Marko Orošnjak je rođen 22.juna.1989 u Sremskoj Mitrovici. Osnovnu školu "Zmaj Jova Jovanović" i Srednju tehničku školu "Milenko Brzak Uča" završava u Rumi.
Na Fakultet Tehničkih Nauka upisuje se 2010. godine na smer Industrijsko Inženjerstvo. Diplomski rad pod naslovom "Proračun i konstrukcija hidraulične platforme za kipovanje transportnih sredstava sa rastresitim teretom" odbranio je sa prosečnom ocenom 10 (deset) u oktobru 2014. godine. Iste godine se upisuje na Master akademske studije i završava u predviđenom roku sa prosečnom ocenom 9.55 (devet i 55/100) sa odbranjenom Master tezom "Razvoj indikatora uspešnosti održavanja hidrauličnih sistema na osnovu triboloških parametara" u oktobru 2015. godine sa ocenom 10 (deset).
Na Fakultet Tehničkih Nauka zapošljava se 2015. godine kao saradnik u nastavi na smeru Industrijsko Inženjerstvo, na katedri za kvalitet, efektivnost i logistiku. Osim na smeru Industrijsko Inženjerstvo nastavu drži na Inženjerskom Menadžmentu, Inženjerstvu Informacionih Sistema i Mehatronici. Trenutno je na Doktorskim studijama na smeru Industrijsko Inženjerstvo i Menadžment. Do sada je objavio više naučnih radova i učestvovao na više međunarodnih naučnih konferencija. Poseduje više sertifikata koji se tiču sistema menadžmenta kvalitetom. Do sada je bio angažovan na predmetima Procesi i sredstva rada, Tribologija i podmazivanje, Automatizacija procesa rada 1 (deo hidraulika), Komponente Tehnoloških Sistema (deo hidraulika), Sistem Menadžmenta Kvalitetom, Metode i tehnika unapređenja sistema kvaliteta, Tehnologije merenja i kontrole proizvoda. Dobitnik stipendija Ministarstva nauke i tehnološkog razvoja, dobitnik stipendije opštine Ruma za najbolje studente, dobitnik stipendije firme FESTO za DAAAM doktorsku školu u Mostaru, BiH 2016". Predstavnik Univerziteta u Novom Sadu na forumu inženjera "Engineers of the future 2018" Ulyanovsk, Russia; organizovane od strane kompanije Rostek i Ruske inženjerske komore.
(M21a) Rad u međunarodnom časopisu izuzetnih vrednosti
Orošnjak M., Jocanović M., Čavić M., Karanović V., Penčić M.: Industrial Maintenance 4(.0) Horizon Europe: Consequences of the Iron Curtain and Energy-Based Maintenance, Journal of Cleaner Production, 2021, Vol. 314, pp. 1-16, ISSN 0959-6526
(M22) Rad u istaknutom međunarodnom časopisu
Duđak Lj., Milisavljević S., Jocanović M., Kiš (Kiss) F., Šević D., Karanović V., Orošnjak M.: Life Cycle Assessment of Different Waste Lubrication Oil Management Options in Serbia, Applied Sciences, 2021, ISSN 2076-3417
(M22) Rad u istaknutom međunarodnom časopisu
Jocanović M., Agarski B., Karanović V., Orošnjak M., Ilić Mićunović M., Ostojić G., Stankovski S.: LCA/LCC Model for Evaluation of Pump Units in Water Distribution Systems, Symmetry, 2019, Vol. 11, No. 9, pp. 1-21, ISSN 2073-8994
(M23) Rad u međunarodnom časopisu
Orošnjak M., Jocanović M., Gvozdenac Urošević B., Šević D., Duđak Lj., Karanović V.: Bus Fleet Management: A Systematic Literature Review, Promet - Traffic and Transportation, 2020, Vol. 32, No. 6, pp. 761-772, ISSN 0353-5320
(M23) Rad u međunarodnom časopisu
Čavić M., Penčić M., Oros D., Čavić D., Orošnjak M., Rackov M.: High-Capacity Stacking Apparatus for Thermoforming Machine – Part I: Synthesis of Intermittent Mechanisms as Stacker Driving Units, Advances in Mechanical Engineering, 2021, Vol. 13, No. 8, pp. 1-18, ISSN 1687-8140, UDK: DOI: 10.1177/16878140211040892
(M23) Rad u međunarodnom časopisu
Penčić M., Čavić M., Oros D., Čavić D., Orošnjak M., Karanović V.: High-Capacity Stacking Apparatus for Thermoforming Machine – Part II: Structural Design of the Adjustable Stacker Driving Mechanism, Advances in Mechanical Engineering, 2021, Vol. 13, No. 10, pp. 1-19, ISSN 1687-8140, UDK: DOI: 10.1177/16878140211052458
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Jocanović, M., Karanović, V., Knežević, D., Orošnjak, M., „Model for monitoring of the physical and chemical characteristics of the oil filling in hydraulic systems“, 12th International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology – DEMI 2015, Faculty of Mechanical Engineering University of Banja Luka
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Žižakov M., Vasić S., Delić M., Orošnjak M., Vulanović S.: The Interdependencies of Quality Management, Knowledge Management and Innovation Performance. A Literature Review, IFIP Advances in Information and Communication Technology, 2020, Vol. 591, pp. 575-582, ISSN 1868-4238, 25. Advances in Production Management Systems (APMS), Novi Sad: Springer, Cham, 30-3 August, 2020, pp. 575-582, ISBN 978-3-030-57992-0
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Orošnjak M., "Conceptual model of contributive factors important in mass customization application: Theoretical viewpoint", 7th International Conference on Mass Customization and Personalization in Central Europe, Septembar 21-23, Faculty of Technical Sciences, University of Novi Sad, Serbia
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Vekić A., Orošnjak M., Ćosić M., "Use of Banking Machines in the Payment System of the Republic of Serbia as a Personalization Model for Banking Services", 7th International Conference on Mass Customization and Personalization in Central Europe, Septembar 21-23, Faculty of Technical Sciences, University of Novi Sad, Serbia
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Orošnjak M., Jocanović, M., Karanović, V. "Quality Analysis of Hydraulic Systems in Function of Reliability Theory" 27th DAAAM International Symposium on Intelligent Manufacturing and Automation, October 26-29, 2016, Mostar, BiH
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Jocanović M., Karanović V., Orošnjak M., Nikolić N., Knežević D.: Lubricating oils for modern automatic transmission of motor vehicles, 3. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina, 7-9 Decembar, 2016, pp. 451-456, ISBN 978-99976-623-7
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Orošnjak M., Jocanović M., Karanović V.: Simulating the effects that contamination has on a hydraulic system performance using MATLAB/SimHydraulics, 3. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina, 7-9 Decembar, 2016, pp. 457-464, ISBN 978-99976-623-7-8
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Karanović V., Jocanović M., Orošnjak M.: Active tribology systems, 15. International Conference on Tribology - SERBIATRIB, Kragujevac: University of Kragujevac, Faculty of Engineering and Serbian Tribology Society, 17-19 Maj, 2017, pp. 378-381, ISBN 978-86-6335-041-0, UDK: 621.89(082); 531.43(082); 66.017/018:539.375.6(082); 577.38(082); 612.766(082)
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Karanović V., Jocanović M., Nikolić N., Lubich M., Orošnjak M.: Lubricating Oils for Automotive Natural Gas Engines, 13. International Conference on Accomplishments in Mechanical and Industrial Engineering - DEMI, Banja Luka: University of Banja Luka, Faculty of Mechanical Engineering, 26-27 Maj, 2017, pp. 847-854, ISBN 978-99938-39-72-9, UDK: 621.3(082)(0.034.2); 621(082)(0.034.2); 004(082)(0.034.2);
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Jocanović M., Karanović V., Knežević D., Orošnjak M., Laloš S.: Significance of hydraulic system working fluid maintenance with integrated logic and built-in components, 13. International Conference on Accomplishments in Mechanical and Industrial Engineering - DEMI, Banja Luka: University of Banja Luka, Faculty of Mechanical Engineering, 26-27 Maj, 2017, pp. 855-862, UDK: 621.3(082)(0.034.2); 621(082)(0.034.2); 004(082)(0.034.2)
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Orošnjak M., Peković T., Jocanović M., Karanović V., Novak Horvatić A.: Using contamination control in condition based maintenance of a hydraulic system, 42. Scientific Conference Maintenance of Machinery and Equipment - OMO, Budva, 24-27 Maj, 2017, pp. 102-111
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Orošnjak M., Karanović V., Horvatić Novak A., Peković T., Jocanović M.: Maintenance of a hydraulic system through oil monitoring and contamination control, 16. International Scientific Conference on Production Engineering - CIM, Zadar: Croatian Association of Production Engineering, 8-10 Jun, 2017, pp. 195-202, ISBN 2584-3214
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Karanović V., Jocanović M., Orošnjak M.: Condition Monitoring of Hydraulic Machinery by Oil Analysis, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad: University of Novi Sad, Faculty of Novi Sad, 8-10 Jun, 2017, ISBN 978-86-7892-934-2, UDK: 62(082)
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Jocanović M., Karanović V., Tič V., Orošnjak M., Selinić D.: Application of hydraulic and gear oils in the food processing industry, Fluidna tehnika, 2017, ISSN 0353-6114, 3. Fluid Power, Maribor: University of Maribor, Faculty of Mechanical Engineering, 14-15 Septembar, 2017, ISBN 978-961-248-176-6, UDK: 621.51/.54(063)(082)
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Orošnjak M., Jocanović M., Karanović V.: Simulation and Modeling of a Hydraulic System in FluidSim, 17. International Scientific Conference on Industrial Systems, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department for Industrial Engineering and Management, 4-6 Oktobar, 2017, pp. 50-53, ISBN ISBN 978-86-7892-978, UDK: 658.5(082)
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Runje B., Horvatić Novak A., Orošnjak M., Belošević A.: Influence of surface determination on CT measurement results, 20. International Conference MATRIB, Vela Luka, 27-29 Jun, 2018
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Karanović V., Jocanović M., Wakiru J., Orošnjak M.: Benefits of lubricant oil analysis for maintenance decision support: A case study, 10. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Novi Sad: Faculty of Technical Sciences, 6-8 Jun, 2018
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Wakiru J., Pintelon L., Karanović V., Jocanović M., Orošnjak M.: Analysis of lubrication oil towards maintenance grouping for multiple equipment using fuzzy cluster analysis, 10. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Novi Sad: Faculty of Technical Sciences, 6-8 Jun, 2018
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Orošnjak M., Jocanović M., Karanović V., Wakiru J., Bugarić U.: Contamination control of hydraulic systems in Industry 4.0, 3. Maintenance Forum on Maintenance and Asset Management, Beograd, 24-26 Maj, 2018, pp. 52-60, ISBN 978-86-84231-43-9
(M51) Rad u vodećem časopisu nacionalnog značaja
Jocanović M., Karanović V., Knežević D., Orošnjak M.: Diesel fuel filtration problems with modern common rail injection systems, Vojnotehnički glasnik, 2017, Vol. 4, No 65, pp. 968-993, ISSN 0042-8469, UDK: 623+355 / 359 355 / 359
(M53) Rad u naučnom časopisu
Orošnjak M., Jocanović M., Karanović V., Vekić A., Medić N.: Transformation from mass production to mass customization in SCM: Obstacles and advantages, Acta Technica Corviniensis, 2017, Vol. 10, No 1, pp. 29-33, ISSN 2067-3809, UDK: http://acta.fih.upt.ro/pdf/2017-1/ACTA-2017-1-03
(M53) Rad u naučnom časopisu
Orošnjak, M., Jocanović, M., Karanović, V., Vekić, A., Medić, N.: Transformation from mass production to mass customization in SCM: Obstacles and advantages, Acta Technica Corviniensis, 2017, Vol. 10, No 1, pp. 29-33, ISSN 2067-3809.
(M53) Rad u naučnom časopisu
Orošnjak M.: Indicator development for maintaining hydraulic systems based on tribological parameters, UNS FTN - Zbornik radova Fakulteta Tehničkih Nauka, 2015, Vol. 16, No 12, pp. 3025-3029
(M53) Rad u naučnom časopisu
Orošnjak M., Jocanović, M., Karanović, V.: Applying contamination control for improved prognostics and health management of hydraulic systems, International Journal of Condition Monitoring and Diagnostic Engineering Management, 2021, Vol. 24, No. 1, pp. 33-38, ISSN 1363-7681
(M53) Rad u naučnom časopisu
Horvatić Novak A., Runje B., Keran Z., Orošnjak M.: Image Artefacts in Industrial Computed Tomography, Tehnički Glasnik - Technical Journal, 2020, Vol. 14, No. 4, pp. 434-439, ISSN 1848-5588
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celini
Vrhovac V., Orošnjak M., Cvetković N., Žižakov M., Nikolić D.: Nove tehmologije učenja u visokom obrazovanju, 23. Trendovi razvoja TREND, Zlatibor: Fakultet tehničkih nauka Univreziteta u Novom Sadu, 22-24 Februar, 2017, pp. 73-76, ISBN 978-86-7892-904-5
(M64) Saopštenje sa skupa nacionalnog značaja štampano u izvodu
Orošnjak M., Vrhovac V., Žižakov M., Peković T.: Maintenance against innovation: Who encapsulates who?, 24. Trendovi razvoja - TREND, Kopaonik: Faculty of Technical Sciences, University of Novi Sad, 21-23 Februar, 2018, pp. 293-295, ISBN 978-86-6022-031-0, UDK: 378:004(497.11)(082)
