Rođen 1984. godine u Nišu, Republika Srbija. Osnovnu i srednju Tehničku školu završava u Bečeju. Fakultet tehničkih nauka u Novom Sadu upisuje 2003. godine, smer za Industrijske sisteme i diplomira 2008. godine kao student sa najvišom prosečnom ocenom u svojoj generaciji na Departmanu za Industrijsko inženjerstvo i menadžment. Te 2008. godine završava integrisane osnovne i master studije sa Master radom na temu: Razvoj multifunkcijskih proizvoda i upisuje doktorske studije na Fakuletu tehničkih nauka u Novom Sadu. Tokom doktorskih studija, izvodi nastavu na predmetima: Proizvodni i uslužni sistemi, Proizvodne strategije (LEAN, Kaizen), Tehnološka i poslovna predviđanja, Razvoj i projektovanje proizvoda. Takođe, autor ili koautor je monografskog poglavlja u knjizi, osam radova u istaknutim međunarodnim časopisima i ukupno na preko 60 naučnih radova. Doktorsku disertaciiju piše na temu: Razvoj konfiguratora složenih proizvoda primenom postupka grupisanja i istu prezentuje i odbranjuje septembra 2016. godine. Trenutno je u zvanju vanrednog profesora na Fakultetu tehničkih nauka, Univerziteta u Novom Sadu i aktivno radi na daljem razvoju svoje akademske i istraživačke karijere.
(M14) Monografska studija/poglavlje u knjizi M12 ili rad u tematskom zborniku međunarodnog značaja
Lazarević M., Lazarević Đ., Suzić N., Sremčev N., Rikalović A.: PERSPECTIVES OF INTRODUCING THE RFID TECHNOLOGIES IN PLM, Novi Sad, Faculty of Technical Sciences; Vienna: DAAAM International; Stuttgart: Fraunhofer IAO, 2013, str. 171-194, ISBN 978-3-902734-00-6
(M22) Rad u istaknutom međunarodnom časopisu
Pervaz J., Sremčev N., Stevanov B., Gusel L.: Simulation-Based Algorithm for Continuous Improvement of Enterprises Performance , International Journal of Simulation Modelling, 2024, Vol. 23, No. 2, ISSN 1726-4529
(M22) Rad u istaknutom međunarodnom časopisu
Stevanov B., Sremčev N., Lazarević M., Anderla A., Sladojević S., Vidicki P.: Optimization of the Subassembly Production Process Using Simulation, International Journal of Simulation Modelling, 2022, Vol. 21, No. 4, pp. 663-674, ISSN 1726-4529
(M22) Rad u istaknutom međunarodnom časopisu
Sremčev N., Stevanov B., Lazarević M., Mandić J., Tešić Z., Kuzmanović B.: Improving Process of Quotation Creation Through Value Stream Mapping and Simulation, International Journal of Simulation Modelling, 2019, Vol. 18, No 4, ISSN 1726-4529
(M22) Rad u istaknutom međunarodnom časopisu
Anišić Z., Veža I., Suzić N., Sremčev N., Orčik A.: Improving product design with IPS-DFX methodology incorporated in PLM software, Tehnicki vjesnik - Technical Gazette, 2013, pp. 183-193, ISSN 1330-3651
(M22) Rad u istaknutom međunarodnom časopisu
Suzić N., Stevanov B., Ćosić I., Anišić Z., Sremčev N.: Customizing Products trough Application of Group Technology: A Case Study of Furniture Manufacturing, Strojniski vestnik = Journal of Mechanical Engineering, 2012, ISSN 0039-2480
(M23) Rad u međunarodnom časopisu
Popović Lj., Sremčev N., Purković D., Ćosić I.: Chemical Engineering in Technical and Technological Culture, Journal of the Serbian Chemical Society, 2024, ISSN 0352-5139
(M23) Rad u međunarodnom časopisu
Lazarević M., Mandić J., Sremčev N., Vukelić Đ., Debevec M.: A systematic literature review of Poka-Yoke and novel approach to theoretical aspects, Strojniski vestnik - Journal of Mechanical Engineering, 2019, Vol. 65, No 7-8, pp. 454-467, ISSN 0039-2480
(M23) Rad u međunarodnom časopisu
Lazarević M., Vukelić Đ., Stankovski S., Sremčev N., Ostojić G.: Enhancing Student Competence through Novel Student Enterprise Concept, International Journal of Engineering Education, 2017, Vol. 33, No 6(A), pp. 1824-1833, ISSN 0949-149X
(M24) Rad u časopisu međunarodnog značaja verifikovanog posebnom odlukom
Klašnja N., Sremčev N., Vukelić Đ., Simeunović N., Lazarević M.: Optimization of Cable Harness Assembly Systems Based on Lean Concept Application, International Journal of Industrial Engineering and Management, 2019, Vol. 10, No. 1, pp. 115-123, ISSN 2217-2661
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Anišić Z., Firstner (Fürstner) I., Nađ A., Sremčev N., Gogolak L.: Development of Improved Weel Hub Prototype Through Idealab Platform for Students's Contest, 9. The 9th International Symposium - KOD 2016 - Machine and Industrial Design in Mechanical Engineering, Balatonfured: Univerzitet u Novom Sadu, Fakultet tehničkih nauka, 9-12 Jun, 2016, pp. 23-28, ISBN 978-86-7892-821-5
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Lazarević M., Ćosić I., Vukelić Đ., Sremčev N., Bajčeta D.: Traceability of machining cutting tools and fixtures in the production system using the RFID technology, 26. DAAAM International Symposium, Zadar: DAAAM International, 21-24 Oktobar, 2015, pp. 415-422, ISBN 978-3-902734-05-1
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Pervaz J., Ćosić I., Šormaz D., Lazarević M., Simeunović N., Sremčev N.: Application of Group Technology in a Production of Cardboard Packaging and Printed Papers, 30. DAAAM International Symposium on Intelligent Manufacturing and Automation, Zadar: DAAAM International, 23-26 Oktobar, 2019, pp. 348-352, ISBN 978-3-902734-22-8
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Sremčev N., Ćosić I., Anišić Z., Lazarević M., Gechevska V.: Procedure phases for configuration system development, 26. DAAAM International Symposium, Zadar: Danube Adria Association for Automation and Manufacturing, DAAAM, 21-24 Oktobar, 2015, pp. 478-482, ISBN 978-390273407-5, UDK: ISSN: 17269679
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Sremčev N., Lazarević Đ., Ćosić I., Lazarević M., Rikalović A.: IMPROVEMENT OF MATERIAL FLOW IN SYSTEM FOR MANUFACTURING OF COOLING AND COOKING DEVICES, 6. International Symposium on Industrial Engineering (SIE), Beograd: Faculty of Mechanical Engineering, 24-25 Septembar, 2015, pp. 304-307, ISBN 978-86-7083-864-2
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Rikalović A., Ćosić I., Lazarević M., Sremčev N., Bajić B.: Machine Learning Techniques for Smart Manufacturing: Applications and Challenges in Industry 4.0, 9. International Scientific and Expert Conference (TEAM), Novi Sad: Faculty of Technical Sciences, Department of Industrial Engineering and Management,, 10-12 Oktobar, 2018, pp. 29-38, ISBN 978-86-6022-098-3
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Ćopić M., Lazarević M., Dragičević D., Sremčev N., Ostojić G.: Improving the Dyehouse Production Process by QR Code Application as Poka Yoka, 17. International Scientific Conference on Industrial Systems, Novi Sad, 4-6 Oktobar, 2017, pp. 188-193, ISBN 978-86-7892-978-6
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Sremčev N., Ćosić I., Anišić Z., Lazarević M., Veža I.: Algorithm for Product Configurator Development on the Principles of Group Technology, 19. International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" - TMT, Barcelona: Faculty of Mechanical Engineering in Zenica, Escola Tecnica Superior D'Enginyeria Industrial de Barcelona - Universitat Politecnica de Catalunya, Spain, 22-23 Jul, 2015, pp. 133-136, ISBN ISSN 1840-4944
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Rankov S., Ćosić I., Šormaz D., Lazarević M., Sremčev N.: Production Flow Analysis in Textile Production, 17. International Scientific Conference on Industrial Systems, Novi Sad: Faculty of Technical Sciences, 4-6 Oktobar, 2017, pp. 44-49, ISBN 978-86-7892-978-6
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Sremčev N., Ćosić I., Anišić Z., Lazarević M., Gechevska V.: Procedure phases for configuration system development, 26. DAAAM International Symposium, Zadar: Danube Adria Association for Automation and Manufacturing, DAAAM, 21-24 Oktobar, 2015, pp. 478-482, ISBN 978-390273407-5, UDK: ISSN: 17269679
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Suzić N., Lazarević M., Sremčev N.: Design for Product Variety, 6. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Palić: Fakultet tehničkih nauka, 29-30 Septembar, 2010, pp. 219-222, ISBN 978-86-7892-278-7
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Sremčev N., Suzić N., Ćosić I., Anišić Z.: Enabling DFx Tools Using PLM Software Solutions, 1. Regional Conference - Mechatronics in Practice and Education (MECH-CONF), Subotica, 8-10 Decembar, 2011, pp. 363-369, ISBN 978-86-85409-67-7, UDK: 007.5 (082)
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Gračanin D., Stevanov B., Sremčev N., Tešić Z.: Manufacturing shop control integration: a concept and an example, 1. Regional Conference - Mechatronics in Practice and Education (MECH-CONF), Subotica: Subotica Tech, College of Applied Sciences, 8-10 Decembar, 2011, pp. 180-185, ISBN 978-86-85409-67-7
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Suzić N., Anderla A., Stefanović D., Veža I., Sremčev N.: Successsfully Solving the Configuration of Mass Customized Products , 7. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Balatonfured: Faculty of Technical Sciences, 24-26 Maj, 2012, pp. 75-78, ISBN 978-86-7892-399-9
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Sremčev N., Suzić N., Anišić Z., Gecevska V.: Improving Product Design Efficiency Using DFX Tools in PLM Surroundings, 7. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Balatonfured: Faculty of Technical Sciences, 24-26 Maj, 2012, pp. 79-84, ISBN 978-86-7892-399-9
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Suzić N., Anišić Z., Orčik A., Sremčev N.: Company Size and Successful Mass Customization, 5. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Novi Sad: Faculty of Technical Sciences, 19-21 Septembar, 2012, pp. 241-246, ISBN 978-86-7892-432-3
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Sremčev N., Ćosić I., Suzić N., Stevanov B.: APPLICATION OF PLM SYSTEMS IN GROUP TECHNOLOGY APPROACH, 23. DAAAM International Symposium, Zadar: DAAAM International, Vienna, Austria, EU, 2012, 24-27 Oktobar, 2012, pp. 981-984, ISBN 978-3-901509-91-9, UDK: ISSN 2304-1382
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Sremčev N., Lazarević Đ., Lazarević M., Suzić N.: Information Management of Distributed Production Systems, 9. International May Conference on Strategic Management - Majska konferencija o strategijskom menadžmentu (MKSM), Bor: Univerity of Belgrade, Technical Faculty in Bor, Management Department, 24-26 Maj, 2013, pp. 514-522, ISBN 978-86-6305-006-8
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Orčik A., Anišić Z., Fuerstner I., Suzić N., Sremčev N.: Co-creation in product development - students in an innovation contest, 1. International Conference on Technology Transfer - ICTT, Niš: University of Niš, and Faculty of Electronic Engineering Niš, 20-21 Jun, 2013, pp. 259-264, ISBN 978-86-6125-083-5
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Lazarević M., Ćosić I., Suzić N., Sremčev N., Lazarević Đ.: Research of Possibility to Implement Lean Principles in Product Disassembly Systems, 2. International Scientific Conference on Lean Technologies - LeanTech, Beograd: University of Belgrade – Faculty of Organizational Sciences, 5-6 Septembar, 2013, pp. 27-38, ISBN 978-86-7680-283-8
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Sremčev N., Stevanov B., Suzić N., Anišić Z.: Managing Data in Multiple Locations Production Systems: Case Study of The Railway Braking Devices Overhaul, 2. Regional Conference - Mechatronics in Practice and Education (MECHEDU), Subotica: Subotica Tech – College of Applied Sciences, , 5-6 Decembar, 2013, pp. 93-98, ISBN 978-86-7892-565-8
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Lazarević Đ., Ćosić I., Lazarević M., Rikalović A., Sremčev N.: Application of Group Tools in Production of Printed and Laminated Cardboard Packaging for Total In-process Time Reduction, 24. DAAAM International Symposium, Zadar: Procedia Engineering, DAAAM International, 23-26 Oktobar, 2013, pp. 1381-1387, ISBN 978-3-901509-97-1
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Lazarević Đ., Ćosić I., Lazarević M., Sremčev N., Suzić N.: CLASSIFIER FOR PLANK SHAPED PARTS MADE IN FURNITURE INDUSTRY, 12. International Conference – Maintenance and production engineering – KODIP, Budva: Inženjerska akademija Crne Gore, 18-21 Jun, 2014, pp. 323-326, ISBN 978-9940-527-35-8
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Lazarević M., Krsmanović C., Ćosić I., Lazarević Đ., Sremčev N.: Student Enterprise: Idea and practice, 16. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: University of Novi Sad - Faculty of Technical Sciences, Department of Industrial Engineering and Management, 15-17 Oktobar, 2014, pp. 23-26, ISBN 978-86-7892-652-5
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Suzić N., Orčik A., Lazarević Đ., Sremčev N., Stevanov B.: Analysis of Product Lifecycle for Railway Braking Devices with Focus on Overhaul Cycles, 16. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: University of Novi Sad - Faculty of Technical Sciences, Department of Industrial Engineering and Management, 15-17 Oktobar, 2014, pp. 27-32, ISBN 978-86-7892-652-5
(M34) Saopštenje sa međunarodnog skupa štampano u izvodu
Lazarević M., Ostojić G., Stankovski S., Sremčev N., Vukelić Đ.: Improvement of product disassemly and recycling process based on LCA analisys, 20. SETAC Europe - LCA Case Study Symposium, Novi Sad: SETAC, 24-26 Novembar, 2014, pp. 62-62, ISBN 2310-3191
(M51) Rad u vodećem časopisu nacionalnog značaja
Medojević M., Medojević M., Radaković N., Lazarević M., Sremčev N.: A Conceptual Solution of Low-Cost Temperature Data Logger With Relatively High Accuracy, International Journal of Industrial Engineering and Management, 2018, Vol. 9, No 1, pp. 53-58, ISSN 2217-2661, UDK: UDC 621.38:007.5
(M53) Rad u naučnom časopisu
Sremčev N., Lazarević M., Krainović B., Mandić J., Medojević M.: Improving teaching and learning process by applying Lean thinking, Procedia Manufacturing, 2018, Vol. 17, pp. 595-602, ISSN 2351-9789
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celini
Lazarević M., Ćosić I., Sremčev N., Lazarević Đ., Ostojić G.: Povećanje efikasnosti rada sistema za demontažu proizvoda primenom identifikacionih tehnologija, 1. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, 12-13 Jun, 2013, pp. 121-128, ISBN 978-86-7892-512-2
