vanr. prof. dr Milan Rackov


Nedostaje slika

dr Milan Rackov

Vanredni profesor


Telefon021/485-2381
E-mail
Akademsko zvanjeVanredni profesor
KancelarijaKabinet 707

Upisao FTN mašinski odsek 1995. godine, diplomirao oktobra 2000. godine sa prosečnom ocenom 9,64 i ocenom diplomskog rada 10. Iste godine upisao postdiplomske studije na Smeru za mehaničke prenosnike, teoriju mehanizama i mašina. Na Fakultetu tehničkih nauka Univerziteta u Novom Sadu zaposlen od 15.02.2001.
Maja 2007. godine na Fakultetu tehničkih nauka Univerziteta u Novom Sadu odbranio je magistarsku tezu pod nazivom „Istraživanje konstrukcionih mogućnosti smanjenja otkaza univerzalnih zupčastih reduktora“.
Jula 2013. godine na Fakultetu tehničkih nauka Univerziteta u Novom Sadu odbranio je doktorsku disertaciju pod nazivom „Koncepcije razvoja univerzalnih zupčastih reduktora“.
Avgusta 2014. godine na Mašinskom fakultetu Slovačkog tehničkog univerziteta u Bratislavi odbranio je još jednu doktorsku disertaciju pod nazivom „Optimization of HCR Gearing Geometry from Scuffing Point of View“.
Milan Rackov je lokalni koordinator međunarodnog projekta CEEPUS III „Development of mechanical engineering (design, technology and production management) as an essential base for progress in the area of small and medium companies’ logistics - research, preparation and implementation of joint programs of study“, kao i učesnik ostalih CEEPUS III projekata i Tempus projekta 530577-TEMPUS-1-2012-1-RS-TEMPUS-JPCR „Improvement of Product Development Studies in Serbia and Bosnia and Herzegovina“.
Koeditor je stručnog časopisa „Machine Design“, ISSN 1821-1259.
Član je asocijacije ADEKO - Asocijacija za dizajn, elemente i konstrukcije.

Vanredni profesor
24.10.2018.
Radno mestoOdDoOrganizaciona jedinica
Stručni saradnik-Laborant25.09.2013.01.10.2013.Departman za mehanizaciju i konstrukciono mašinstvo
Asistent sa doktoratom03.07.2013.01.09.2013.Departman za mehanizaciju i konstrukciono mašinstvo
Asistent sa magistraturom25.09.2007.01.06.2013.Departman za mehanizaciju i konstrukciono mašinstvo
Asistent pripravnik14.10.2005.01.09.2007.Departman za mehanizaciju i konstrukciono mašinstvo
Tržište rada sss15.05.2004.01.09.2005.Departman za mehanizaciju i konstrukciono mašinstvo
Docent24.10.2013.Katedra za mašinske elemente, teoriju mašina i mehanizama i poljoprivredno mašinstvo
NazivU Ustanovi
Analiza uticaja oblika vratila elektromotora na nosivost motornog reduktora

Diploma

Mašinsko inženjerstvo

Fakultet tehničkih nauka

2000

Istraživanje konstrukcionih mogućnosti smanjenja otkaza univerzalnih zupčastih reduktora

Magistratura

Mašinsko inženjerstvo

Fakultet tehničkih nauka

2007

Koncepcije razvoja univerzalnih zupčastih reduktora

Doktorat

Mašinsko inženjerstvo

Fakultet tehničkih nauka

2013

Optimization of HCR Gearing Geometry from Scuffing Point of View

Doktorat

Mašinsko inženjerstvo

Slovak University of Technology in Bratislava

2014

Kriterijum produkcijeOpis
(M14) Monografska studija/poglavlje u knjizi M12 ili rad u tematskom zborniku međunarodnog značajaRackov M., Vereš M., Kanović Ž., Kuzmanović S.: HCR Gearing and Optimization of Its Geometry, In:Subic, A. (Ed.) Advances in Engineering Materials, Product and Systems Design, Zurich, Trans Tech Publications Inc., 2013, str. 117-132, ISBN 978-3-03785-585-0
(M14) Monografska studija/poglavlje u knjizi M12 ili rad u tematskom zborniku međunarodnog značajaKanović Ž., Rapaić M., Jeličić Z., Rackov M., Kapetina M., Atanacković-Jeličić J.: The Generalized Particle Swarm Optimization Algorithm with Aplication Examples. In: WenJun Zhang (Ed.), Self Organization – Theories and Methods, New York, Nova Publishers, 2013, str. 81-108, ISBN 978-1-62618-917-1
(M22) Rad u istaknutom međunarodnom časopisuBanić, Milan S., Stamenković, Dušan S., Miltenović, Vojislav, Milošević, Miloš S., Miltenović, Aleksandar V., Đekić, Petar S., Rackov, Milan J.: Prediction of heat generation in rubber or rubber-metal springs, Thermal Science, 2012, Vol.16, Suppl. 2, pp.S593-S606, DOI:10.2298/TSCI120503189B
(M22) Rad u istaknutom međunarodnom časopisuMiltenović, V. A., Kuzmanović, B. S., Miltenović, Đ. V., Tica, M. M., Rackov, J. M.: Thermal stability of crossed helical gears with wheels made from sintered steel, Thermal Science, 2012, Vol. 16, Suppl. 2, pp. S607-S619, doi:10.2298/TSCI120503190M
(M23) Rad u međunarodnom časopisuRackov M., Milovančević M., Kanović Ž., Vereš M., Rafa K., Banić M., Miltenović A.: Optimization of HCR Gearing Geometry Using Generalized Particle Swarm Optimization Algorithm, Tehnicki vjesnik - Technical Gazette, 2014, Vol. 21, No 4(2014), pp. 723-732, ISSN 1330-3651, UDK: 681.833.1:519.254
(M23) Rad u međunarodnom časopisuKuzmanović S., Vereš M., Rackov M.: Possible Ways of Reducing the Number of Gears in Universal Gear Units, Transactions of FAMENA, Zagreb, 2014, Vol. 38, No 1, pp. 77-86, ISSN 1333-1124
(M23) Rad u međunarodnom časopisuRackov, M., Kuzmanović, S., Anišić, Z.: Selecting the Size of the Universal Reducer, Taking into the Account its Thermal Load Capacity, Tehnicki vjesnik - Technical Gazette, 2018, Vol. 25, No 6(2018), pp. 1829-1836, ISSN 1330-3651, Online: ISSN 1848-6339, UDK: 681.833.1:519.254, DOI: 10.17559/TV-20170329230603
(M23) Rad u međunarodnom časopisuBanjanin, B., Vladić, G., Pal, M., Baloš, S., Dramićanin, M., Rackov, M., Knežević, I., Consistency analysis of mechanical properties of elements produced by FDM additive manufacturing technology, Revista Materia, Vol.23, No.4, ISSN 1517-7076, doi: 10.1590/S1517-707620180004.0584
(M33) Saopštenje sa međunarodnog skupa štampano u celiniRackov M., Čavić M., Penčić M., Knežević I., Vereš M., Tica M.: Reducing of Scuffing Phenomenon at HCR Spur Gearing, 5. International Conference on Advanced Manufacturing Engineering and Technologies - NEWTECH, Beograd: Springer, 5-9 Jun, 2017, pp. 141-155, ISBN 978-3-319-56429-6, UDK: DOI: 10.1007/978-3-319-56430-2_10
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKuzmanović S., Rackov M., Knežević I.: Mechanical Gear Transmissions Nowdays, 5. International Conference on Power Transmissions, Ohrid: Faculty of Mechanical Engineering, 5-8 Oktobar, 2016, pp. 39-46, ISBN 978-608-4624-25-7
(M33) Saopštenje sa međunarodnog skupa štampano u celiniRackov M., Kanović Ž., Čavić M., Penčić M., Kuzmanović S., Knežević I., Vereš M.: Adopting Suitable HCR Tooth Flank Geometry in Order to Increase the Resistance of Scuffing, 5. International Conference on Power Transmissions, Ohrid: Faculty of Mechanical Engineering, 5-8 Oktobar, 2016, pp. 47-54, ISBN 978-608-4624-25-7
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKuzmanović S., Rackov M., Vereš M.: Analysis of Requirements Corresponding to Development of Modern Products, 4. International Scientific Conference on Advances in Mechanical Engineering - ISCAME, Debrecen: University of Debrecen, Faculty of Engineering, Department of Mechanical Engineering, Debrecen, Hungary, 13-15 Oktobar, 2016, pp. 293-301, ISBN 978-963-473-944-9
(M33) Saopštenje sa međunarodnog skupa štampano u celiniRackov M., Kuzmanović S., Čavić M., Penčić M., Knežević I.: Influence of Operating and Ambient Temperature on Load Capacity of Universal Worm Gear Reducer, 13. International Conference on Accomplishments in Mechanical and Industrial Engineering - DEMI, Banja Luka: Faculty of Mechanical Engineering in Banja Luka, 26-27 Maj, 2017, pp. 533-538, ISBN 978-99938-39-72-9
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKuzmanović S., Rackov M., Knežević I.: Analysis of Selection Procedures of Universal Worm Gear Units, 9. The 9th International Symposium - KOD 2016 - Machine and Industrial Design in Mechanical Engineering, Balatonfured: University of Novi Sad, Faculty of Technical Sciences, Serbia / Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Slovakia, 9-12 Jun, 2016, pp. 73-78, ISBN 978-86-7892-821-5
(M33) Saopštenje sa međunarodnog skupa štampano u celiniRackov M., Knežević I., Kuzmanović S., Čavić M., Penčić M., Ianici S.: Proposal of Assessment Method of Different Quality Solutions of Universal Gear Reducers, 3. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina: Faculty of Mechanical Engineering in East Sarajevo, 7-9 Decembar, 2016, pp. 301-308, ISBN 978-99976-623-7-8
(M33) Saopštenje sa međunarodnog skupa štampano u celiniAlexa, V., Kiss, I., Rackov, M., Kuzmanović, S.: Study on the Advance and Delay Phenomenon’s in the Asymmetric Longitudinal Rolling Process, 7. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Balatonfured: University of Novi Sad, Faculty of Technical Sciences, Serbia / Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Slovakia, 24-26 May, 2012, pp. 415-420, ISBN 978-86-7892-399-9
(M33) Saopštenje sa međunarodnog skupa štampano u celiniVereš, M., Kuzmanović, S., Rackov, M.: Experimental Research of HCR Gearing From Pitting Damage Point of View, 7. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Balatonfured: University of Novi Sad, Faculty of Technical Sciences, Serbia / Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Slovakia, 24-26 May, 2012, pp. 317-320, ISBN 978-86-7892-399-9
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKuzmanović, S., Mitrović, R., Rackov, M., Miltenović, Đ.: Evaluation and Choice of Conceptual Solutions for a Universal Motor Gear Reducer, The 4th Power Transmissions, Sinaia: University Politehnica of Bucharest, The Faculty of Mechanical Engineering and Mechatronics, 20-23 June, 2012
(M33) Saopštenje sa međunarodnog skupa štampano u celiniRackov, M., Trbojević, R., Kuzmanović, S.: Influence of Gear Helix Angle on Axial Loading Capacity of Output Shaft of Helical Gear Units, 8th International Symposium on Interdisciplinary Regional Research, Hungary-Romania-Serbia & Montenegro, Szeged Regional Committee of the Hungarian Academy of Sciences, Szeged, April 19-21, 2005, Section 3, No. TSP13
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKuzmanović, S., Rackov, M.: Service Life of Universal Gear Reducers, 22. DAAAM International Symposium, Vienna: DAAAM International Vienna, International Academy of Engineering, Vienna University of Technology, University of Applied Sciences, Technikum Vienna and Austrian Society of Engineers and Architects - Öiav 1848, Editor: B.[Ranko] Katalinic, 23-26 Novembar, 2011, pp.1097-1098, ISBN 1726-9679679
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKuzmanović, S., Rackov, M.: Evaluation of Conceptual Solutions of Universal Helical Two Stage Gear Units, 10. International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology - DEMI, Banja Luka: University of Banja Luka, Faculty of Mechanical Engineering, 26-28 May, 2011, pp. 151-158, ISBN 978-99938-39-36-1
(M33) Saopštenje sa međunarodnog skupa štampano u celiniBarišić, B., Kuzmanović, S., Rackov, M.: Effect of External Loads at the Output Shaft End of Universal Worm Gear Reducer on Its Thermal Capacity, 7. IRMES-Naučno-stručni skup Istraživanje i razvoj mašinskih elemenata i sistema, Zlatibor: University of Niš, Mechanical Engineering Faculty, 27-28 April, 2011, pp. 535-540, ISBN 978-86-6055-012-7
(M33) Saopštenje sa međunarodnog skupa štampano u celiniRackov, M., Kuzmanović, S.: Proposal of Assessment Method for the Conceptual Design of Universal Helical Gear Reducers, 7. IRMES-Naučno-stručni skup Istraživanje i razvoj mašinskih elemenata i sistema, Zlatibor: University of Niš, Mechanical Engineering Faculty, 27-28 April, 2011, pp. 469-474, ISBN 978-86-6055-012-7
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKuzmanović, S., Rackov, M.: Directions of Development of Universal Speed Reducers, 1. General Machine Design, Rousse: University of Ruse "Angel Kanchev", 15-16 Oktober, 2009, pp. 31-34, ISBN ISSN 1313-9193
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKuzmanović, S., Rackov, M.: Analysis of Influence of Axial Load of Output Shaft of Universal Motor Gear Reducer on Their Operating Life, 6. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Palić: Fakultet tehničkih nauka, Novi Sad, 29-30 Septembar, 2010, pp. 159-162, ISBN 978-86-7892-278-7
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKuzmanović, S., Mitrović, R., Rackov, M., Miltenović, Đ.: Evaluation and Choice of Conceptual Solutions for a Universal Motor Gear Reducer, The 4th Conference Power Transmissions, 20-23 June, 2012, Sinaia, University Politehnica of Bucharest, The Faculty of Mechanical Engineering and Mechatronics
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKuzmanović, S., Rackov, M.: Development Tendencies of Universal Gear Reducers, The 3rd Conference of Power Transmissions, Kallithea: Balkan Association for Power Transmissions, 1 Oktober, 2009, pp. 145-148, ISBN 978-960-243-662-2
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKuzmanović, S., Rackov, M.: Design Analysis of Housings of Universal Multistage Helical Motor Gear Units, 5. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Faculty of Technical Sciences, Novi Sad, 11-12 November, 2010, pp. 255-260, ISBN 978-86-7892-294-7
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKuzmanović, S., Vereš, M., Rackov, M.: Product Design as the Key Factor for Development in Mechanical Engineering, 1. Mechanical Engineering in XXI Century, Niš: Mašinski fakultet u Nišu, 25-26 November, 2010, pp. 113-116, ISBN 978-86-6055-008-0
(M33) Saopštenje sa međunarodnog skupa štampano u celiniRackov, M., Kuzmanović, S.: Analysis of the Most Common Failures of Gears in Universal Gear Reducers, 10. International Symposium on Interdisciplinary Regional Research - ISIRR, Hunedoara: ISIRR, 23-24 April, 2009, pp. 1-8
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKuzmanović, S., Vereš, M., Rackov, M., Trbojević, R.: Possibilities of Modern Monitoring Universal Gear Reducers, 5. International Symposium about forming and design in mechanical engineering KOD, Novi Sad: Faculty of Technical Sciences, Novi Sad, 15-16 April, 2008, pp. 339-342, ISBN 978-86-7892-104-9
(M33) Saopštenje sa međunarodnog skupa štampano u celiniRackov, M., Kuzmanović, S., Trbojević, R.: Assessment of Service Life of Universal Motor Gear Reducers, The 2nd Conference of Power Transmissions, Novi Sad, Faculty of Technical Sciences, 25-26 April, 2006, pp. 505-508, ISBN 86-85211-78-6
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKuzmanović, S., Trbojević, R., Rackov, M.: Influence of Teeth Parameters on Stiffness of Gear Pair, 9. Mechanical Engineering (Strojné inžinierstvo), Bratislava: Faculty of Mechanical Engineering, Slovak University of Technology in Bratislava, 16 November, 2005, pp. 896-901, ISBN 80-227-2314-2
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKrajcovic A., Vereš M., Rackov M., Kuzmanović S.: Contribution to the Study of HCR Gearing Properties From Warm Scuffing Damage Point of View, 8. The Eighth International Symposium - KOD 2014 - Machine and Industrial Design in Mechanical Engineering, Balatonfured: University of Novi Sad, Faculty of Technical Sciences, Serbia / Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Slovakia, 12-15 Jun, 2014, pp. 171-176, ISBN 978-86-7892-615-0
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKuzmanović S., Rackov M., Knežević I., Rafa K., Tica M.: Possibilities of Increasing Efficiency of Mechanical Transmissions, 8. The Eighth International Symposium - KOD 2014 - Machine and Industrial Design in Mechanical Engineering, Balatonfured: University of Novi Sad, Faculty of Technical Sciences, Serbia / Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Slovakia, 12-15 Jun, 2014, pp. 207-210, ISBN 978-86-7892-615-0
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKuzmanović S., Vladić G., Rackov M.: NEW AND CREATIVE PRODUCT IDEA GENERATION, ASSOCIATION METHOD, 7. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: FACULTY OF TECHNICAL SCIENCES DEPARTMENT OF GRAPHIC ENGINEERING AND DESIGN, 13-14 Novembar, 2014, pp. 467-471, ISBN 78-86-7892-645-7
(M33) Saopštenje sa međunarodnog skupa štampano u celiniRafa K., Rackov M., Knežević I.: Improvement of Business Processes in Production System Concerning Repair and Installation of Brake Systems for Rail Vehicles, 16. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department for Industrial Engineering and Management, 15-17 Oktobar, 2014, pp. 41-44, ISBN 978-86-7892-652-5
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKuzmanović S., Rackov M., Vereš M.: Osnovne odlike savremenih bezazornih prenosnika, 2. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina: University of East Sarajevo, Faculty of Mechanical Engineering, East Sarajevo, 2-5 Decembar, 2014, pp. 443-450, ISBN 978-99976-623-1-6
(M33) Saopštenje sa međunarodnog skupa štampano u celiniM. Rackov, S. Kuzmanović, R. Trbojević: ASSESSMENT OF SERVICE LIFE OF UNIVERSAL MOTOR GEAR REDUCERS, Rad je saopšten na 2nd International conference „Power Transmissions 2006“, 25. i 26. aprila 2006. u Novom Sadu, štampan u zborniku radova Proceedings, str. 505-508, i objavljen na CD-u konferencije
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKuzmanović S., Rackov M., Rafa K., Tica M.: Analysis of Existing Calculation Methods for Group Bolted Joints Loaded by a Moment Perpendicular to the Joint Plane, 2. MECHANICAL ENGINEERING IN XXI CENTURY, Niš: University of Niš, Faculty of Mechanical Engineering, 20-21 Jun, 2013, pp. 205-208, ISBN 978-86-6055-039-4
(M33) Saopštenje sa međunarodnog skupa štampano u celiniVereš M., Kanović Ž., Rackov M.: HCR Gearing Geometry Optimization by using of Generalized Particle Swarm Algorithm, 54. International Conference of Machine Design Departments, Liberec, 12 Septembar, 2013, pp. 451-456, ISBN 978-80-7372-986-8
(M33) Saopštenje sa međunarodnog skupa štampano u celiniČavić M., Penčić M., Rackov M., Knežević I., Zlokolica M.: Dynamic Optimization of the Cam-Lever Mechanism for Thermoforming Machine Tool Driving, 5. International Conference on Advanced Manufacturing Engineering and Technologies - NEWTECH, Beograd: Springer, 5-9 Jun, 2017, pp. 185-198, ISBN 978-3-319-56429-6, UDK: DOI: 10.1007/978-3-319-56430-2_13
(M33) Saopštenje sa međunarodnog skupa štampano u celiniPenčić M., Čavić M., Rackov M., Borovac B., Knežević I., Zlokolica M.: Kinematic Analysis of the Robot Eyes Drive System with 7 DOFs, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad: Faculty of Technical Sciences in Novi Sad, 8-10 Jun, 2017, pp. 1-5, ISBN 978-86-7892-934-2
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKnežević I., Čavić M., Bojić S., Rackov M., Penčić M., Surčinski J., Zlokolica M.: Optimal Design of the Mechanism for Configuration Change of the Seedbed Cultivator, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad: Faculty of Technical Sciences in Novi Sad, 8-10 Jun, 2017, pp. 1-5, ISBN 978-86-7892-934-2
(M33) Saopštenje sa međunarodnog skupa štampano u celiniIvanović L., Marković B., Arsovski S., Rackov M., Kuzmanović S.: Emotional Design and Quality of Life, 2. International Conference on Quality of Life, Kragujevac: Center for Quality, Faculty of Engineering, University of Kragujevac, 8-10 Jun, 2017, pp. 87-94, ISBN 978-86-6335-043-4
(M33) Saopštenje sa međunarodnog skupa štampano u celiniČavić M., Penčić M., Rackov M., Zlokolica M.: Dynamic Optimization of the Pulse Continuously Variable Transmission, 5. International Conference on Power Transmissions, Ohrid: Faculty of Mechanical Engineering in Skopje, 5-8 Oktobar, 2016, pp. 123-131, ISBN 978-608-4624-25-7
(M33) Saopštenje sa međunarodnog skupa štampano u celiniPenčić M., Čavić M., Rackov M., Borovac B., Lu Z.: Optimization of Planetary Gear Trains with Spur, Helical and Double Helical Gears, 8. International Scientific and Expert Conference (TEAM), Trnava: Faculty of Materials Science and Technology in Trnava, 19-21 Oktobar, 2016, pp. 29-34, ISBN 978-80-8096-237-1
(M33) Saopštenje sa međunarodnog skupa štampano u celiniČavić M., Penčić M., Rackov M., Knežević I., Zlokolica M.: Dynamic Analysis of the Thermoforming Machine Working Mechanism, 3. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina: Faculty of Mechanical Engineering in East Sarajevo, 7-9 Decembar, 2016, pp. 177-184, ISBN 978-99976-623-7-8
(M33) Saopštenje sa međunarodnog skupa štampano u celiniMiltenović A., Banić M., Miltenović V., Rackov M., Bucha J.: Prediction of heat generation in meshing of HRC gears, 6. International Conference on Gears, Minhen: VDI-Society for Product and Process Design, 5-7 Oktobar, 2015, pp. 871-882, ISBN 978-3-18-092255-3
(M33) Saopštenje sa međunarodnog skupa štampano u celiniVereš M., Kožuch I., Rackov M., Kuzmanović S.: Contribution to Solving the Non-Involute Gearing Profiles Production, 3. International Conference Mechanical Engineering in XXI Century, Niš: Mašinski fakultet Univerziteta u Nišu, 17-18 Septembar, 2015, pp. 161-166, ISBN 978-86-6055-072-1
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKuzmanović S., Rackov M., Vereš M.: Analysis of Application of Universal Shaft-Mounted Gear Reducer, 3. International Conference Mechanical Engineering in XXI Century, Niš: Mašinski fakultet Univerziteta u Nišu, 17-18 Septembar, 2015, pp. 183-186, ISBN 978-86-605-5-072-1
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKuzmanović S., Rackov M., Knežević I., Rafa K., Tica M.: Possibilities of Increasing Efficiency of Mechanical Transmissions, 8. International Symposium - KOD - Machine and Industrial Design in Mechanical Engineering, Balatonfured: University of Novi Sad, Faculty of Technical Sciences, Serbia / Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Slovakia, 12-15 Jun, 2014, pp. 207-210, ISBN 978-86-7892-615-0
(M42) Monografija nacionalnog značaja, monografsko izdanje građe,Kuzmanović, S., Rackov, M.: Bezazorni prenosnici u vojnom mašinstvu, Vojnotehnički institut, Beograd, 2012, str.101, ISBN 978-86-81123-51-5
(M45) Poglavlje u knjizi M42 ili rad u tematskom zborniku nacionalnog značajaKuzmanović, S., Rackov, M.: Globalization Influence on Product Assortment and Process of Product Development, Poznan University of Technology, Poznan, Poland, 2006, str. 323-330, ISBN 83-89873-28-1
(M45) Poglavlje u knjizi M42 ili rad u tematskom zborniku nacionalnog značajaKuzmanović, S., Rackov, M., Vereš, M.: Product Lifetime, Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Bratislava, 2009, str.135-144, ISBN 978-80-227-3326-7
(M45) Poglavlje u knjizi M42 ili rad u tematskom zborniku nacionalnog značajaVereš, M., Harman, B., Kuzmanović, S., Rackov, M.: Determination of the Correct Mating Cylindrical Teeth Flanks Profiles When the Path of Contact is Given, Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Bratislava, 2009, str. 145-151, ISBN 978-80-227-3326-7
(M45) Poglavlje u knjizi M42 ili rad u tematskom zborniku nacionalnog značajaMenadžment životnim ciklusom proizvoda / [autori Siniša Kuzmanović, Milan Rackov, Biljana Marković, Milan Banić, Aleksandar Miltenović, Zoran Anišić, Duško Pavletić, Tonči Mikac, Milan Ikonić, Milovan Lazarević, Ilija Ćosić] ; priređivači Siniša Kuzmanović, Milan Ikonić, Zoran Anišić. - Novi Sad : Fakultet tehničkih nauka, 2013 (Novi Sad : FTN, Grafički centar GRID) . - (Edicija "Tehničke nauke - monografije" ; 53), ISBN 978-86-7892-509-2
(M51) Rad u vodećem časopisu nacionalnog značajaKanović Ž., Rackov M., Petković M., Vereš M.: GPSO algorithm in HCR gearing geometry optimization, Journal on Processing and Energy in Agriculture, 2015, Vol. 19, No 4, pp. 31-35, ISSN 1821-4487
(M51) Rad u vodećem časopisu nacionalnog značajaRackov M., Kuzmanović S., Knežević I., Čavić M., Penčić M.: Analysis of Justification for Applying Two Gear Sets within the Universal Gear Reducers, MATEC Web of Conferences, 2017, Vol. 121, pp. 10131-10138, ISSN 2261-236X, UDK: DOI: 10.1051/matecconf/201712108005
(M51) Rad u vodećem časopisu nacionalnog značajaPenčić M., Čavić M., Savić S., Rackov M., Borovac B., Lu Z.: Assistive Humanoid Robot MARKO: Development of the Neck Mechanism, MATEC Web of Conferences, 2017, Vol. 121, pp. 1-8, ISSN 2261-236X, UDK: DOI: 10.1051/matecconf/201712108005
(M51) Rad u vodećem časopisu nacionalnog značajaKrajcovic A., Vereš M., Rackov M., Kuzmanović S.: Contribution to the Study of HCR Gearing Properties From Warm Scuffing Damage Point of View, Machine Design, 2014, Vol. 6, No 4, pp. 121-126, ISSN 1821-1259
(M51) Rad u vodećem časopisu nacionalnog značajaKuzmanović, S., Rackov, M., Rafa, K.: Benefits of the Application of Cycloidal Backlash Gear Reducers With More Eccentric Shafts, Balkan Journal of Mechanical Transmissions - BJMT, 2012, Vol. 2, No.1, pp. 33-38, ISSN 2069-5497
(M51) Rad u vodećem časopisu nacionalnog značajaRackov, M., Kuzmanović, S.: Proposal of Assessment Method for the Conceptual Design of Universal Helical Gear Reducers, Balkan Journal of Mechanical Transmissions - BJMT, 2011, Vol. 1, No.2, pp.69-75, ISSN 2069-5497
(M51) Rad u vodećem časopisu nacionalnog značajaKuzmanović, S., Rackov, M., Vereš, M.: Testing of Universal Gear Reducers, Budowa Maszyn i Zarzadzanie Produkcja, 2008, No.8, pp.51-56, ISSN 1733-1919
(M51) Rad u vodećem časopisu nacionalnog značajaRackov, M., Trbojević, R., Kuzmanović, S.: Analiza opravdanosti primene zupčanika sa različitim nosivostima u okviru univerzalnih zupčastih reduktora / Justification Analysis of Application of Gears With Different Load Capacity for Universal Spur Gear Units, Konstruisanje mašina / Journal of Mechanical Engineering Design, Vol. 8, No.1-2005, str. 32 - 35, ISSN 1450-5401
(M51) Rad u vodećem časopisu nacionalnog značajaKuzmanović, S., Rackov, M.: Usual Possibile Ways of Increasing of Speed Rations Values of Universal Gear Reducers, Acta Technica Napocensis - Applied Mathematics and Mechanics, 2009, No.52, pp.221-226, ISSN 1221-5872
(M51) Rad u vodećem časopisu nacionalnog značajaKuzmanović, S., Vereš, M., Rackov, M.: Analysis of Characteristical Mounting Ways of Gear Wheels In Universal Gear Reducers, Budowa Maszyn i Zarzadzanie Produkcja, 2009, No.11, pp.81-90, ISSN 1733-1919
(M51) Rad u vodećem časopisu nacionalnog značajaKuzmanović, S., Ianici, S., Rackov, M.: Life Cycle Influence on the Policy of Product Development, Annals of the Oradea University - Fascicle of Management and Technological Engineering, 2009, Tome VII, pp.754-761, ISSN 1583–0691
(M51) Rad u vodećem časopisu nacionalnog značajaRackov, M., Kuzmanović, S.: Analysis of the Most Common Failures of Gears in Universal Gear Reducers, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2009, Vol. 7, No.4, pp.67-74, ISSN 1584-2665
(M51) Rad u vodećem časopisu nacionalnog značajaKuzmanović, S., Rackov, M.: Factors That Influence on Product Lifetime, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2010, No.2010-2, pp.239-244, ISSN 1584-2665
(M53) Rad u naučnom časopisuKuzmanović, S., Trbojević, R., Rackov, M.: Analiza uticaja međuosnog rastojanja na veličinu najvećeg prenosnog odnosa zupčastog reduktora, TEHNIKA 2001, No.2, str. M9-12, ISSN 0040-2176
(M53) Rad u naučnom časopisuVereš, M., Bošanský, M., Rackov, M.: Theoretical and Experimental Research of the HCR Gear’s Contact Strength, Machine Design, 2011, Vol.3, No.2, pp. 105-108, ISSN 1821-1259
(M53) Rad u naučnom časopisuKuzmanović, S., Lucian, T., Rackov, M.: Ispitivanje univerzalnih reduktora tokom eksploatacije / Testing of Universal Gear Reducers During the Exploitation, Konstruisanje mašina / Journal of Mechanical Engineering Design, 2008, Vol.11, No.1, pp.45-52, ISSN 1450-5401
(U01) Osnovni udžbenik za nastavni predmetInženjerske grafičke komunikacije / Zoran Milojević, Milan Rackov, Ivan Knežević, Mirjana Bojanić - 1. izd. - Novi Sad : Fakultet tehničkih nauka, 2017 (Novi Sad : FTN, Grafički centar GRID) . - (Edicija "Tehničke nauke - udžbenici" ; 611), ISBN 978-86-7892-887-1
(U01) Osnovni udžbenik za nastavni predmetSpecijalni mašinski elementi poljoprivrednih mašina / Siniša Kuzmanović, Milan Rackov, Maja Čavić, Milan Kostić. - Novi Sad : Univerzitet u Novom Sadu, 2015 (Petrovaradin : Futura), ISBN 978-86-499-0198-8
(U01) Osnovni udžbenik za nastavni predmetIndustrijski dizajn / Lozica Ivanović, Simiša Kuzmanović, Miroslav Vereš, Milan Rackov, Biljana Marković, Vojislav Miltenović. - Kragujevac : Fakultet inženjerskih nauka, 2015 (Kragujevac : Interprint), ISBN 978-86-6335-017-5
(U02) Pomoćni udžbenik za nastavni predmetIzrada konstrukcione dokumentacije / Zoran Milojević, Milan Rackov, Siniša Kuzmanović, Ivan Knežević, . - Novi Sad : Univerzitet u Novom Sadu, 2015 (Petrovaradin : Futura), ISBN 978-86-499-0198-8
(U02) Pomoćni udžbenik za nastavni predmetKuzmanović, S., Trbojević, R., Rackov, M.: Zbirka zadataka iz mašinskih elemenata, Fakultet tehničkih nauka, Novi Sad, 2016, str.198, ISBN 978-86-7892-836-9
(U02) Pomoćni udžbenik za nastavni predmetKuzmanović, S., Trbojević, R., Rackov, M.: Zbirka zadataka iz mašinskih elemenata, Fakultet tehničkih nauka, Novi Sad, 2009, str.198, ISBN 978-86-7892-154-4
(U02) Pomoćni udžbenik za nastavni predmetKuzmanović, S., Trbojević, R., Rackov, M.: Zbirka zadataka iz mašinskih elemenata, Fakultet tehničkih nauka, Novi Sad, 2003, str.198, ISBN 978-86-80249-68-8
(U02) Pomoćni udžbenik za nastavni predmetMašinski elementi - priručnik / Biljana Marković, Mirko Blagojević, Zorica Đorđević, Milan Rackov, Žarko Mišković, Aleksandar Košarac. - Istočno Sarajevo: Univerzitet u Istočnom Sarajevu, Mašinski fakultet, 2015 (Banja Luka: Comesgrafika d.o.o.), ISBN 978-99976-623-4-7
ZvanjeUža naučna oblastVisokoškolska ustanovaDatum izbora
Vanredni profesorMašinski elementi, mehanizmi i inženjerske grafičke komunikacijeUniverzitet u Novom Sadu24.10.2018.
DocentMašinski elementi, mehanizmi i inženjerske grafičke komunikacijeUniverzitet u Novom Sadu24.10.2013.
AsistentMašinski elementi, principi konstruisanja, teorija mašina i mehanizama, prenos snage i kretanja i inž.komunikacije25.09.2010.
Asistent pripravnik RMehanizacija i konstrukciono mašinstvoFakultet tehničkih nauka11.06.2009.
AsistentMašinski elementi, principi konstruisanja, teorija mašina i mehanizama, prenos snage i kretanja i inž.komunikacijeFakultet tehničkih nauka30.09.2007.
Asistent pripravnikMašinski elementi, principi konstruisanja, teorija mašina i mehanizama, prenos snage i kretanja i inž.komunikacijeFakultet tehničkih nauka15.02.2001.