() Researches published in the journals of the international importance
Rajnović D., Baloš S., Šiđanin (Sidjanin) L., Eric Cekic O., Grbovic Novakovic J.: Tensile properties of ADI material in water and gaseous environments, Materials Characterization, 2015, Vol. 101, pp. 26-33, ISSN 1044-5803
() Researches published in the journals of the international importance
Dojčinović M., Erić O., Rajnović D., Šiđanin (Sidjanin) L., Baloš S.: Effect of austempering temperature on cavitation behaviour of unalloyed ADI material, Materials Characterization, 2013, Vol. 82, pp. 66-72, ISSN 1044-5803
() Research published in the top international journal
Eric Cekic O., Šiđanin (Sidjanin) L., Rajnović D., Baloš S.: Austempering kinetics of Cu-Ni alloyed austempered ductile iron, Metals and Materials International, 2014, Vol. 20, No 6, pp. 1131-1138, ISSN 1598-9623
() Research published in the top international journal
Alexandrov S., Šiđanin (Sidjanin) L., Vilotić D., Movrin D., Lang L.: Generation of layer of Severe plastic deformation near fraction surfaces in upsetting of steel specimens, Metals, 2018, Vol. 8, pp. 1-9, ISSN 2075-4701
() Research published in the top international journal
Baloš S., Šiđanin (Sidjanin) L., Dramićanin M. Labus D. Pilić B., Jovičić M. : Modification of Cellouse and Rutile Welding Electrode Coating by Infiltrated TiO2 Nanoparticles, Metals and Materials International, 2016, Vol. 2, pp. 509-518, ISSN 1598-9623
() Research published in the top international journal
Baloš S. , Radisavljević I., Rajnović D., Dramićanin M., Tabaković S., Erić-Cekić O., Šiđanin (Sidjanin) L.: Geometry, mechanical and ballisic properties of ADI material perforated plates, Materials & Design, 2015, Vol. 83, pp. 66-74, ISSN 0264-1275
() Research published in the top international journal
Vilotić D., Alexandrov S., Šiđanin (Sidjanin) L., Vilotić M.: The influence of torsional and tensile pre-straining on the validity of ductile fracture criteria, International Journal of Damage Mechanics, 2014, Vol. 23, No 1, pp. 63-82, ISSN 1056-7895
() Research published in the top international journal
Radisavljevic I., Baloš S., Nikacevic M., Šiđanin (Sidjanin) L.: Optimization of geometrical characteristics of perforated plates, Materials and Design, 2013, Vol. 49, pp. 81-89, ISSN 0261-3069
() Research published in the top international journal
Baloš S., Šiđanin (Sidjanin) L.: Metallographic study of non-homogenousarmour impacted by armour-piercing incendiary ammunition, Materials and Design, 2011, Vol. 32, pp. 4022-4029, ISSN 0261-3069
() Research published in the top international journal
Baloš S., Grabulov V., Šiđanin (Sidjanin) L., Pantić M., Radisavljevic I.: Geometry, mechanical properties and mounting of perforated plates for ballistic application, Materials and Design, 2010, Vol. 31, pp. 2916-2924, ISSN 0261-3069
() Research published in the top international journal
Baloš S., Grabulov V., Šiđanin (Sidjanin) L., Pantić M.: Wire fence as applique armor, Materials and Design, 2010, Vol. 31, pp. 1293-1301, ISSN 0261-3069
() Research published in the top international journal
Baloš S., Šiđanin (Sidjanin) L.: Microdeformation of soft particles in metal matrix composites, Journal of Materials Processing Technology, 2009, pp. 482-487, ISSN 0924-0136
() Research published in the top international journal
L. Sidjanin, R. E. Smallman, J. M. Young: Electron Microstructure and Mechanical Properties of Silicon and Aluminium Ductile Irons, Acta Metallurgica and Materials, Vol. 42 No9 (1994) 3149-3156
() Research published in the top international journal
L. Sidjanin, R. E Smallman: Metallography of Bainitic Transformation in Austempered Ductile Iron, Materials Science and Technology, Vol.8 (1992) 1095-1103
() Research published in the top international journal
Šiđanin (Sidjanin) L., Kovač P.: Fracture mechanisms in chip formation processes, Materials Science and Technology, 1997, Vol. 13, pp. 439-444, ISSN 0267-0836
() Research published in the top international journal
O. Erić, D. Rajnović, S. Zec, L. Sidjanin T. Jovanović: Microstructure and fracture of alloyed austempered ductile iron, Materials Characterization, 57 (2006) 211-217
() Research published in the top international journal
Šiđanin (Sidjanin) L., Miyasato S.: Void Nucleation and growth in dual phase steel wire, Materials Science and Technology, 1989, Vol. 5, No 12, pp. 1200-1206, ISSN 0267-0836
() Research published in the top international journal
P. Kovač, L. Sidjanin: Investigation of Chip Formation During Milling, International Journal of Production Economics, 51 (1997) 149 –153
() Research published in the top international journal
L. Sidjanin, R.E. Smallman, S. M. Boutorabi: Electron Microstructure and Fracture of Aluminum Austempered Ductile Iron, Materials Science and Tecnology, Vol.X (1994) 711-720
() Research published in the top international journal
Šiđanin (Sidjanin) L., Rajnović D., Erić O., Smallman R.: Austempering study of unalloyed and alloyed ductile irons, Materials Science and Technology, 2010, Vol. 26, No 5, pp. 567-571, ISSN 0267-0836
() Research published in the prominent international journal
L. Sidanin(Šiđanin), S. Milicev and N. Matovic: Fatigue failure of ductile iron crankshafts, Cast Metals, Vol.4. 1 (1991) 50-54, reprinted in International Journal of Fatigue, 14 (3), (1992) 204-208
() Research published in the prominent international journal
Rajnović D., Eric O., Šiđanin (Sidjanin) L.: The standard processing window of alloyed ADI materials, Kovove Materialy = Metallic Materials, 2012, Vol. 50, No 3, pp. 199-208, ISSN 0023-432X
() Research published in the prominent international journal
Kovač P., Šiđanin (Sidjanin) L., Rajnović D., Savković B., Wannasin J.: The microstructure influence on the chip formation process of Al-Cu alloy cast conventionally and in semi solid state, Metalurgija, 2012, Vol. 51, No 1, pp. 34-38, ISSN 0543-5846, UDK: 669.715:621.96.621.773:620.18=111
() Research published in the prominent international journal
Šiljegović M., Lukić-Petrović S., Skuban F., Avramov M., Šiđanin (Sidjanin) L.: Thermomechanical characteristics of arsenic-sulphide glasses doped with bismuth, Materials and Manufacturing Processes, 2013, Vol. 28, pp. 96-100, ISSN 1532-2475
() Research published in the international journal
Alexandrov S., Vilotić D., Lyamina E., Šiđanin (Sidjanin) L.: Thickness of the layer of intense plastic deformation in the vicinity of the friction surface during upsetting of a cylinder with flat dies, Journal of Applied Mechanics and Technical Physics, 2011, Vol. 52, No 3, pp. 491-495, ISSN 0021-8944
() Research published in the international journal
Rajnović D., Baloš S., Šiđanin (Sidjanin) L., Radeka M., Vučetić (Petrović) S., Zorić D., Ranogajec J.: The influence of polymer addition on flexural strength, fracture mode and porosity of traditional ceramics, Chemical Industry & Chemical Engineering Quarterly / CI&CEQ, 2011, Vol. 17, No 2, pp. 223-230, ISSN 1451-9372
() Research published in the international journal
Baloš S., Šiđanin (Sidjanin) L.: Effect of tunneling defects on the joint strength efficiency, Materiali in Tehnologije, 2014, Vol. 48, No 4, pp. 491-496, ISSN 1580-2949
() Research published in the international journal
Rajnović D., Baloš S., Šiđanin (Sidjanin) L., Radeka M., Vučetić (Petrović) S., Zorić D., Ranogajec J.: The influence of polymer addition on flexural strength, fracture mode and porosity of traditional ceramics, Chemical Industry & Chemical Engineering Quarterly / CI&CEQ, 2011, Vol. 17, No 2, pp. 223-230, ISSN 1451-9372
() Research published in the international journal
Baloš S., Balos T., Šiđanin (Sidjanin) L., Marković D., Pilić B., Pavličević J.: Study of PMMA biopolymer properties treated by microwave energy, Materiale Plastice, 2011, Vol. 48, No 02, pp. 127-131, ISSN 0025-5289
() Research published in the prominent international journal
M. Skunca, P. Skakun, Z. Keran, L. Sidjanin, M.D. Math: Relations between numerical simulation and experiment in closed die forging of a gear, Journal of Materials Processing Technology, Vol. 177, Iss. 1-3, (2006), 256-260
() Research published in the prominent international journal
O. Erić, L. Sidjanin, Z. Misković, S. Zec, M.T. Jovanović: Microstructure and Toughness of CuNiMo austempered ductile iron, Materials Letters, 58 (2004) 2707 - 2711
