pp. 77-82, ISSN 1582–7445
(M23) Rad u međunarodnom časopisu
Simić M., Babić Z., Risojević V., Stojanović G.: Novel Non-Iterative Method for Real-Time Parameter Estimation of the Fricke-Morse Model, Advances in Electrical and Computer Engineering, 2016, Vol. 16, No 4, pp. 57-62, ISSN 1582–7445
(M23) Rad u međunarodnom časopisu
Milinković B., Milićević M., Simić Đ., Stojanović G., Đurić R.: Low-pass filter for UWB system with the circuit for compensation of process induced on-chip capacitor variation , Informacije MIDEM - Journal of microelectronics, electronic components and materials, 2015, Vol. 45, No 4, pp. 266-276, ISSN 0352-9045
(M23) Rad u međunarodnom časopisu
Kojić S., Ajkalo S., Gužvica M., Vasiljević D., Radovanović M., Stojanović G.: A Counter of Number of Products on the Shelf – Influences on Capacitance of Interdigitated Capacitor with Application in Intelligent Packaging, Informacije MIDEM - Journal of microelectronics, electronic components and materials, 2014, Vol. 44, No 4, pp. 321-329, ISSN 0352-9045, UDK: 621.3:(53+54+621+66)
(M23) Rad u međunarodnom časopisu
Krklješ D., Vasiljević D., Stojanović G.: A Capacitive Angular Sensor with Flexible Digitated Electrodes, Sensor Review, 2014, Vol. 34, No 4, pp. 382-388, ISSN 0260-2288
(M23) Rad u međunarodnom časopisu
Đurić S., Stojanović G., Damnjanović M., Laboure E.: Analysis of the Coupling Effect in Different Meander- Type Winding Planar Transformers, IEEE Transactions on Magnetics, 2013, Vol. 49, No 7, pp. 3993-3996, ISSN 0018-9464
(M23) Rad u međunarodnom časopisu
Jeranče N., Stojanović G., Samardžić N., Kesler D.: Parallel computing applied to inductance calculation for flexible inductors, COMPEL - The international journal for computation and mathematics in electrical engineering, 2013, Vol. 32, No 3, pp. 1067-1081, ISSN 0332-1649, UDK: 10.1108/03321641311306097
(M23) Rad u međunarodnom časopisu
Samardžić N., Jeranče N., Stojanović G.: Novel Solution for Flexible Inductive Position Sensor, Sensor Letters, 2013, Vol. 11, No 10, pp. 1881-1886, ISSN 1546-198X
(U01) Osnovni udžbenik za nastavni predmet
G. Stojanović, "Nanoelektronika i primena nanomaterijala", Edicija tehničke nauke - Udžbenici, FTN Izdavaštvo (338), Novi Sad, 2012.
(U01) Osnovni udžbenik za nastavni predmet
G. Stojanović, Lj. Živanov, "Materijali u elektrotehnici", Edicija Tehničke Nauke - Udžbenici, FTN izdavaštvo, Novi Sad, 2007.
(M22) Rad u istaknutom međunarodnom časopisu
Slavica Savić, Goran Stojanović, Maria Vesna Nikolić, Obrad Aleksić, Danijela Luković-Golić, Pantelija Nikolić, “Electrical and transport properties of nickel manganite obtained by Hall effect measurements”, Journal of Materials Science: Materials in Electronics, DOI 10.1007/s10854-008-9710-5, 2008
(M22) Rad u istaknutom međunarodnom časopisu
Goran Stojanović, Vladimir Srdić, Marija Maletin, “Electrical properties of yttrium-doped Zn and Ni–Zn ferrites”, Physica Status Solidi (a), vol. 205, no. 10, pp. 2464-2468, 2008
(M22) Rad u istaknutom međunarodnom časopisu
Goran Stojanović, Mirjana Damnjanović, Ljiljana Živanov, “Temperature dependence of electrical parameters of SMD ferrite components for EMI suppression”, Microelectronics Reliability, vol. 48, no. 7, pp. 1027-1032, July 2008.
(M22) Rad u istaknutom međunarodnom časopisu
M. Damnjanović, G. Stojanović, V. Desnica, Lj. Živanov, R. Raghavendra, P. Bellew, N. Mcloughlin, “Analysis, design and characterization of ferrite EMI suppressors,” IEEE Transactions on Magnetics, vol. 42, no. 2, pp. 270-277, February 2006.
(M22) Rad u istaknutom međunarodnom časopisu
G. Stojanović, M. Damnjanović, V. Desnica, Lj. Živanov, R. Raghavendra, P. Bellew, N. Mcloughlin, “High performance zig-zag and meander inductors embedded in ferrite material,” Journal of Magnetism and Magnetic Materials, vol. 297/2, pp. 76-83, February 2006.
(M22) Rad u istaknutom međunarodnom časopisu
R. Raghavendra, P. Bellew, N. Mcloughlin, G. Stojanović, M. Damnjanović, V. Desnica, Lj. Živanov, “Characterization of Novel Varistor+Inductor Integrated Passive Devices,” IEEE Electron Devices Letters, vol. 25, no. 12, pp. 778-780, December 2004.
(M23) Rad u međunarodnom časopisu
Mirjana Damnjanović, Goran Stojanović, Ljiljana Živanov, "An educational software tool for design of ferrite EMI suppressors", International Journal of Electrical Engineering Education, vol. 46, no. 3, pp. 225- 238, 2009.
(M23) Rad u međunarodnom časopisu
M. Damnjanović, G. Stojanović, Lj. Živanov, V. Desnica, “Comparison of different structures of ferrite EMI suppresors,“ Microelectronics International, vol. 23, no. 3, pp. 42-48, September 2006.
(M23) Rad u međunarodnom časopisu
G. Stojanović, Lj. Živanov, “Novel efficient method for inductance calculation of inductors with optimized layout,” International Journal of RF and Microwave Computer-Aided Engineering, vol. 16, no. 5, pp. 463-469, September 2006.
(M23) Rad u međunarodnom časopisu
G. Stojanović, Lj. Živanov, M. Damnjanović, “Novel efficient methods for inductance calculation of meander inductor,“ COMPEL - The international journal for computation and mathematics in electrical engineering, vol 25, no. 4, pp. 916-928, December 2006.
