prof. dr Jelena Kiurski


Nedostaje slika

dr Jelena Kiurski

Redovni profesor


Telefon021/485-2623
E-mail
Akademsko zvanjeRedovni profesor
KancelarijaKabinet 410

Na Tehnološki fakultet u Novom Sadu upisana 1969. i diplomirala 1974. na odseku prehrambenog inženjerstva, smer konzervne hrane. Magistrirala 1981., a doktorirala 1997. godine takodje na Tehnološkom fakultetu u Novom Sadu. Zaposlila se 1976. na mestu višeg laboranta na predmetu Fizika na Tehnološkom fakultetu u Novom Sadu. Godine 1977. prešla je integracionim procesima na Univerzitetu u Institut za fiziku Prirodno-matematičkog fakulteta u Novom Sadu, gde je radila od 1977-1987. kao tehnički saradnik, 1987-1997. kao saradnik, 1997-2001. kao stručni saradnik u Laboratoriji za atomsku i izotopsku molekulsku spektroskopiju. Godine 1998. stekla je zvanje naučnog saradnika za naučnu disciplinu Hemijska tehnologija, na Tehnološkom fakultetu u Novom Sadu. Od 2001. godine zaposlena je na mestu docenta na Fakultetu tehničkih nauka, od 2006. u zvanju vanrednog profesora, a od 2011. u zvanju redovnog profesora, Odsek Grafičko inženjerstvo i dizajn. U svom profesionalnom i istraživačkom radu bavila se istraživanjima iz oblasti primene spektrohemijskih metoda u različitim oblastima tehnologije, a u poslednjim godinama i intenzivno istraživanjima u oblasti heterogne katalize, posebno u oblasti prerade nafte, ispitivanja kvaliteta keramičkih materijala i ekoloških istraživanja u grafičkoj industriji. Od 2001. do 2010. godina izdala je šest univerzitetskih udžbenika  i jednu monografiju (Fizičko-hemijske osnove izrade štamparskih formi, 2004. godine, Hemija u grafičkom inženjerstvu-praktikum, 2005.godine, Hemigrafija-praktikum, 2006.godine i Hemija u grafičkom inženjerstvu, 2009. godine, Grafičko okruženje - praktikum 2010 i Hemigrafija 2011., monografija 2010.) u izdanju Fakulteta tehničkih nauka u Novom Sadu u Ediciji tehničke nauke - udžbenici. Govori, čita i piše engleski. Član je Srpskog hemijskog društva, Društva fizikohemičara Srbije, Srpskog društva za elektronsku mikroskpopiju, YUNG - Jugoslovensko udruđenje za naftu i gas, SETAC (Society of Environemntal Toxicology and Chemistry Europe)

Trenutno nema podataka o članstvu zaposlenog!
Radno mestoOdDoOrganizaciona jedinica
Vanredni profesor22.09.2006.01.06.2011.Departman za grafičko inženjerstvo i dizajn
Docent01.12.2001.01.09.2006.Departman za grafičko inženjerstvo i dizajn
Redovni profesor14.07.2011.01.09.2016.Katedra za grafičko inženjerstvo i dizajn
NazivU Ustanovi
Odvajanje aromati;nih nitro-jedinjenja hromatografijom na tankom sloju skroba

Diploma

Hemijske nauke

Tehnološki fakultet

1974

Spektrofotometrijsko ispitivanje reagenasa derivata a-benzilmonoksima i njihovih reakcija sa nekim prelaznim elementima

Magistratura

Fizičko-hemijske nauke

Tehnološki fakultet

1981

Mehanizam starenja katalizatora za hidrodesulfirizaciju

Doktorat

Fizičko-hemijske nauke

Tehnološki fakultet

1997

Kriterijum produkcijeOpis
(M13) Monografska studija/poglavlje u knjizi M11 ili rad u tematskom zborniku vodećeg međunarodnog značajaKiurski J., Oros I., Kecić V.: Print and Related Industry Air Quality, Chapter 23 in in Comprehensive Analytical Chemistry Vol. 73 TheQuality of Air, Amsterdam, Elsevier, 2016, str. 623-654, ISBN 978-0-444-6360
(M14) Monografska studija/poglavlje u knjizi M12 ili rad u tematskom zborniku međunarodnog značajaRadeka M., Kiurski J., Markov S., Marinković-Nedučin R., Ranogajec J.: Microbial deterioration of clay roofing tiles, Southampton, WIT Press, 2007, str. 567-575, ISBN 978-1-84564-085-9
(M14) Monografska studija/poglavlje u knjizi M12 ili rad u tematskom zborniku međunarodnog značajaMarinković-Nedučin R., Kiurski J., Kiš (Kiss) E., Mičić R.: The Effect of Atmosphere on HDS Catalysts Sintering, New York, Plenum Publishers, , 1999, str. 347-355, ISBN 0306461803
(M14) Monografska studija/poglavlje u knjizi M12 ili rad u tematskom zborniku međunarodnog značajaMarinković-Nedučin R., Kiš (Kiss) E., Đurić M., Bošković G., Kiurski J., Mičić R.: Deactivation of HDS catalysts, New York, Elsevier, 1998, str. 399-404, ISBN 9780444829207
(M21) Rad u vrhunskom međunarodnom časopisuKiurski J., Oros I., Ralević N., Stefanov J.: Statistical Methods as Indicator of Offset Printing Wastewater Quality, Stochastic Environmental Research and Risk Assessment, 2015, Vol. 29, No 6, pp. 1709-1720, ISSN 1436-3240, UDK: DOI: 10.1007/s00477-014-1013-1
(M21) Rad u vrhunskom međunarodnom časopisuKiurski J., Marić B., Aksentijevic S., Oros I., Kecić V., Kovačević I.: Indoor air quality investigation from screen printing industry, Renewable and Sustainable Energy Reviews, 2013, Vol. 28, pp. 224-231, ISSN 1364-0321, UDK: DOI: 10.1016/j.rser.2013.07.039
(M21) Rad u vrhunskom međunarodnom časopisuKiurski J., Marić B., Adamović D., Mihailović A., Grujić S., Oros I., Krstić J.: Register of hazardous materials in printing industry as a tool for sustainable development management, Renewable and Sustainable Energy Reviews, 2012, Vol. 16, No 1, pp. 660-667, ISSN 1364-0321, UDK: doi:10.1016/j.rser.2011.08.030
(M21) Rad u vrhunskom međunarodnom časopisuKiurski J., Ranogajec J., Vučetić (Petrović) S., Zorić D., Adamović (Majkić) S., Oros I., Krstić J.: Fired clay with polymer addition as printing developer purifier, Applied Clay Science, 2012, Vol. 65, No 65/66, pp. 48-52, ISSN 0169-1317
(M21) Rad u vrhunskom međunarodnom časopisuRanogajec J., Markov S., Kiurski J., Radeka M., Ducman V.: Microbial Deterioration of Clay Roofing Tiles as a Function of the Firing temperature , Journal of the American Ceramic Society, 2008, Vol. 91, No 11, pp. 3762-3767, ISSN 0002-7820
(M21) Rad u vrhunskom međunarodnom časopisuRadeka M., Ranogajec J., Kiurski J., Markov S., Marinković-Nedučin R.: Influence of lichen biocorrosion on the quality of ceramic roofing tiles , Journal of the European Ceramic Society, 2007, Vol. 27, No 2-3, pp. 1763-1766, ISSN 0955-2219
(M21) Rad u vrhunskom međunarodnom časopisuJanjić J., Čonkić Lj., Kiurski J., Benak J.: A Method for Arsenic Level Determination an a Device for Arsenic Elimination from Drinking Water , Water Research, 1997, Vol. 31, No 3, pp. 419-428, ISSN 0043-1354
(M21) Rad u vrhunskom međunarodnom časopisuJanjić J., Kiurski J.: Nonflame Atomic Fluorescence as a Method for Mercury Traces Determination , Water Research, 1994, Vol. 28, No 1, pp. 233-235, ISSN 0043-1354
(M21) Rad u vrhunskom međunarodnom časopisuJ.Janjić, J.Kiurski, "Nonflame Atomic Fluorescence as a Method for Mercury Traces Determination", Water Research, 28(1), 233-235 (1994)
(M21) Rad u vrhunskom međunarodnom časopisuJ.Janjić, Lj.Čonkić, J.Kiurski, J.Benak, "A Method for Arsenic Level Determination an a Device for Arsenic Elimination from Drinking Water", Water Research, 31(3), 419-428 (1997)
(M21) Rad u vrhunskom međunarodnom časopisuJ. Kiurski, J. Ranogajec, S. Vucetic, D. Zoric, S. Adamovic, I. Oros, J. Krstic, Fired clay with polymer addition as printing developer purifier, Applied Clay Science 65–66 (2012) 48–52
(M21) Rad u vrhunskom međunarodnom časopisuKiurski Jelena S, Maric Branislav, Adamovic Dragan, Mihailovic Aleksandra, Grujic Selena D, Oros Ivana, Krstic Jelena, Register of hazardous materials in printing industry as a tool for sustainable development management, RENEWABLE & SUSTAINABLE ENERGY REVIEWS, (2012), vol. 16 br. 1, str. 660-667
(M21) Rad u vrhunskom međunarodnom časopisuKiurski J., Oros I., Kecić V., Kovačević I., Aksentijević S.: The temporal variation of indoor pollutants in photocopying shop, Stochastic Environmental Research and Risk Assessment, 2016, Vol. 30, pp. 1289-1300, ISSN 1436-3240, UDK: DOI 10.1007/s00477-015-1107-4
(M22) Rad u istaknutom međunarodnom časopisuKiurski Jelena S, Obadovic Dusanka Z, Marinkovic-Neducin Radmila P, Cvetinov Miroslav J, The influence of Ni(II) ion on the properties of NiO-Al2O3 catalyst prepared by impregnation method,SURFACE AND INTERFACE ANALYSIS, (2011), vol. 43 br. 6, str. 971-975
(M22) Rad u istaknutom međunarodnom časopisuKiurski J., Marić B., Aksentijević S., Oros I., Kecić V.: Occupational hazards in printing industry, International Journal of Environmental Science and Technology, 2016, Vol. 13, No 3, pp. 955-972, ISSN 1735-1472, UDK: DOI 10.1007/s13762-016-0937-z
(M22) Rad u istaknutom međunarodnom časopisuVučinić-Vasić M., Kiurski J., Aksenitijević S., Kozmidis-Luburić U.: Metal concentration and particle size distribution of stream and river water from copper rolling mill industry, International Journal of Environmental Science and Technology, 2013, Vol. 10, No 5, pp. 923-930, ISSN 1735-1472, UDK: DOI 10.1007/s13762-013-0203-6
(M22) Rad u istaknutom međunarodnom časopisuKiurski J., Obadović D., Marinković-Nedučin R., Kiš (Kiss) E.: Spinel-Type Structure of Co in Conditions of HDS Catalysts Aging, Polyhedron, 1999, Vol. 18, No 5, pp. 741-747
(M22) Rad u istaknutom međunarodnom časopisuKiš (Kiss) E., Marinković-Nedučin R., Lomić G., Bošković G., Obadović D., Kiurski J., Putanov P.: Structural and Textural Properties of the NiO-Al2O3 Catalyst , Polyhedron, 1998, Vol. 17, No 1, pp. 27-34
(M22) Rad u istaknutom međunarodnom časopisuObadović D., Kiurski J., Marinković-Nedučin R.: Electronic States of Ni(II) in Spinel-Type Structure, Polyhedron, 1996, Vol. 15, No 20, pp. 3631-3634
(M23) Rad u međunarodnom časopisuKiurski J., Oros I., Ralević N., Kovačević I., Adamović (Majkić) S., Krstić J., Čomić L.: Cluster and principal component analysis in the assessment of fountain solution quality, Carpathian Journal of Earth and Environmental Sciences, 2013, Vol. 8, No 1, pp. 19-23, ISSN 1842-4090
(M23) Rad u međunarodnom časopisuKiurski J., Snežana A., Nedović Lj., Oros I., Čomić L.: The influence of printing microclimate parameters on isopropyl alcohol emission, Environmental Engineering and Management Journal, 2013, ISSN 1582-9596
(M23) Rad u međunarodnom časopisuKiurski J., Ranogajec J., Oros I., Zorić D.: Fired clay, an effective natural adsorbent for printing developer purifying, Fresenius Environmental Bulletin, 2013, Vol. 22, No 12c, pp. 3860-3864, ISSN 1018-4619
(M23) Rad u međunarodnom časopisuKiurski J., Adamović (Majkić) S., Oros I., Krstić J., Vojinović-Miloradov M.: The removal Efficiency of Heavy Metals from Spent Printing Developer, Carpathian Journal of Earth and Environmental Sciences, 2012, Vol. 7, No 1, pp. 5-16, ISSN 1842-4090
(M23) Rad u međunarodnom časopisuKiurski J., Adamović (Majkić) S., Oros I., Krstić J., Kovačević I.: Adsorption feasibility in the Cr(total) Ions Removal from Waste Printing Developer, Global Nest Journal, 2012, Vol. 14, No 1, pp. 18-23, ISSN 1790-7632
(M23) Rad u međunarodnom časopisuAksentijević S., Kiurski J., Vučinić-Vasić M.: Arsenic Distribution in Water/Sediment System of Sevojno, Environmental Monitoring and Assessment, 2012, Vol. 184, No 1, pp. 335-341, UDK: DOI: 10.1007/s10661-011-1971-4
(M23) Rad u međunarodnom časopisuMihailović A., Grujić S., Kiurski J., Krstić J., Oros I., Kovačević I.: Occupational noise in printing companies, Environmental Monitoring and Assesment, 2011, Vol. 181, No 1-4, pp. 111-122, ISSN 1573-2959 (online), UDK: DOI: 10.1007/s10661-010-1817-5
(M23) Rad u međunarodnom časopisuRadonić (Jakšić) J., Vojinović-Miloradov M., Turk Sekulić M., Kiurski J., Đogo M., Milovanović D.: The octanol-air partition coefficient, KOA, as a predictor of gas-particle partitioning of polycyclic aromatic hydrocarbons and polychlorinated biphenyls at industrial and urban sites, Journal of Serbian Chemical Society, 2011, Vol. 76, No 3, pp. 447-458, ISSN 0352-5139, UDK: doi: 10.2298/JSC100616037R
(M23) Rad u međunarodnom časopisuKiurski J., Obadović D., Marinković-Nedučin R., Cvetinov M.: The influence of Ni(II) ion on the properties of NiO- Al2O3 catalyst prepared by impregnation method, Surface and Interface Analysis, 2011, No 43, pp. 971-975, UDK: DOI: 10.1002/sia.3677
(M23) Rad u međunarodnom časopisuKiurski J., Vučinić-Vasić M., Aksentijević S., Kozmidis-Luburić U., Vojinović-Miloradov M.: Metal distribution and particle size analysis in water and sediment of the Djetinja river and Dragića spring (Serbia), Chemical Industry and Chemical Engineering Quarterly / CICEQ, 2010, Vol. 16, No 4, pp. 363-372, ISSN 1451-9372
(M23) Rad u međunarodnom časopisuMićić R., Marinković-Nedučin R., Schay Z., Nagy I., Kiurski J., Kiš (Kiss) E.: Influence of the activation temperature on structural and textural properties of NiMo/Al2O3 hydrodesulfurization catalysts , Reaction Kinetics and Catalysis Letters, 2007, Vol. 91, No 1, pp. 85-92
(M23) Rad u međunarodnom časopisuKiurski J., Ranogajec J., Marinković-Nedučin R., Markov S., Bačkalić Z.: Ageing processes of ceramic roofing tiles due to the lichens actions , Ceramika/Ceramics, 2006, Vol. 97, pp. 149-159, ISSN 0860-3340
(M23) Rad u međunarodnom časopisuKiurski J., Ranogajec J., Ujhelji A., Radeka M., Bokorov M., Balint J., Borbelj-Mesaroš A.: Biochemical Corrosion on ceramic roofing tiles by lichen actions , Interceram, 2005, Vol. 54, No 5, pp. 340-343
(M23) Rad u međunarodnom časopisuKiurski J., Obadović D., Kiš (Kiss) E., Marinković-Nedučin R.: Electronic states of Mn(II) in the kaolinite nanostructure , Reaction Kinetics and Catalysis Letters, 2005, Vol. 84, No 2, pp. 359-366
(M23) Rad u međunarodnom časopisuKiurski J., Ranogajec J., Ujhelji A., Radeka M., Bokorov M.: Evaluation of the effect of lichens on ceramic roofing tiles by scanning electron microscopy and energy-dispersive spectroscopy analyses , Scanning, 2005, Vol. 27, No 3, pp. 113-119
(M23) Rad u međunarodnom časopisuKiurski J., Obadović D., Marinković-Nedučin R.: Energies of electronic states of promoter ions in hydrodesulfurization catalysts, React.Kinet.Catal.Lett, 2004, Vol. 82, No 1, pp. 41-47, ISSN 0133-1736
(M23) Rad u međunarodnom časopisuMarinković-Nedučin R., Kiurski J., Kiš (Kiss) E., Mićić R.: The Effect of Atmosphere on HDS Catalysts Sintering, Advanced Science and Technology of Sintering, 1999, pp. 315-321
(M23) Rad u međunarodnom časopisuMarinković-Nedučin R., Kiurski J., Đurđević K., Mićić R.: Affect of the Presulfiding Temperature on HDS Catalyst Stability, Petroleum and Coal, 1999, Vol. 41, No 3-4, pp. 163-165, ISSN 1335-3055
(M23) Rad u međunarodnom časopisuMarinković-Nedučin R., Kiš (Kiss) E., Đurić M., Bošković G., Kiurski J., Mićić R.: Deactivation of HDS Catalysts, Studies in Surface Science and Catalysis, 1998, Vol. 113, pp. 399-404, ISSN 0167-2991
(M23) Rad u međunarodnom časopisuMarinković-Nedučin R., Kiš (Kiss) E., Đurić M., Kiurski J., Obadović D., Pavlović P., Mićić R.: Deactivation Studies on NiO-MoO3/-Al2O3 and CoO-MoO3/-Al2O3 Hydrodesulfurization Catalysts , Studies in Surface Science and Catalysis, 1997, Vol. 106, pp. 307-310, ISSN 0167-2991
(M23) Rad u međunarodnom časopisuKiurski J., Obadović D., Marinković-Nedučin R.: Electronic States of Co(II) in Spinel Type Structure , Proc.Suppl. of Balkan Physics Letters, 1997, No 5, pp. 506-509
(M23) Rad u međunarodnom časopisuJanjić J., Kiurski J.: Non-flame Atomic Fluorescence Determination of Mercury in Foodstuffs , Journal of Food Physics (Supplement), 1996, pp. 137-138
(M23) Rad u međunarodnom časopisuMarinković-Nedučin R., Kiš (Kiss) E., Kiurski J., Mićić R.: Deactivation Studies on Industrial NiO(CoO)-MoO3/-Al2O3 Hydrotreating Catalysts , Petroleum and Coal, 1996, Vol. 38, No 4, pp. 30-32, ISSN 1335-3055
(M23) Rad u međunarodnom časopisuKiurski Jelena S, Vucinic-Vasic Milica T, Aksentijevic Snezana, Kozmidis-Luburic Uranija, Vojinovic-Miloradov Mirjana B, Metals Distribution and Particle Size Analysis in Water and Sediment of the Djetinja River and Dragica Spring (Serbia), CHEMICAL INDUSTRY & CHEMICAL ENGINEERING QUARTERLY, (2010), vol. 16 br. 4, str. 363-372
(M23) Rad u međunarodnom časopisuKiurski Jelena S, Adamovic Savka, Oros Ivana, Krstic Jelena, Kovacevic Ilija, Adsorption Feasibility in the Cr(Total) Ions Removal From Waste Printing Developer, GLOBAL NEST JOURNAL, (2012), vol. 14 br. 1, str. 18-23
(M23) Rad u međunarodnom časopisuKiurski Jelena S, Adamovic Savka, Oros Ivana, Krstic Jelena, Vojinovic-Miloradov Mirjana B, The Removal Efficiency of Heavy Metals From Spent Printing Developer, CARPATHIAN JOURNAL OF EARTH AND ENVIRONMENTAL SCIENCES, (2012), vol. 7 br. 1, str. 5-16
(M23) Rad u međunarodnom časopisuMihailovic Aleksandra, Grujic Selena D, Kiurski Jelena S, Krstic Jelena, Oros Ivana, Kovacevic Ilija, Occupational noise in printing companies, ENVIRONMENTAL MONITORING AND ASSESSMENT, (2011), vol. 181 br. 1-4, str. 111-122
(M23) Rad u međunarodnom časopisuRadonic Jelena R, Vojinovic-Miloradov Mirjana B, Turk-Sekulic Maja M, Kiurski Jelena S, Djogo Maja, Milovanovic Dusan B, The octanol-air partition coefficient, K-OA as a predictor of gas-particle partitioning of polycyclic aromatic hydrocarbons and polychlorinated biphenyls at industrial and urban sites, JOURNAL OF THE SERBIAN CHEMICAL SOCIETY, (2011), vol. 76 br. 3, str. 447-458
(M24) Rad u časopisu međunarodnog značaja verifikovanog posebnom odlukomAksentijević S., Kiurski J., Aćimović-Pavlović Z.: Olovo u otpadnim vodama metalopreradjivačke industrije Zapadne Srbije, Zaštita materijala, 2013, Vol. 54, No 2, pp. 175-178, ISSN 0351-9465, UDK: 628.358.043.045
(M31) Predavanje po pozivu sa međunarodnog skupa štampano u celiniKiurski J., Aksentijević S., Oros I., Kecić V.: Indoor air emissions from photocopying, 7. 7th International Scientific Conference "Science and Higher Education in Function of Sustainable Development - SED 2014, Užice: VPTŠ Užice, 3-4 Oktobar, 2014, pp. 16-22, ISBN 978-86-83573-42-4
(M32) Predavanje po pozivu sa međunarodnog skupa štampano u izvoduKiurski J., Vojinović-Miloradov M., Vidicki B., Krstić J., Oros I., Đogo M., Milovanović D.: Wastewater treatment in printing facilities, 7. The 7th IMT-GT UNINET and The 3rd Joint International PSU-UNS Conferences (BioScience for the future 2010), Hat-Yai: Prince of Songkla University, Thailand, 7-8 Oktobar, 2010, pp. 289-289
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKiurski J., Ranogajec J., Kecić V., Oros I.: Unfired Clayey Pellets as the Adsorbents for Metal Ions Removal from a Waste Printing Developer, 21. Symposium on Analytical and Environmental Problems, Szeged: SZAB, Szeged, Hungary, 28 Septembar, 2015, pp. 205-208, ISBN 978-963-306-411-5
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKiurski J., Oros I., Kecić V., Aksentijevic S.: Statistical Interpretation of Carbon Dioxide Emission in the Photocopying Process, 21. Symposium on Analytical and Environmental Problems, Szeged: SZAB, Szeged, Hungary, 28 Septembar, 2015, pp. 209-212, ISBN 978-963-306-411-5
(M33) Saopštenje sa međunarodnog skupa štampano u celiniAksentijevic S., Kiurski J., Kecić V., Oros I.: Cadmium in Industrial Wastewater, 21. Symposium on Analytical and Environmental Problems, Szeged: SZAB, Szeged, Hungary, 28 Septembar, 2015, pp. 213-216, ISBN 978-963-306-411-5
(M33) Saopštenje sa međunarodnog skupa štampano u celiniAnđelić G., Đaković V., Ralević N., Kiurski J.: Efficient Management in Environmental Protection, 21. Symposium on Analytical and Environmental Problems, Szeged: SZAB, Szeged, Hungary, 28 Septembar, 2015, pp. 217-220, ISBN 978-963-306-411-5
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKiurski J., Aksentijevic S., Oros I., Kecić V.: Application of two-way Anova on carbon monoxide emission during photocopying process, 8. International Conference "Science and higher education in function of sustainable developement", Užice: VPTŠ, Užice, 2-3 Oktobar, 2015, pp. 1-6
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKiurski J., Ranogajec J., Vučinić-Vasić M., Kecić V., Oros I.: The efficiency of clayey pellets for Zn(II) ions removal from a waste printing developer, 12. 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry, Physical Chemistry 2014, Beograd: Society of Physical Chemists of Serbia, 22-26 Septembar, 2014, pp. 889-892, ISBN 978-86-82475-30-9
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKiurski J., Aksentijević S., Oros I., Kecić V.: Mutual influence of the indoor pollutants during photocopying process, 12. 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry, Physical Chemistry 2014, Beograd: Society of Physical Chemists of Serbia, 22-26 Septembar, 2014, pp. 893-896, ISBN 978-86-82475-30-9
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKiurski J., Aksentijević S., Oros I., Kecić V.: The influence of microclimates parameter on perchlorethylen during photocopying process, 20. 20th International Symposium on Analytical and Environmental Problems, Szeged: SZAB, Szeged, Hungary , 22 Septembar, 2014, pp. 47-50, ISBN 978-963-12-1161-0
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKiurski J., Ranogajec J., Kecić V., Oros I.: The feasibility of clayey adsorpbent for copper ion removal from waste printing developer, 20. 20th International Symposium on Analytical and Environmental Problems, Szeged: SZAB, Szeged, Hungary , 22 Septembar, 2014, pp. 43-46
(M33) Saopštenje sa međunarodnog skupa štampano u celiniĐaković V., Kiurski J., Anđelić G., Kecić V.: Modern Management Trends in Printing Industry - Environmental Challenges: A Case Study in Republic of Serbia, 20. 20th International Symposium on Analytical and Environmental Problems, Szeged: SZAB, Szeged, Hungary , 22 Septembar, 2014, pp. 51-54, ISBN 978-963-12-1161-0
(M33) Saopštenje sa međunarodnog skupa štampano u celiniRalević N., Glišović N., Đaković V., Anđelić G., Kiurski J.: The neural networks backpropagation algorithm in investment analysis, 20. 20th International Symposium on Analytical and Environmental Problems, Szeged: SZAB, Szeged, Hungary , 22 Septembar, 2014, pp. 55-58, ISBN 978-963-12-1161-0
(M33) Saopštenje sa međunarodnog skupa štampano u celiniĐaković V., Ralević N., Kiurski J., Anđelić G., Glišović N.: An empirical evidence of investment return prediction: the case of the Republic of Serbia, 16. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: University of Novi Sad - Faculty of Technical Sciences, Department of Industrial Engineering and Management, 15-17 Oktobar, 2014, pp. 233-236, ISBN 978-86-7892-652-5
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKiurski J., Ranogajec J., Kecić V., Rudić O., Oros I.: Adsorption capacity of clayey pellets as the function of the particle size distribution, 1. International Conference on Engineering and Applied Sciences Optimization, Kos: National Technical University of Athens (NTUA), Greece, 4-6 Jun, 2014, pp. 2907-2917, ISBN 978-960-99994-6
(M33) Saopštenje sa međunarodnog skupa štampano u celiniĐaković V., Anđelić G., Kiurski J., Oros I., Kecić V.: Assesment Methods for Investment Projects in the Graphic Industry Sector: A Case Study of the Republic of Serbia, 6. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 15-17 Maj, 2013, pp. 1-4, ISBN 978-86-7892-510-8
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKecić V., Aksentijevic S., Oros I., Kiurski J.: Indoor emission of prepress procesess, 15. Danube-Kris-Mures-Tisa (DKMT) Euroregion Conference on Environment and Health, Novi Sad: University of Novi Sad, Faculty of Technology, 16-17 Maj, 2013, pp. 181-186, ISBN 978-86-6253-019-6
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKiurski J., Oros I., Kecić V., Vojinović-Miloradov M.: Identification of the main volatile hazards in pad press environments, 19. International Conference "Engineering for Environment Protection" – TOP, Časta-Papiernička: Slovak University of Technology in Bratislava, 11-13 Jun, 2013, pp. 133-137, ISBN 978-80227-3955-9
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKiurski J., Marić B., Ranogajec J., Oros I., Kecić V.: The economic viability of clay in the adsorption separation of metal ions from waste printing developer, 21. The twentyfirst Annual International Conference on COMPOSITES/NANO ENGINEERING (ICCE - 21), Tenerife: International Community for Composties or Nano Engineering and University of La Laguna, Tenerife, Spain, 21-27 Jul, 2013, pp. 417-418
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKiurski J., Kecić V., Oros I., Aksentijević S., Ralević N.: Indoor air quality in photocopying facility with statistical analysis, 19. International Symposium on Analytical and Environmental Problems, Szeged: SZAB, Szeged, Hungary , 23 Septembar, 2013, pp. 161-164, ISBN 978-963-315-141-9
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKiurski J., Oros I., Kecić V., Đaković V., Anđelić G.: The influence of water hardness on fountain solution quality, 19. International Symposium on Analytical and Environmental Problems, Szeged: SZAB, Szeged, Hungary , 23 Septembar, 2013, pp. 165-168, ISBN 978-963-315-141-9
(M33) Saopštenje sa međunarodnog skupa štampano u celiniRalević N., Glišović N., Kiurski J., Anđelić G., Đaković V.: Prediction Risk Estimation of the Neural Networks Application on the Belgrade Stock Exchange, 19. International Symposium on Analytical and Environmental Problems, Szeged: SZAB, Szeged, Hungary , 23 Septembar, 2013, pp. 249-252, ISBN 978-963-315-141-9
(M33) Saopštenje sa međunarodnog skupa štampano u celiniRalević N., Glišović N., Kiurski J., Đaković V., Anđelić G.: Application of Neural Networks in Investments: A Case of BELEX15 Stock Index, 11. SISY - International Symposium on Intelligent systems and Informatics, Subotica: Obuda University, Budapest, Hungary; Subotica Tech, Serbia; University of Novi Sad; Subotica: Visoka tehnička škola strukovnih studija, Serbia, 26-28 Septembar, 2013, pp. 171-175, ISBN 978-1-4799-0304-7
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKiurski J., Oros I., Adamović (Majkić) S., Čomić L.: The composition of sheet-fed offset printing inks, 12. Eco-Ist’12, Zaječar: University of Belgrade, Technical Faculty in Bor, 30-2 Maj, 2012, pp. 200-205, ISBN 978-86-80987-98-9
(M33) Saopštenje sa međunarodnog skupa štampano u celiniAdamović D., Kiurski J., Adamović (Majkić) S., Oros I., Krstić J., Kovačević I.: Waste management Assessment in Screen Printing, 18. International Conference "Engineering for Environment Protection" – TOP, Bratislava: Slovak University of Technology in Bratislava, faculty of Mechanical Engineering, 26-28 Jun, 2012, pp. 7-12, ISBN 978-80-227-3723-4
(M33) Saopštenje sa međunarodnog skupa štampano u celiniRalević N., Đaković V., Kiurski J., Anđelić G.: Fuzzy Uncertainty Analysis in the Investment Processes, 10. SISY - International Symposium on Intelligent systems and Informatics, Subotica: Obuda University, Budapest, Hungary; Subotica Tech, Serbia; University of Novi Sad, Serbia, 20-22 Septembar, 2012, pp. 361-365, ISBN 978-1-4673-4751-8
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKiurski J., Obadović D., Krstić J., Oros I., Cvetinov M.: Absorption Characteristics of Yellow Sheet-fed offset printing Ink, 18. International Symposium on Analytical and Environmental Problems, with Special Emphasis on Heavy Metal Ions as Contaminants, Segedin: SZAB , 24 Septembar, 2012, pp. 122-125, ISBN 978-963-306-165-7
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKiurski J., Obadović D., Cvetinov M., Krstić J., Oros I.: Absorption Characteristics of Cyan Dyes, 11. International Conference on Fundamental and Applied Aspects of Physical Chemistry, Beograd: Society of Physical Chemists of Serbia, 24-28 Septembar, 2012, pp. 606-608, ISBN 978-86-82475-28-6
(M33) Saopštenje sa međunarodnog skupa štampano u celiniVojinović-Miloradov M., Adamović D., Radonić (Jakšić) J., Turk Sekulić M., Kiurski J., Milovanović D., Gobor Z.: Advanced wastewater treatment technologies, 18. International Symposium on Analytical and Environmental Problems, Szeged: SZAB Kémiai Szakbizottság Analitikai, 24 Septembar, 2012, pp. 277-280
(M42) Monografija nacionalnog značaja, monografsko izdanje građe,Jelena Kiurski, Registar polutanata grafičke industrije Novog Sada, Edicija "Tehničke nauke - Monografije": br.41, Fakultet tehničkih nauka,Novi Sad, 2010, ISBN 978-86-7892-314-2, a) Grafička industrija - Hemijsko zagadjivanje
(U01) Osnovni udžbenik za nastavni predmetJelena Kiurski: Hemigrafija, Edicija "Tehničke nauke - Udžbenici": br.309, Fakultet tehničkih nauka, Novi Sad, 2011,ISBN 978-86-7892-359-3, a) Hemigrafija
(U02) Pomoćni udžbenik za nastavni predmetJelena Kiurski, Savka Adamović, Grafičko okruženje - praktikum, Edicija "Tehničke nauke - Udžbenici": br.283, Fakultet tehničkih nauka, Novi Sad, 2010,ISBN 978-86-7892-310-4, a) Grafička industrija - Hemijsko zagadjivanje - Praktikum
(U02) Pomoćni udžbenik za nastavni predmetJelena Kiurski, Hemija u grafičkom inženjerstvu - praktikum za vežbe, Edicija "Tehničke nauke - udžbenici": br. 407, Fakultet tehničkih nauka; Novi Sad, 2013., ISBN 978-86'7892-526-9, a) Hemija u grafičkom inženjerstvu - praktikum
(U02) Pomoćni udžbenik za nastavni predmetPraktikum za laboratorijske vezbe iz grafickog okruzenja, Edicija @Tehnicke nauke - udzbenici, br. 2015
(U01) Osnovni udžbenik za nastavni predmetJelena Kiurski, Fizičko-hemijske osnove izrade štamparskih formi, Edicija "Tehničke nauke - Udžbenici": br.87, Fakultet tehničkih nauka, Novi Sad, 2004., ISBN 86-85211-3-04, a)Hemigrafija
(U01) Osnovni udžbenik za nastavni predmetJelena Kiurski, Hemija u grafičkom inženjerstvu, Edicija "Tehničke nauke - Udžbenici": br.227, Fakultet tehničkih nauka,Novi Sad, 2009,ISBN 978-86-7892-201-5, a) Hemija
(U02) Pomoćni udžbenik za nastavni predmetJelena Kiurski, Hemigrafija - praktikum, Edicija "Tehničke nauke - Udžbenici": br.152, Fakultet tehničkih nauka, Novi Sad, 2006., ISBN 86-7892-019-X, a) Hemigrafija-praktikum
(U02) Pomoćni udžbenik za nastavni predmetJelena Kiurski, Miljana Prica, Julija Fišl, Hemija u grafičkom inženjerstvu - praktikum,Edicija "Tehničke nauke - Udžbenici": br.123 Fakultet tehničkih nauka,Novi Sad, 2005,ISBN 86-85211-65-4, a) Hemija-praktikum
(M22) Rad u istaknutom međunarodnom časopisuJ.Kiurski, D.Ž.Obadović, R.Marinković-Nedučin, E.Kiš, “Spinel-Type Structure of Co in Conditions of HDS Catalysts Aging”, Polyhedron, 18(5), 741-747 (1999)
(M22) Rad u istaknutom međunarodnom časopisuE.Kiš, R.Marinković-Nedučin, G.Lomić, G.Bošković, D.Ž.Obadović, J.Kiurski, P.Putanov, Structural and Textural Properties of the NiO-Al2O3 Catalyst”, Polyhedron, 17(1), 27-34 (1998)
(M22) Rad u istaknutom međunarodnom časopisuD.Ž.Obadović, J.Kiurski, R.Marinković-Nedučin, Electronic States of Ni(II) in Spinel-Type Structure”, Polyhedron, 15(20), 3631-3634 (1996)
(M22) Rad u istaknutom međunarodnom časopisuJ.S. Kiurski, J.G. Ranogajec, A.L.Ujhelji, M.M.Radeka, M.T.Bokorov, “Evaluation of the effect of lichens on ceramic roofing tiles by scanning electron microscopy and energy-dispersive spectroscopy analyses”, Scanning, 27, 113-119 (2005)
(M23) Rad u međunarodnom časopisuJ.S.Kiurski, D.Ž.Obadović, R.M.Marinković-Nedučin,“Energies of electronic states of promoter ions in hydrodesulfurization catalysts”,React.Kinet.Catal.Lett., Vol.82, No.1, 41-47 (2004)
(M23) Rad u međunarodnom časopisuJS Kiurski, DŽ Obadović, EE Kiš, RP Marinković-Nedučin, “Electronic states of Mn(II) in the kaolinite nanostructure”, React.Kinet.Catal.Lett., Vol.84,No.2, 359-366 (2005)
(M23) Rad u međunarodnom časopisuR.D.Mićić, R.P. Marinković-Nedučin, Z.Schay, I.Nagy, J.S. Kiurski, E.E.Kiss, «Influence of the activation temperature on structural and textural properties of NiMo/Al2O3 hydrodesulfurization catalysts», React.Kinet.Catal.Lett. 91(1), 85-92 (2007)
(M11) Istaknuta monografija međunarodnog značaja49. Jonjaua Ranogajec, Sinisa Markov, Jelena Kiurski, Miroslava Radeka, Vilma Ducman, Microbial Deterioration of Clay Roofing Tiles as a Function of the Firing Temperature, Journal of the American Ceramic Society, (2008) Vol. 91, 11, 2008 : 3762-3767
(M22) Rad u istaknutom međunarodnom časopisuM.Radeka, J.Ranogajec, J.Kiurski, S.Markov, R.Marinkovic-Neducin," Influence of lichen biocorosion on the quality of ceramic roofing tiles", Journal of the European Ceramic Society 27 (2007) 1763-1766
ZvanjeUža naučna oblastVisokoškolska ustanovaDatum izbora
Redovni profesorGrafičko inženjerstvo i dizajnFakultet tehničkih nauka14.07.2011.
Vanredni profesorGrafičko inženjerstvo i dizajnFakultet tehničkih nauka22.09.2006.
DocentGrafičko inženjerstvo i dizajnFakultet tehničkih nauka01.12.2001.