() Research published in the top international journal
Petković D., Gocić M., Trajković S., Milovančević M., Šević D.: Precipitation concentration index management by adaptive neuro-fuzzy methodology, Climatic Change, 2017, ISSN 0165-0009
() Research published in the prominent international journal
Jocanović M., Šević D., Karanović V., Beker I., Dudić S.: Increased Efficiency of Hydraulic Systems Trough Reliability Theory and Monitoring of System Operating Parameters, Strojniski vestnik - Journal of Mechanical Engineering, 2012, Vol. 58, No 4, pp. 281-288, ISSN 0039-2480
() Research published in the prominent international journal
Brkljač N., Šević D., Beker I., Kesić I., Milisavljević S.: Procedure for treatment of hazardous waste by MID-MIX procedure in Serbia, International Journal of the Physical Sciences, 2012, Vol. 7, No 18, pp. 2639-2646, ISSN 1992-1950
() Research published in the prominent international journal
Duđak Lj., Milisavljević S., Jocanović M., Kiš (Kiss) F., Šević D., Karanović V., Orošnjak M.: Life Cycle Assessment of Different Waste Lubrication Oil Management Options in Serbia, Applied Sciences, 2021, ISSN 2076-3417
() Research published in the international journal
Beker I., Kesić I., Radlovački V., Delić M., Šević D., Morača S.: Improvement of the Maintenance Management of Complex Technical Systems Which Demand High Reliability, Tehnicki vjesnik - Technical Gazette, 2016, Vol. 24, No 5, ISSN 1330-3651, UDK: 163.42
() Research published in the international journal
Orošnjak M., Jocanović M., Gvozdenac Urošević B., Šević D., Duđak Lj., Karanović V.: Bus Fleet Management: A Systematic Literature Review, Promet - Traffic and Transportation, 2020, Vol. 6, ISSN 0353-5320
() Research published in the international journal
Orošnjak M., Jocanović M., Gvozdenac Urošević B., Šević D., Duđak Lj., Karanović V.: Bus Fleet Management: A Systematic Literature Review, Promet - Traffic and Transportation, 2020, Vol. 32, No. 6, pp. 761-772, ISSN 0353-5320
() Invited lectures from the international meeting printed in its entirety
Ušćebrka G., Žikić D., Stojanović S., Šević D.: An example of model of estimating the level of biological risk on farms based on the GAP requirements, 1. International Scientific-and-Practical Conference "Transmissible diseases of animals: actual aspects of biosafety and control", Alushta: National Academy of Agrarian Sciences of Ukraine, 21-25 Maj, 2012, pp. 71-74, ISBN 0321-0502
() Invited lectures from the international meeting printed in its entirety
Ušćebrka G., Žikić D., Stojanović S., Šević D.: An Example of Model of Estimating the Level of Biological Risk On Farms Based On the Gap Requirements, Veterinary Medicine, , UDK: 619
() Invited lectures from the international meeting printed in its entirety
Šević D., Beker I., Brkljač N., Kesić I.: Generički model analize uzročnika problema neodvijanja definisanih procesa preduzeća sa načinom njihovih prevazilaženja, 9. Evropska nedelja kvaliteta - JUSK EQW, Novi Sad: JUSK, 14-15 Novembar, 2012, pp. 58-64
() Report from the international meeting printed in its entirety
D. Šević, I. Beker „Projektovanje greda na bazi pouzdanosti“, Naučno – stručni skup ISTRAŽIVANJE I RAZVOJ MAŠINSKIH ELEMENATA I SISTEMA – Jahorina – IRMES 2002., Srpsko Sarajevo – Jahorina, Septembar 2002
() Report from the international meeting printed in its entirety
D. Šević, I. Beker „Zahtevi standarda ISO 9000:2000 i njihova primena u održavanju“, XXVI Majski skup održavalaca Jugoslavije, Novi Sad, 22-24. maj 2002
() Report from the international meeting printed in its entirety
N. Stefanović, N. Radaković, D. Šević "Primena softverskog sistema za upravljanje poslovnim procesima na sistema menadžmenta kvalitetom ISO 9001:2000", XIII Naučna konferencija INDUSTRIJSKI SISTEMI IS 2005, Herceg Novi, Srbija i Crna Gora, Septembar 2005
() Report from the international meeting printed in its entirety
D. Šević, I. Beker, S. Milisavljević „Uporedna analiza zahteva standarda ISO 14001:2004 i standarda ISO 14001:1996“, Menadžment totalnim kvlaitetom & izvrsnost – European Quality Week, Novi Sad, October 31st - November 2nd 2006
() Report from the international meeting printed in its entirety
Ušćebrka, G., Žikić, D., Stojanović, S., Šević, D.: Poljoprivredno-prehrambena industrija u Srbiji i njena dobra praksa kvaliteta., Total Quality Management & Excellence, 2007, Vol. 35, No. 4, str. 1- 7, UDK: 658.5, ISSN 0354-9771
() Report from the international meeting printed in its entirety
mr Dragoljub Šević, mr Slobodan Morača, M.Sc. Stevan Milisavljević "Planiranje učinka zaštite životne sredine", XIV Međunarodna naučna konferencija INDUSTRIJSKI SISTEMI IS 2008, Novi Sad, Srbija, 2-3. Oktobar 2008, str. 363-367, UDK 685.5, ISBN 978-86-7892-135-3
() Report from the international meeting printed in its entirety
Šević D., Beker I., Marić A.: Design based on probabilistic approach, 10. International Conference "Research and Development in Mechanical Industry" – RaDMI, Donji Milanovac, 16-19 Septembar, 2010, pp. 940-945, ISBN 978-86-6075-017-6
() Report from the international meeting printed in its entirety
Šević D.: PRIMENA ZAKONA O UPRAVLJANJU OTPADOM U POLJOPRIVREDI I PREHRAMBENOJ INDUSTRIJI, UDK: 658.5
() Report from the international meeting printed in its entirety
Šević D., Morača S., Marić A., Prokopić L.: Material Handling In the Function of Heightening the Logistic Processes Effectiveness, 15. International Scientific Conference on Industrial Systems - IS, Novi Sad, 14-16 Septembar, 2011, pp. 273-277, ISBN 978-86-7892-341-8, UDK: 658.5
() Report from the international meeting printed in its entirety
Morača S., Hadžistević M., Šević D.: Value Creation in Business Networks, 3. International Conference for Entrepreneurship, Innovation and Regional Development ICEIRD, Novi Sad: Fakultet tehničkih nauka, 27-29 Maj, 2010, pp. 553-558, ISBN 978-86-7892-250-3
() Report from the international meeting printed in its entirety
Beker I., Stanivuković D., Šević D.: Gearbox and gear transmission maintenance – overview of the published papers , 2. Power Transmissions, Novi Sad: Fakultet tehničkih nauka, 25-26 April, 2006, pp. 543-547, ISBN 86-85211-78-6, UDK: 621.83
() Report from the international meeting printed in its entirety
Stanivuković D., Beker I., Šević D.: Trends in development of logistics and logistics management - an overview , Industrijski sistemi, 2005, pp. 527-539, UDK: 658.5
() Report from the international meeting printed in its entirety
Stefanović N., Radaković N., Šević D.: Workflow Management Systems Applied On Quality Management System ISO 9001:2000, 13. International Scientific Conference on Industrial Systems - IS, Herceg Novi: Fakultet tehničkih nauka - Odsek za industrijsko inženjerstvo i menadžment, 7-9 Septembar, 2005, pp. 415-423, ISBN 86-7780-008-5, UDK: 658.5
() Report from the international meeting printed in its entirety
Stanivuković D., Kamberović B., Beker I., Šević D.: TENDENCIJE RAZVOJA KVALITETA, POUZDANOSTI, ODRŽAVANjA I LOGISTIKE Naziv skupa: XII međunarodna konferencija IS 2002, Vrnjačka Banja, 2002. , 12. International Scientific Conference on Industrial Systems - IS, Vrnjačka Banja: Institut za industrijske sisteme, FTN, Novi Sad, 22-23 Novembar, 2002, pp. 75-89
() Report from the international meeting printed in its entirety
Šević D.: Primena teorije pouzdanosti na projektovanju greda Naziv skupa: XII Naučna konferencija INDUSTRIJSKI SISTEMI IS 2002 , Industrijski sistemi, 2002, pp. 188-194, UDK: 658.5
() Report from the international meeting printed in its entirety
Beker I., Šević D., Milisavljević S., Radlovački V., Delić M., Brkljač N.: Is Economy of Vojvodina ready for joining EU ?, 8. International Scientific and Expert Conference (TEAM), Trnava: Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology in Trnava, 19-21 Oktobar, 2016, pp. 355-360
() Report from the international meeting printed in its entirety
Delić M., Milić B., Marjanović U., Vulanović S., Šević D.: Fostering learning organisation through authentic leadership and employees’ affective commitment, 19. QMOD-ICQSS International Conference on Quality and Service Sciences, Rim: Lund University Library Press, 21-23 Septembar, 2016, pp. 1127-1139, ISBN 978-91-7623-086-2
() Report from the international meeting printed in its entirety
Beker I., Šević D., Milisavljević S., Radlovački V., Delić M., Brkljač N.: Is Economy of Vojvodina ready for joining EU ?, 8. International Scientific and Expert Conference (TEAM), Trnava: Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology in Trnava, 19-21 Oktobar, 2016, pp. 355-360
() Report from the international meeting printed in its entirety
Šević D.: Primena teorije pouzdanosti na projektovanju greda Naziv skupa: XII Naučna konferencija INDUSTRIJSKI SISTEMI IS 2002 , International Journal of Industrial Engineering and Management, 2002, pp. 188-194, ISSN 2217-2661, 12. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Vrnjačka Banja: Fakultet tehničkih nauka, 22-23 Novembar, 2002, pp. 188-194, UDK: 658.5
() Report from the international meeting printed in its entirety
Stanivuković D., Beker I., Šević D.: Autori: Dragutin Stanivuković, Ivan Beker, Dragoljub Šević Naziv: TRENDS IN DEVELOPMENT OF LOGISTICS AND LOGISTICS MANAGEMENT – AN OVERVIEW Naziv skupa: Scientific Conference on INDUSTRIAL SYSTEMS , 13. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Herceg Novi: Fakultet tehničkih nauka, 7-9 Septembar, 2005, pp. 527-538, ISBN 86-7780-008-5, UDK: 658.5
() Report from the international meeting printed in its entirety
Beker I., Stanivuković D., Šević D.: Savremene koncepcije održavanja i japanski jezik Naziv skupa: Naučno – stručni skup IRMES 06 – „ ISTRAŽIVANJE I RAZVOJ MAŠINSKIH ELEMENATA I SISTEMA“ , 0. IRMES-Naučno-stručni skup Istraživanje i razvoj mašinskih elemenata i sistema, Banja Luka, 21-22 Septembar, 2006
() Report from the international meeting printed in its entirety
Beker I., Stanivuković D., Šević D.: Autori: Ivan Beker, Dragutin Stanivuković, Dragoljub Šević Naziv: CONTEMPORARY MAINTENANCE CONCEPTS AND JAPANESE LANGUAGE Naziv skupa: IRMES'06, Istraživanje i razvoj mašinskih elemenata i sistema , 0. IRMES-Naučno-stručni skup Istraživanje i razvoj mašinskih elemenata i sistema, Banja Luka: Mašinski fakultet, Banja Luka, 21-22 Septembar, 2006
() Report from the international meeting printed in its entirety
***Morača S., Radaković N., Šević D.: Uvođenje i primena standarda - osnova razvoja složenih organizacionih sistema tipa klastera, Menadžment totalnim kvalitetom i izvrsnost, 2008, Vol. 36, No 4, pp. 75-78, ISSN 1452-0680- <u>Nije povezan skup</u><font style="color:#b3b300;">**greska**</font> , UDK: 658.5
() Report from the international meeting printed in its entirety
Beker I., Šević D., Bojanić D., Sabo G.: Istraživanje mogućnosti uvođenja povratne logistike u preduzeće "Neopet", Novi Sad Naziv skupa: XIV Naučna konferencija INDUSTRIJSKI SISTEMI IS "08 , International Journal of Industrial Engineering and Management, 2008, pp. 369-372, ISSN 2217-2661, 14. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Fakultet tehničkih nauka, 2-3 Oktobar, 2008, pp. 369-372, ISBN 978-86-7892-135-3, UDK: 685.5(082)
() Report from the international meeting printed in its entirety
Vulanović S., Morača S., Šević D.: Uporedni pregled zahteva specifikacije OHSAS 18001:1999 i standarda OHSAS 18001:2007, International Journal of Industrial Engineering and Management, 2008, pp. 349-354, ISSN 2217-2661, 14. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Fakultet tehničkih nauka, 2-3 Oktobar, 2008, pp. 349-354, ISBN 978-86-7892-135-3, UDK: 685.5(082)
() Report from the international meeting printed in its entirety
Ćosić J., Šević D., Ušćebrka G.: Implementacija integrisanog sistema menadžmenta u „VICTORIAOIL“ Šid, International Journal Total Quality Management & Excellence, 2010, Vol. 38, No 4, pp. 27-33, ISSN 1452-0680- <u>Nije povezan skup</u><font style="color:#b3b300;">**greska**</font> , UDK: 005.6
() Report from the international meeting printed in its entirety
Šević D., Ušćebrka G., Žikić D., Brkljač N.: MODEL VREDNOVANJA ZNAČAJNOSTI UTICAJA NA ŽIVOTNU SREDINU SA STANOVNIŠTVA ZAHTEVA STANDARDA ISO 14001:2004, 8. Evropska nedelja kvaliteta - JUSK EQW, Novi Sad: JUSK, 9-11 Novembar, 2011, pp. 48-51, UDK: 658.5
() Report from the international meeting printed in its entirety
Marić A., Šević D., Đorđević Lj.: The effect of cylindric evolving gears profile displacement on power transmission; Proceedings of 7th INTERNATIONAL SCIENTIFIC CONFERENCE, Research and development of Mechanical elements and systems, IRMES 2011., Zlatibor, Serbia, 27th & 28th of April 2011., 7. IRMES-Naučno-stručni skup Istraživanje i razvoj mašinskih elemenata i sistema, Zlatibor, 27-28 April, 2011, pp. 46-53, ISBN 978-86-6055-012-7
() Report from the international meeting printed in its entirety
Šević D.: Prednost postojanja laboratorije za ispitivanje u procesu implementacije HACCP sistema u mlinarskoj industriji u cilju proiyvodnje konkurentnih prehrambenih proizvoda, 1. International Convention on Quality - ICQ, Beograd: JUSK, 6-9 Jun, 2011, pp. 137-140, ISBN 978-86-903-197-6-3, UDK: 658.5
() Report from the international meeting printed in its entirety
Milisavljević S., Mirković M., Šević D., Mitrović Veljković S.: Business quality improvement by using e-services for customer relationship management, 6. International Working Conference "Total Quality Management - Advanced and Intelligent Approaches" - TQM & AIA, Beograd, 6-10 Jun, 2011, pp. 316-319, ISBN 978-86-7083-727-0
() Report from the international meeting printed in its entirety
Beker I., Lazarević M., Šević D., Radlovački V.: What is the best way to teach lean, 1. International Scientific Conference on Lean Technologies (LeanTech), Novi Sad: FTN, Novi Sad, 13-14 Septembar, 2012, pp. 121-126, ISBN 978-86-7892-445-3, UDK: 62-05(082)
() Report from the international meeting printed in its entirety
Ušćebrka G., Žikić D., Šević D., Ćosić J., Stojanović S.: Agroindustry and quality management in Serbia, 7. International Conference ICQME (Quality, Management, Environment, Education, Engineering), Tivat: JUSK, 19-21 Septembar, 2012, pp. 122-127, ISBN 978-86-903197-9-4, UDK: 658.5
() Report from the international meeting printed in its entirety
Đorđević A., Vuković M.: EMAS I/ILI ISO 14001, 18. European Quality Week in Serbia, Novi Sad: UASQ - United Association of Serbia for Quality, Belgrade, SERBIA., 18-20 Novembar, 2014, pp. 46-50, ISBN 978-86-89157-01-7, UDK: 658.5
() Report from the international meeting printed in its entirety
Morača S., Fajsi A., Beker I., Šević D.: Eco-design as a technique in achieving product lifecycle sustanability, 12. INTERNATIONAL SCIENTIFIC CONFERENCE MMA 2015 - FLEXIBLE TECHNOLOGIES, Novi Sad: FACULTY OF TECHNICAL SCIENCES DEPARTMANT OF PRODUCTION ENGINEERING 21000 NOVI SAD, Trg Dositeja Obradovica 6 SERBIA, 25-26 Septembar, 2017, pp. 215-218, ISBN 978-86-7892-722-5
() Report from the international meeting printed in its entirety
Beker I., Čerepnalkovska S., Šević D., Kamberović B.: Procedure for KPI Definition , 17. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Fakultet tehničkih nauka, Novi Sad, 4-6 Oktobar, 2017, pp. 288-291, ISBN 978-86-7892-978-6 , UDK: 658.5(082)
() Report from the international meeting printed in its entirety
Alkher M., Beker I., Čabarkapa V., Šević D.: Most Used Lean Tools in Hospitals and Clinical Laboratories, 17. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Fakultet tehničkih nauka, Novi Sad, 4-6 Oktobar, 2017, pp. 278-283, ISBN 978-86-7892-978-6 , UDK: 658.5(082)
() Report from the international meeting printed in its entirety
Brkljač N., Milisavljević S., Delić M., Beker I., Šević D.: Reverse logistics implementation barriers in organizations on the territory of AP Vojvodina, 17. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department of Industrial Engineering and Engineering Management, 4-6 Oktobar, 2017, pp. 292-297, ISBN 978-86-7892-978-6
() Report from the international meeting printed in its entirety
Milisavljević S., Šević D., Mitrović Veljković S., Vrhovac V., Peković T.: Uticaj upravljanja odnosima sa korisnicima na održivost efektivnog i efikasnog IMS, 14. International Convention on Quality - ICQ, Beograd: UASQ-United association of serbia for Quality, 5-7 Jun, 2017, pp. 83-86, UDK: 005,9:001.895
() Monographic bibliographic publication
Beker I., Morača S., Tešić Z., Šević D., Rikalović A., Radlovački V.: LEAN SISTEM, Novi Sad, Univerzitet u Novom Sadu, Fakultet tehničkih nauka, 2017, ISBN 978-86-7892-856-7
() Research published in the scientific journal
Prokopić L., Šević D., Milisavljević S.: Prednosti integrisanog sistema menadžmenta u procesnoj industriji, International Journal Total Quality Management & Excellence, 2008, Vol. 36, No 1, ISSN 1452-0680, UDK: 658.5
() Research published in the scientific journal
Šević D.: Proveravanje sistem upravljanja bezbednošću hrane - minimalni zahtevi, International Journal Total Quality Management & Excellence, 2008, Vol. 36, No 1-2, pp. 347-350, ISSN 1452-0680, UDK: 658.5
() Research published in the scientific journal
Milisavljević S., Šević D., Ćelić Đ.: Mesto logistike u QMS-u i savremene tendencije, International Journal Total Quality Management & Excellence, 2009, Vol. 37, No 3-4, pp. 89-92, ISSN 1452-0680, UDK: 658.5
() Research published in the scientific journal
Šević D., Ušćebrka G., Milisavljević S.: Sistem upravljanja zaštitom životne sredine u poljoprivrednom gazdinstvu, International Journal Total Quality Management & Excellence, 2009, Vol. 37, No 1-2, pp. 145-148, ISSN 1452-0680, UDK: 658.5
() Research published in the scientific journal
Brkljač N., Šević D., Marić A.: Prilog menadžmentu logistike prekograničnog kretanja opasnog otpada na primeru organizacije iz Srbije, IMK 14- Istraživanje i razvoj, časopis Instituta IMK »14 oktobar», Kruševac, 2011, Vol. 17, No 3, pp. 49-54, ISSN 0354 6829, UDK: 621
() Research published in the scientific journal
Ušćebrka G., Žikić D., Stojanović S., Kanački Z., Šević D.: Zahtevi EU i Globalgap-a u pogledu postupka sa nus-proizvodima u poljoprivredi, Tehnika - Kvalitet, standardizacija i metrologija, 2009, Vol. 9, No 3, pp. 21-24, ISSN 1450-989X, UDK: 631.164.27=861
() Research published in the scientific journal
Ušćebrka G., Žikić D., Stojanović S., Kanački Z., Šević D.: Zahtevi EU i GlobalGAP-a u pogledu postupaka sa nus-proizvodima, International Journal Total Quality Management
() Research published in the scientific journal
Ušćebrka G., Šević D.: Integrisani sistemi i standardi kvaliteta u poljoprivredi i prehrambenoj industriji - zakonska obaveza, potreba ili nešto treće, International Journal Total Quality Management
() Research published in the scientific journal
Ušćebrka G., Žikić D., Stojanović S., Šević D.: Poljoprivredno-prehrambena industrija u Srbiji i njena dobra praksa kvaliteta. , International Journal Total Quality Management
() Research published in the scientific journal
Šević D., Milisavljević S., Kesić I.: Procesna industrija versus ISO 14001, International Journal Total Quality Management
() Research published in the scientific journal
Šević D.: Preduslovi za sertifikaciju poljoprivredno prehrambenih proizvoda sa aspekta sistema i standarda kvaliteta, International Journal Total Quality Management
() Research published in the scientific journal
Prokopić L., Šević D., Tomšik J.: Stečena iskustva u realizaciji projekta implementacije HACCP sistema u pogonu za proizvodnju trajnog peciva i ostalih pekarskih proizvoda u pekari „Anna bakehouse“ – Selenča, International Journal Total Quality Management
() Research published in the scientific journal
Šević D., Beker I., Milisavljević S.: Uporedna analiza zahteva standarda ISO 14001:2004 i standarda ISO 14001:1996, International Journal Total Quality Management
() Research published in the scientific journal
Stefanović N., Šević D.: Modeliranje poslovnih procesa korišćenjem Workflow menadžment sistema, International Journal Total Quality Management
() Research published in the scientific journal
Šević D., Delić M., Brkljač N., Vulanović S.: Enviromental management system as the basis of integrated management system - possibility, advantage or necessity, Advanced Quality: international journal, 2016, Vol. 44, No 4, pp. 49-52, ISSN 2217-8155, UDK: 658.5
() Research published in the scientific journal
Šević D., Stefanović N., Prokopić L.: Upotreba podataka i informacija koji se odnose na vrednovanje učinka na zaštiti životne sredine, International Journal Total Quality Management
() Report from the meeting of the national importance printed in its entirety
Beker I., Stanivuković D., Šević D.: Postupak za ocenu uspešnosti održavanja , 26. Majski skup održavalaca Jugoslavije, Novi Sad: Fakulte tehničkih nauka, 1 Maj, 2002, str. 87-93, UDK: 621-772
() Report from the meeting of the national importance printed in its entirety
Katić A., Katić (Drezgić) I., Šević D., Lalić B., Bogojević B.: Platforma za učenje na daljinu ellab u funkciji realizacije stručne studentske prakse na Fakultetu tehničkih nauka, 22. Trendovi razvoja TREND, Zlatibor: Fakultet tehnickih nauka, 16-19 Februar, 2016, pp. 261-264, ISBN 978-86-7892-795-9
() Report from the meeting of the national importance printed in its entirety
Šević D., Beker I.: Zahtevi standarda ISO 9000:2000 i njihova primena u održavanju, 26. Majski skup održavalaca Jugoslavije, Novi Sad, 1 Maj, 2002, pp. 93-102, UDK: 621-772
() Report from the meeting of the national importance printed in its entirety
Šević D., Brkljač N., Milisavljević S., Tasić N., Peković T.: Uticaj procesa samovrednovanja visokoškolske ustanove na već uspostavljeni IMS, 14. International Convention on Quality - ICQ, Beograd: UASQ-United Association of Serbia for Quality, Belgrade, Serbia., 5-7 Jun, 2017, pp. 97-101, ISBN 978-86-89157-09-3, UDK: 006.3;005.6
() Report from the meeting of the national importance printed in its entirety
Lalić B., Simeunović N., Tasić N., Bogojević B., Šević D., Stefanović D.: Sistematski prilaz definisanja kompetencija studenata kao osnova u postupku razvoja i akreditacije studijskih programa, 23. Trendovi razvoja TREND, Zlatibor: Fakultet tehničkih nauka, Univerzitet u Novom Sadu, 22-24 Februar, 2017, pp. 154-157, ISBN 978-86-7892-904-5
() Report from the meeting of the national importance printed in its entirety
Beker I., Milisavljević S., Šević D., Radlovački V., Delić M., Brkljač N.: Spremnost privrede Vojvodine za kompeticiju sa privredom Evropske Unije, 4. Konkurentnost i održivi razvoj– KOR 2015, Novi Sad: BSC Informativni centar za poslovnu standardizaciju i sertifikaciju, 7-8 Oktobar, 2015, pp. 103-107, ISBN 2335-0172
() Report from the meeting of the national importance printed in its entirety
Brkljač N., Šević D., Milisavljević S., Peković T.: Pogodnost integracije sistema menadžmenta energijom i sistema upravljanja zaštitom životne sredine saglasno zahtevima međunarodnih standarda EN ISO 50001:2011 I ISO 14001:2015, 12. Evropska nedelja kvaliteta - JUSK EQW, Novi Sad: UASQ - United Association of Serbia for Quality, Belgrade, SERBIA., 19-20 Novembar, 2015, pp. 67-70, ISBN 978-86-89157-05-5, UDK: 006.06
() Report from the meeting of the national importance printed in its entirety
Milisavljević S., Beker I., Šević D., Radlovački V., Delić M., Brkljač N.: Kvalitet kao mera spremnosti privrede Vojvodine za kompeticiju sa privredom Evropske unije, 12. Evropska nedelja kvaliteta - JUSK EQW, Novi Sad: UASQ - United Association of Serbia for Quality, Belgrade, SERBIA., 19-20 Novembar, 2015, pp. 59-62, ISBN 978-86-89157-05-5, UDK: 658.5
() Report from the meeting of the national importance printed in its entirety
Đorđević A., Vuković M., Šević D.: EMAS I/ILI ISO 14001, 18. European Quality Week in Serbia, Novi Sad: UASQ - United Association of Serbia for Quality, Belgrade, SERBIA., 18-20 Novembar, 2014, pp. 46-50, ISBN 978-86-89157-01-7, UDK: 658.5
() Report from the meeting of the national importance printed in its entirety
Vuković M., Vulanović S., Brkljač N., Delić M., Šević D.: ALATI KVALITETA U AUTOMOBILSKOJ INDUSTRIJI, 9. International Convention on Quality, Beograd: Jedinstveno udruženje Srbije za kvalitet, 2-5 Jun, 2014, ISBN 978-86-89157-02-4, UDK: 330.546:338.45,355.424.5
() Report from the meeting of the national importance printed in its entirety
Brkljač N., Vuković M., Vulanović S., Kesić I., Šević D.: USPOSTAVLJANJE SISTEMA UPRAVLJANJA ENERGIJOM U INDUSTRIJSKIM SISTEMIMA, SAGLASNO ZAHTEVIMA STANDARDA ISO 50001:2011 I KORISTI OD PRIMENE, 9. International Convention on Quality, Beograd: Jedinstveno udruženje Srbije za kvalitet, 2-5 Jun, 2014, ISBN 978-86-89157-02-4, UDK: 006.35, 334.71, 502.21
() Report from the meeting of the national importance printed in its entirety
Šević D., Marić A., Brkljač N., Vuković M., Đorđević A.: PROBLEMI SPECIFIČNI ZA PROCES RUKOVANJA, PAKOVANJA I SKLADIŠTENJA I KAKO IH IZBEĆI, 18. European Quality Week in Serbia, Novi Sad: UASQ - United Association of Serbia for Quality, Belgrade, SERBIA., 18-20 Novembar, 2014, pp. 51-53, ISBN 978-86-89157-01-7, UDK: 658.5
() Report from the meeting of the national importance printed in its entirety
Šević D., Beker I., Brkljač N., Kesić I.: Generički model analize uzročnika problema neodvijanja definisanih procesa preduzeća sa načinom njihovih prevazilaženja, 9. Evropska nedelja kvaliteta - JUSK EQW, Novi Sad: JUSK, 14-15 Novembar, 2012, pp. 58-64
() Report from the meeting of the national importance printed in its entirety
Vulanović S., Brkljač N., Kesić I., Šević D.: Okvir za integraciju standarda ISO 50001 u postojeći sistem menadžmenta, 9. Evropska nedelja kvaliteta - JUSK EQW, Novi Sad, 14-15 Novembar, 2012
() Report from the meeting of the national importance printed in its entirety
Šević D., Ušćebrka G., Žikić D., Brkljač N.: Model vrednovanja značajnosti uticaja na životnu sredinu sa stanovišta zahteva standarda ISO 14001:2004, 8. Evropska nedelja kvaliteta - JUSK EQW, Novi Sad: Jedinstveno udruženje Srbije za kvalitet, 9-11 Novembar, 2011, pp. 48-51
() Report from the meeting of the national importance printed in extracts
Žikić D., Šević D., Ćosić J., Ušćebrka G.: IMPLEMENTACIJA GMP STANDARDA U VICTORIAOIL– ŠID, UDK: 658.5
() Report from the meeting of the national importance printed in extracts
Ušćebrka G., Stojanović S., Žikić D., Kanački Z., Šević D.: Preduslovni programi kao deo integrisanog sistema kvaliteta u cilju obezbeđenja zdravstveno bezbednog proizvoda. “European Quality Week 2011 in Serbia”, 9th – 11th, November 2011, Novi Sad
() Defended Doctoral dissertation
RAZVOJ MODELA UPRAVLJANJA LOGISTIČKIM PROCESIMA NA BAZI PROCESNOG PRILAZA, ODRŽIVOG RAZVOJA I SISTEMA UPRAVLJANJA ZAŠTITOM ŽIVOTNE SREDINE
() Defended Magister thesis
RAZVOJ MODELA INTEGRALNOG SISTEMA, Novi Sad, 2004
() Prototype, new methods, software, standardized and certified instrument
Vulanović S., Morača S., Kamberović B., Radlovački V., Beker I., Šević D., Milisavljević S., Delić M., Brkljač N.: ITC metoda procene rizika na radnom mestu i u radnoj okolini, 2016
() Additional textbook for the course
mr Dragoljub Šević, dr Bato Kamberović, mr Miodrag Šilobad; ISO 14001 * kako zadovoljiti zahteve, Novi Sad, 2005.
() Additional textbook for the course
INTERNE PROVERE *PROVERAVANJE SISTEMA MENADŽMENTA KVALITETOM I/ILI SISTEMA UPRAVLJANJA ZAŠTITOM ŽIVOTNE SREDINE, Novi Sad, Septembar, 2005.
