I was born in Sremska Mitrovica, Serbia, on March 26th, 1988. I finished primary school in Sasinci. After that, I finished secondary technical school Nikola Tesla in Sremska Mitrovica. Undergraduate studies I started on The University of Novi Sad, Faculty of Technical Sciences, where I received the bachelor degree in Production Engineering on October, 2011 with average grade 9.85 of 10.00. I defended the Bachelor thesis: Development of a Database for Automated Selection of Universal Fixtures, with top grade 10. Continued master studies at the same faculty, I received the master degree in Production Engineering on December, 2012 with average grade 10.00 of 10.00. I defend the Master thesis: Development a System for Multi-Criteria Assessment of Fixtures, with grade 10.
After finished master studies I was offered a position of a Teaching Assistant in Materials and Joining Technologies at the Department of Production Engineering, Faculty of Technical Sciences, Novi Sad. Simultaneously, I attend the postgraduate PhD studies, at the same faculty. My PHD thesis is “Influence of activated flux on the penetration depth in non-consumable electrode welding of stainless steel in inert gas shielding”.
Actively involved in project no. 451-03-68/2020-14/200156: “Innovative scientific and artistic research from the FTS (activity) domain” funded by the Ministry of Education, Science and Technological Development of Serbia, the international project COST CA15102 – “Solutions for Critical Raw Materials Under Extreme Conditions (CRM-EXTREME), COST CA18120 “Reliable roadmap for certification of bonded primary structures”.
I were involved in successful finished projects of technological development TR34015 “Design, development and implementation of the new generation of ADI and Technology transfer facility (TTF) project 1073 „Activated Flux Based on Nano and Micro Particles for TIG Welding“.
My field of interest is welding processes (GTAW, FSW), advance iron based materials, ceramics, composite, etc.
I published 70 papers, which of international journals SCI/SCIe 13 papers, and 5 technical solutions.
() Research published in the top international journal
Janjatović P., Erić Cekić O., Šiđanin (Sidjanin) L., Baloš S., Dramićanin M., Grbović Novaković J., Rajnović D.: The Effect of Water Concentration in Ethyl Alcohol on the Environmentally Assisted Embrittlement of Austempered Ductile Irons , Metals, 2021, Vol. 11, No 94, pp. 1-16, ISSN 2075-4701
() Research published in the top international journal
Baloš S., Dramićanin M., Janjatović P., Zabunov I., Klobčar D., Bušić M., Grilli M.: Metal Oxide Nanoparticle-Based Coating as a Catalyzer for A-TIG Welding: Critical Raw Material Perspective, Metals, 2019, Vol. 9, No 5/567, pp. 1-12, ISSN 2075-4701
() Research published in the top international journal
Baloš S., Dramićanin M., Janjatović P., Zabunov I., Pilić B., Goel S., Szutkowska M.: Suppressing the Use of Critical Raw Materials in Joining of AISI 304 Stainless Steel Using Activated Tungsten Inert Gas Welding, Metals, 2019, Vol. 9, No 11/1187, pp. 1-13, ISSN 2075-4701
() Research published in the top international journal
Baloš S., Janjatović P., Dramićanin M., Labus Zlatanović D., Pilić B., Hanus P., Jaworska L.: Microstructure, Microhardness, and Wear Properties of Cobalt Alloy Electrodes Coated with TiO2 Nanoparticles, Metals, 2019, Vol. 9, No 11/1186, pp. 1-10, ISSN 2075-4701
() Research published in the top international journal
Janjatović P., Erić Cekić O., Šiđanin (Sidjanin) L., Baloš S., Dramićanin M., Grbović Novaković J., Rajnović D.: The Effect of Water Concentration in Ethyl Alcohol on the Environmentally Assisted Embrittlement of Austempered Ductile Irons , Metals, 2021, Vol. 11, No. 94, pp. 1-16, ISSN 2075-4701
() Research published in the top international journal
Baloš S., Radisavljević I., Rajnović D., Dramićanin M., Tabaković S., Erić-Cekić O., Šiđanin (Sidjanin) L.: Geometry, mechanical and ballistic properties of ADI material perforated plates, Materials and Design, 2015, Vol. 83, pp. 66-74, ISSN 0261-3069
() Research published in the top international journal
Baloš S., Šiđanin (Sidjanin) L., Dramićanin M., Labus Zlatanović D., Pilić B., Jovičić M.: Modification of Cellulose and Rutile Welding Electrode Coating by Infiltrated TiO2 Nanoparticles, Metals and Materials International, 2016, Vol. 22, No 3, pp. 509-518, ISSN 1598-9623
() Research published in the international journal
Baloš S., Šiđanin (Sidjanin) L., Dramićanin M., Labus Zlatanović D., Antić A.: FSW welding of Al-Mg alloy plates with increased edge roughness using square pin tools of various shoulder geometries, Materiali in Tehnologije, 2016, Vol. 50, No 3, pp. 387-394, ISSN 1580-2949
() Research published in the international journal
Dramićanin M., Baloš S., Janjatović P., Zabunov I., Grabulov V.: ACTIVATED FLUX TIG WELDING OF STAINLESS-STEEL PIPES , Chemical Industry & Chemical Engineering Quarterly / CI&CEQ, 2019, Vol. 25, No 4, pp. 353-360, ISSN 1451-9372, UDK: 621.791:669.14.018.8
() Research published in the international journal
Baloš S., Rajnović D., Dramićanin M., Labus Zlatanović D., Erić-Cekić O., Grbović-Novaković J., Šiđanin (Sidjanin) L.: Abrasive wear behaviour of ADI material with various retained austenite content, International Journal of Cast Metals Research, 2016, Vol. 29, No 4, pp. 187-193, ISSN 1364-0461
() Research published in the international journal
Baloš S., Radisavljević I., Rajnović D., Janjatović P., Dramićanin M., Erić Cekić O., Šiđanin (Sidjanin) L.: Ballistic Behaviour of Austempered Compacted Graphite Iron Perforated Plates, Defence Science Journal, 2019, Vol. 69, No 6, pp. 571-576, ISSN 0011-748X
() Research published in the journal of the international importance verified by the special resolution
Baloš S., Rajnović D., Labus Zlatanović D., Dramićanin M., Šiđanin (Sidjanin) L., Rakita M., Skakun (Francuski) P.: Failure of a Combine Harvester Front Axle, Integritet i vek konstrukcija, 2016, Vol. 16, No 2, pp. 95-98, ISSN 1451-3749
() Report from the international meeting printed in its entirety
Dramićanin M., Baloš S., Rajnović D., Šiđanin (Sidjanin) L., Labus Zlatanović D., Erić-Cekić O.: Cavitation behaviour of ADI materials in water, 9. International seminar "Advanced Manufacturing Technologies" - AMT, Sozopol, 25-30 Jun, 2015, pp. 95-98, ISBN 1313-4264
() Report from the international meeting printed in its entirety
Baloš S., Dramićanin M., Labus Zlatanović D., Janjatović P., Šiđanin (Sidjanin) L.: GMAW welding of MPM sheets in active gas, 8. The International Conference "Innovative technologies for joining advanced materials" - TIMA, Timisoara: National R&D institute for welding and material testing - ISIM Timisoara, 2-3 Jun, 2016, pp. 75-78
() Report from the international meeting printed in extracts
Dramićanin M., Baloš S., Rajnović D., Labus Zlatanović D., Janjatović P., Erić Cekić O., Šiđanin (Sidjanin) L.: The microstructure influence on abrasive wear behaviour of ductile irons, 16. European Microscopy Congress, Lyon, 29-2 Avgust, 2016, pp. 1-2
