doc. dr Jovan Šulc


Nedostaje slika

dr Jovan Šulc

Docent


Telefon021/485-2128
E-mail
Akademsko zvanjeDocent
KancelarijaLaboratorija 125
Trenutno nema podataka o biografiji zaposlenog!
Docent
01.02.2017.
Radno mestoOdDoOrganizaciona jedinica
Asistent sa doktoratom23.09.2016.Katedra za mehatroniku, robotiku i automatizaciju
Asistent-Master01.12.2013.01.09.2016.Katedra za mehatroniku, robotiku i automatizaciju
NazivU Ustanovi
Kvantifikacija curenja vazduha pod pritiskom

Diploma

Matematičke nauke

Povišenje energetske efikasnosti programabilnog pneumatskog manipulatora u kontaktnim zadacima

Doktorat

Industrijsko inženjerstvo i inženjerski menadžment

Fakultet tehničkih nauka

2016

Kriterijum produkcijeOpis
(M22) Rad u istaknutom međunarodnom časopisuŠešlija D., Milenković I., Dudić S., Šulc J.: Improving Energy Efficiency in Compressed Air Systems - Practical Experiences, Thermal Science, 2016, ISSN 0354-9836
(M22) Rad u istaknutom međunarodnom časopisuŠulc J., Bajči B., Reljić V., Milenković I., Šešlija D., Dudić S.: Automatic manipulator for remote measurement of linear dimensions—development and integration in education courses, Computer Applications in Engineering Education, 2018, Vol. 26, No 4, pp. 947-958, ISSN 1061-3773
(M22) Rad u istaknutom međunarodnom časopisuReljić V., Milenković I., Bajči B., Šešlija D., Šulc J.: Remotely controlled compressed air spring—Design and implementation for distance education, Computer Applications in Engineering Education, 2018, pp. 1-10, ISSN 1061-3773
(M23) Rad u međunarodnom časopisuŠešlija D., Čajetinac S., Blagojević V., Šulc J.: Application of pulse width modulation and by-pass valve control for increasing energy efficiency of pneumatic actuator system, Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 2018, ISSN 0959-6518
(M33) Saopštenje sa međunarodnog skupa štampano u celiniBajči B., Reljić V., Šulc J., Šešlija D., Dudić S.: Remotely Controlled Measurement of Linear Dimensions, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad: Faculy of Technical Scicences, Novi Sad, 8-10 Jun, 2017, pp. 1-4, ISBN 978-86-7892-934-2
(M33) Saopštenje sa međunarodnog skupa štampano u celiniReljić V., Bajči B., Šulc J., Šešlija D., Dudić S.: Remote Control of Pneumatic Circular Manipulator Using CEyeClon Platform, 4. Experiment@ International Conference, Faro: University of Algarve, Faro, 6-8 Jun, 2017, pp. 103-104, ISBN 978-1-5386-0810-4
(M33) Saopštenje sa međunarodnog skupa štampano u celiniŠulc J., Šešlija D., Reljić V., Bajči B., Čajetinac S.: PWM Control of Coupled Motion of Two Axis Pneumatic Programmable Manipulator, 13. International Conference on Systems, Automatic Control and Measurements SAUM, Niš, 9-11 Novembar, 2016
(M33) Saopštenje sa međunarodnog skupa štampano u celiniŠešlija D., Šulc J., Dudić S., Milenković I.: Remote control of pneumatic actuator via wireless communication, 16. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Faculty of Technical Sciences, Department of Industrial Engineering and Management, 15-17 Oktobar, 2014, pp. 107-111, ISBN 978-86-7892-652-5
(M33) Saopštenje sa međunarodnog skupa štampano u celiniŠulc J., Reljić V., Bajči B., Šešlija D.: Design and Development of Experimental Setup for Analysis and Synthesis of Control Laws in Manipulator Contact with Environment, 3. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina: Faculty of Mechanical Engineering, East Sarajevo, 7-9 Decembar, 2016, pp. 87-92, ISBN 978-99976-623-7-8
(M33) Saopštenje sa međunarodnog skupa štampano u celiniReljić V., Vidicki P., Bajči B., Šešlija D., Šulc J.: Using of remote controlled pneumatic spring in teaching, 6. Technics and Informatics in Education - TIE, Čačak: Faculty of Technical Sciences, Čačak, 28-29 Maj, 2016, pp. 391-396, ISBN 978-86-7776-192-9, UDK: 621.398:37.018.43
(M33) Saopštenje sa međunarodnog skupa štampano u celiniReljić V., Bajči B., Šulc J., Šešlija D., Dudić S.: Remote control of pneumatic circular manipulator using CompactRIO controller, 6. Technics and Informatics in Education - TIE, Čačak: Faculty of Technical Sciences, Čačak, 28-29 Maj, 2016, pp. 385-390, ISBN 978-86-7776-192-9, UDK: 621.398:621.316]:004.738.5
(M33) Saopštenje sa međunarodnog skupa štampano u celiniReljić V., Šešlija D., Šulc J., Bajči B., Dudić S., Milenković I.: Modular Construction of Circular Manipulator as a Test Bed for Testing Pneumatic Control, 9. The 9th International Symposium - KOD 2016 - Machine and Industrial Design in Mechanical Engineering, Balatonfured: Faculty of Technical Sciences, Novi Sad, Faculty of Engineering, Hunedoara, Faculty of Engineering, Szeged, 9-12 Jun, 2016, pp. 225-228, ISBN 978-86-7892-821-5
(M33) Saopštenje sa međunarodnog skupa štampano u celiniSrndaljčević V., Bajči B., Šešlija D., Šulc J., Reljić V., Dudić S., Milenković I.: Image Analysis as a Method of Quantifying the Effectivness of Pneumatic Nozzles, 3. International Conference on Electrical, Electronic and Computing Engineering IcETRAN, Zlatibor: ETRAN Society, School of Electrical Engineering, 13-16 Jun, 2016, pp. 1-4, ISBN 978-86-7466-618-0
(M33) Saopštenje sa međunarodnog skupa štampano u celiniŠulc J., Reljić V., Bajči B., Šešlija D., Buač T.: Development of Pneumatic Valve Remote Control, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad: Faculy of Technical Scicences, Novi Sad, 8-10 Jun, 2017, pp. 1-4, ISBN 978-86-7892-934-2
(M33) Saopštenje sa međunarodnog skupa štampano u celiniBajči B., Dudić S., Šulc J., Milenković I., Šešlija D., Reljić V.: Remote System for Measuring Geometric Tolerances: Roundness, 13. International Conference on Remote Engineering and Virtual Instrumentation - REV, Madrid: UNED Madrid, 24-26 Februar, 2016, pp. 279-280, ISBN 978-1-4673-8245-8
(M33) Saopštenje sa međunarodnog skupa štampano u celiniŠulc J., Šešlija D., Srndaljčević V.: Influence of Pneumatic Cylinder Damping on Consumption of Compressed Air, 3. Regional Conference - Mechatronics in Practice and Education (MECHEDU), Subotica, 14-16 Maj, 2015, pp. 175-178, ISBN 978-86-918815-0-4, UDK: 007.5(082)
(M33) Saopštenje sa međunarodnog skupa štampano u celiniŠulc J., Šešlija D., Dudić S., Milenković I.: Implementation of Remote Laboratory for Measuring Linear Dimensions in the Process of e-Learning, 3. Experiment@ International Conference, Azores, 2-4 Jun, 2015, pp. 65-66, ISBN 978-989-20-5753-8
(M33) Saopštenje sa međunarodnog skupa štampano u celiniReljić V., Milenković I., Šešlija D., Dudić S., Šulc J.: Development of Remote Controlled Pneumatic Spring, 12. International Scientific Conference "Flexible Technologies" - MMA, Andrevlje: Faculty of Technical Sciences, Novi Sad, 25-26 Septembar, 2015, pp. 195-198, ISBN 978-86-7892-722-5
(M33) Saopštenje sa međunarodnog skupa štampano u celiniŠešlija D., Šulc J.: Modeling of Robotic Tool Penetration in Workpiece using FEM, 2. Regional Conference - Mechatronics in Practice and Education (MECHEDU), Subotica: Subotica Tech - College of Applied Sciences, 5-6 Decembar, 2013, pp. 75-78, ISBN 978-86-7892-565-8
(M33) Saopštenje sa međunarodnog skupa štampano u celiniBajči B., Dudić S., Šulc J., Reljić V., Šešlija D., Milenković I.: Using Remotely Controlled One-way Flow Control Valve for Speed Regulation of Pneumatic Cylinder, 15. International Conference on Remote Engineering and Virtual Instrumentation, Dusseldorf: University of Applied Sciences Duesseldorf, Germany, 21-23 Mart, 2018, pp. 8-15
(M33) Saopštenje sa međunarodnog skupa štampano u celiniBajči B., Šulc J., Reljić V., Šešlija D., Dudić S., Milenković I.: Remote Laboratory for Learning Basics of Pneumatic Control, 14. International Conference on Remote Engineering and Virtual Instrumentation - REV, New York: Columbia University, New York, 15-17 Mart, 2017, pp. 144-150, ISBN 978-3-319-64351-9
(M33) Saopštenje sa međunarodnog skupa štampano u celiniBajči B., Reljić V., Šulc J., Šešlija D., Dudić S.: Remotely Controlled Measurement of Linear Dimensions, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad: Faculty of Technical Sciences, Novi Sad, 8-10 Jun, 2017, pp. 1-4, ISBN 978-86-7892-934-2
(M33) Saopštenje sa međunarodnog skupa štampano u celiniŠulc J., Reljić V., Bajči B., Šešlija D., Buač T.: Development of Pneumatic Valve Remote Control, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad: Faculty of Technical Sciences, Novi Sad, 8-10 Jun, 2017, pp. 1-4, ISBN 978-86-7892-934-2
(M33) Saopštenje sa međunarodnog skupa štampano u celiniBajči B., Reljić V., Milenković I., Šulc J., Vidicki P.: Using a Remotely Controlled Automated Device for Measuring Linear Dimensions in Teaching Activities in Secondary Vocational Schools, 17. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Faculty of Technical Sciences, 4-6 Oktobar, 2017, pp. 142-147, ISBN 978-86-7892-978-6
(M33) Saopštenje sa međunarodnog skupa štampano u celiniŠulc J., Bajči B., Šešlija D., Dudić S.: Case studies – reducing consumption of compressed air in casings food industry , 17. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Faculty of Technical Sciences, 4-6 Oktobar, 2017, pp. 102-107, ISBN 978-86-7892-978-6
(M33) Saopštenje sa međunarodnog skupa štampano u celiniMilenković I., Šešlija D., Dudić S., Šulc J.: Waste oil management in compressed air systems – regulation analysis, 16. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Faculty of Technical Sciences, Department of Industrial Engineering and Management, 15-17 Oktobar, 2014, pp. 33-37, ISBN 978-86-7892-652-5
(M33) Saopštenje sa međunarodnog skupa štampano u celiniŠešlija D., Šulc J., Reljić V.: Energy Efficient Pneumatic Control Scheme with Recirculation of the Used Air, 2. Regional Conference - Mechatronics in Practice and Education (MECHEDU), Subotica: Subotica Tech - College of Applied Sciences, 5-6 Decembar, 2013, pp. 71-74, ISBN 978-86-7892-565-8
(M33) Saopštenje sa međunarodnog skupa štampano u celiniBajči B., Šulc J., Reljić V., Šešlija D., Dudić S., Milenković I.: Remote Laboratory for Learning Basics of Pneumatic Control, 14. International Conference on Remote Engineering and Virtual Instrumentation - REV, New York: Columbia University, New York, 15-17 Mart, 2017, pp. 118-124
(M53) Rad u naučnom časopisuReljić V., Bajči B., Milenković I., Šulc J., Šešlija D., Dudić S.: Development of an Experimental Setup for Remote Testing of Pneumatic Control, International Journal of Online Engineering (iJOE), 2018, Vol. 14, No 1, pp. 195-202, ISSN 1861-2121
(M53) Rad u naučnom časopisuReljić V., Šešlija D., Šulc J.: Razvoj daljinski upravljane pneumatske opruge, Zbornik radova Fakulteta tehničkih nauka, 2014, No 8/2014, pp. 1781-1784, ISSN 0350-428X, UDK: 681.5
(M53) Rad u naučnom časopisuŠulc J.: Kvantifikacija curenja vazduha pod pritiskom, Zbornik radova Fakulteta tehničkih nauka, 2009, No 5/2009, pp. 1797-1800, ISSN 0350-428X
(M53) Rad u naučnom časopisuŠulc J., Šešlija D., Dudić S., Milenković I.: Remote Laboratory for Measuring Linear Dimensions in the Process of E-Learning, International Journal of Online Engineering (iJOE), 2016, Vol. 12, No 4, ISSN 1861-2121
(M53) Rad u naučnom časopisuSrndaljčević V., Šulc J., Šešlija D.: Razvoj uređaja za ispitivanje energetske efikasnosti pneumatskih mlaznica, Zbornik radova Fakulteta tehničkih nauka, 2015, No 11/2015, pp. 2153-2156, ISSN 0350-428X, UDK: 621.8
(M53) Rad u naučnom časopisuBajči B., Šulc J., Šešlija D.: Modeliranje PWM upravljanja dvoosnim pneumatskim manipulatorom, Zbornik radova Fakulteta tehničkih nauka, 2015, No 11/2015, pp. 2149-2152, ISSN 0350-428X, UDK: 007.5
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celiniReljić V., Šešlija D., Dudić S., Milenković I., Šulc J., Bajči B.: Upravljanje na daljinu pneumatskim kružnim manipulatorom, 22. Trendovi razvoja TREND, Zlatibor: Fakultet tehničkih nauka, Novi Sad, 16-19 Februar, 2016, pp. 103-106, ISBN 978-86-7892-795-9
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celiniŠulc J., Reljić V., Bajči B., Šešlija D.: Design and Development of Experimental Setup for Analysis and Synthesis of Control Laws in Manipulator Contact with Environment, 3. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina: Faculty of Mechanical Engineering, East Sarajevo, 7-9 Decembar, 2016, pp. 87-92, ISBN 978-99976-623-7-8
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celiniReljić V., Milenković I., Šešlija D., Dudić S., Šulc J.: Development of Remote Controlled Pneumatic Spring, 12. International Scientific Conference "Flexible Technologies" - MMA, Andrevlje: Faculty of Technical Sciences, Novi Sad, 25-26 Septembar, 2015, pp. 195-198, ISBN 978-86-7892-722-5
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celiniŠulc J., Šešlija D., Reljić V., Milenković I., Dudić S.: Razvoj i implementacija daljinskog upravljanja opruge u kursevima mehatroničkog i industrijskog inženjerstva, 59. ETRAN - Konferencija za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku, Srebrno jezero: Etran, Društvo za ETRAN, Elektrotehnički fakultete, Beograd, 8-11 Jun, 2015, pp. 1-4, ISBN 978-86-80509-72-3
(M71) Odbranjena doktorska disertacijaŠulc J.: Povišenje energetske efikasnosti programabilnog pneumatskog manipulatora u kontaktnim zadacima, Novi Sad, Fakultet tehničkih nauka, 2016
(M85) Prototip, nova metoda, softver, standardizovan ili atestiran instrument,Reljić V., Milenković I., Šešlija D., Dudić S., Šulc J.: Dalјinski upravlјana pneumatska opruga, 2015
(M85) Prototip, nova metoda, softver, standardizovan ili atestiran instrument,Tanović M., Šešlija D., Šulc J., Milenković I., Dudić S.: Dalјinsko upravlјanje pneumatskim cilindrom, 2015
(M85) Prototip, nova metoda, softver, standardizovan ili atestiran instrument,Dudić S., Šulc J., Bajči B., Milenković I., Šešlija D.: Manipulator za automatsko merenјe dužinskih mera u laboratorijskim uslovima, 2015
(M85) Prototip, nova metoda, softver, standardizovan ili atestiran instrument,Šulc J., Dudić S., Šešlija D., Milenković I.: Laboratorijski uređaj za dalјinsko merenje dužinskih mera primenom digitalnog pomičnog merila, 2015
(M85) Prototip, nova metoda, softver, standardizovan ili atestiran instrument,Bajči B., Reljić V., Dudić S., Šulc J., Milenković I., Šešlija D.: Automatski uređaj za merenje tolerancija oblika - kružnost, 2018
ZvanjeUža naučna oblastVisokoškolska ustanovaDatum izbora
DocentMehatronika, robotika i automatizacija i integrisani sistemiUniverzitet u Novom Sadu01.02.2017.
Asistent-masterMehatronika, robotika i automatizacija i integrisani sistemiFakultet tehničkih nauka01.12.2016.
Asistent-masterMehatronika, robotika i automatizacija i integrisani sistemiFakultet tehničkih nauka01.12.2013.
Stipendista Min.nauke na dokt.studijamaMehatronika, robotika i automatizacija14.11.2012.