() Researches published in the journals of the international importance
Gračanin D., Lalić B., Beker I., Lalić D., Buchmeister B.: Cost-Time Profile Simulation in Job Shop Scheduling Optimization, International Journal of Simulation Modelling, 2013, Vol. 12, No 4, pp. 213-224, ISSN 1726-4529
() Research published in the prominent international journal
Brkljač N., Šević D., Beker I., Kesić I., Milisavljević S.: Procedure for treatment of hazardous waste by MID-MIX procedure in Serbia, International Journal of the Physical Sciences, 2012, Vol. 7, No 18, pp. 2639-2646, ISSN 1992-1950
() Research published in the prominent international journal
Jocanović M., Šević D., Karanović V., Beker I., Dudić S.: Increased Efficiency of Hydraulic Systems Trough Reliability Theory and Monitoring of System Operating Parameters, Strojniski vestnik - Journal of Mechanical Engineering, 2012, Vol. 58, No 4, pp. 281-288, ISSN 0039-2480
() Research published in the international journal
Beker I., Kesić I., Radlovački V., Delić M., Šević D., Morača S.: Improvement of the Maintenance Management of Complex Technical Systems Which Demand High Reliability, Tehnicki vjesnik - Technical Gazette, 2017, Vol. 24, No 5, pp. 1543-1550, ISSN 1330-3651, UDK: 163.42
() Research published in the international journal
Radlovački V., Pečujlija M., Kamberović B., Jovanović R., Delić M., Beker I.: SATISFACTION OF HIGH SCHOOL STUDENTS WITH THE APPLICABILITY OF THEIR KNOWLEDGE, TTEM. Tehnics tehnologies education management, 2012, Vol. 7, No 2, pp. 777-785, ISSN 1840-1503
() Research published in the international journal
Radlovački V., Beker I., Majstorović V., Pečujlija M., Stanivuković D., Kamberović B.: Quality Managers' Estimates of Quality Management Principles Application in Certified Organisations in Transitional Conditions - Is Serbia Close to TQM, Strojniški vestnik - Journal of Mechanical Engineering, 2011, Vol. 57, No 11, pp. 851-861, ISSN 0039-2480
() Invited lectures from the international meeting printed in its entirety
Beker I., Radlovački V., Gračanin D.: State of the Implementation of the Lean in Serbia, 2. International Scientific Conference on Lean Technologies (LeanTech), Beograd: Fakulet organizacionih nauka, Beograd, 5-6 Septembar, 2013, pp. 1-8, ISBN 978-86-7680-283-8, UDK: 005.591.1 (082) 658.51 (082) 055.6 (082)
() Report from the international meeting printed in its entirety
Vulanović S., Delić M., Kamberović B., Beker I., Čerepnalkovska S.: INFLUENCE OF INTEGRATED MANAGEMENT SYSTEM ON RISK MANAGEMENT SYSTEM, 14. International Convention on Quality - ICQ, Beograd: UASQ-United Association of Serbia for Quality, Belgrade, Serbia., 5-7 Jun, 2017, pp. 63-66, ISBN 978-86-89157-09-3, UDK: 005;006.8
() Report from the international meeting printed in its entirety
Brkljač N., Milisavljević S., Delić M., Beker I., Šević D.: Reverse logistics implementation barriers in organizations on the territory of AP Vojvodina, 17. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department of Industrial Engineering and Engineering Management, 4-6 Oktobar, 2017, pp. 292-297, ISBN 978-86-7892-978-6
() Report from the international meeting printed in its entirety
Stanivuković D., Kamberović B., Beker I., Šević D.: TENDENCIJE RAZVOJA KVALITETA, POUZDANOSTI, ODRŽAVANjA I LOGISTIKE Naziv skupa: XII međunarodna konferencija IS 2002, Vrnjačka Banja, 2002. , 12. International Scientific Conference on Industrial Systems - IS, Vrnjačka Banja: Institut za industrijske sisteme, FTN, Novi Sad, 22-23 Novembar, 2002, pp. 75-89
() Report from the international meeting printed in its entirety
Stanivuković D., Beker I., Šević D.: Trends in development of logistics and logistics management - an overview , Industrijski sistemi, 2005, pp. 527-539, UDK: 658.5
() Report from the international meeting printed in its entirety
I. Beker, D. Stanivuković: BASICS OF IIM – ITC APPROACH TO LOGISTICS DESIGN AND MANAGEMENT, 13th Scientific Conference on INDUSTRIAL SYSTEMS, Septembar 07 – 09, 2005, Vrnjacka Banja, Srbija i Crna Gora
() Report from the international meeting printed in its entirety
Vulanović S., Beker I., Radlovački V.: Selection, Adjustment and Appliance of FMEA Method in Risk Assessment Process of Integrated Management System, 15. International Scientific Conference on Industrial Systems - IS, Novi Sad: Faculty of technical sciences, Department of industrial engineering and management, 14-16 Septembar, 2011, pp. 320-324, ISBN 978-86-7892-341-8
() Report from the international meeting printed in its entirety
Beker I., Jevtić V., Dobrilović D.: Using Shortest-Path Algorithms for Forklift Route Planning and Optimization, 15. International Scientific Conference on Industrial Systems - IS, Novi Sad: Fakultet tehnickin nauka, Novi Sad, 14-16 Septembar, 2011, pp. 285-290, ISBN 978-86-7892-341-8, UDK: 658.5 (082)
() Research published in the scientific journal
Morača S., Beker I.: Autori: Morača S., Beker, I., Katić J. Naziv: Upravljanje rizikom - potreba za novim standardom Naziv časopisa: Total quality management
() Research published in the scientific journal
Vulanović S., Beker I., Radlovački V., Delić M.: The Appliance of Work Flow Diagram as a Tool for Identification and Grouping of Failures in Processes of Integrated Management System, INTERNATIONAL JOURNAL ADVANCED QUALITY, 2012, Vol. 40, No 1, pp. 23-26, ISSN 2217-8155, UDK: 658.5
() Basic textbook for the course
Pouzdanost tehničkih sistema, autori prof. dr Gradimir Ivanović, prof. dr Dragutin Stanivuković, prof. dr Ivan Beker; Univerzitet u Novom Sadu, Fakultet tehničkih nauka, Novi Sad, 2010, ISBN 978-86-7892-247-3
() Basic textbook for the course
Beker I., Morača S., Tešić Z., Šević D., Rikalović A., Radlovački V.: LEAN SISTEM, Novi Sad, Univerzitet u Novom Sadu, Fakultet tehničkih nauka, 2017, ISBN 978-86-7892-856-7
