2003-2009. Master studije na Fakultetu tehničkih nauka (Novi Sad), departman za Grafičko inženjerstvo i dizajn (Stečeno zvanje: Diplomirani inženjer grafičkog inženjerstva i dizajna - Master).
2008-2009. Saradnik u nastavi na predmetima Reprodukciona tehnika i Nauka o boji.
2009. Upis na doktorske studije na Fakultetu tehničkih nauka, Departman za Grafičko inženjerstvo i dizajn.
novembar 2010. Izbor u zvanje asistenta (predmeti: Reprodukciona tehnika i Nauka o boji).
maj 2013. Učešće na Tempus projektu "Visuality and Mathematics", studijski boravak na Univerzitetu Jyväskylä (Finska) u trajanju od mesec dana.
jul 2013. Učešće na letnjoj školi projekta "Visuality and Mathematics", Eger, Mađarska.
novembar 2013. Izbor u zvanje asistenta (predmeti: Reprodukciona tehnika, Nauka o boji, Upravljanje bojama, Rasterska grafika).
Studijski boravak na Univerzitetu u Budimpešti (Mađarska) u okviru CEEPUS projekta.
decembar 2013 - jun 2014. Studijski boravak na Univerzitetu Granada (Španija).
maj 2015.
Studijski boravak na Univerzitetu u Pardubicama (Češka Republika) u okviru CEEPUS projekta.
jun 2015.
Učešće na međunarodnom specijalističkom kursu za nastavnike iz naprednih grafičkih tehnologija u oblasti pripreme za štampu, štampe i završne grafičke obrade, Kemnic, Nemačka.
novembar 2016. Odbranjena doktorska disertacija pod nazivom "Karakterizacija kolorimetrijskih vrednosti otisaka štampanih goniohromatskim pigmentima" (Stečeno zvanje: Doktor nauka - Grafičko inženjerstvo i dizajn).
april 2017. Izbor u zvanje docenta (predmeti: Rasterska grafika i Upravljanje bojama).
decembar 2018. Studijski boravak na Univerzitetu hemijske metalurgije i tehnologije, Sofija (Bugarska) u okviru CEEPUS projekta.
maj 2019. Studijski boravak na Tehnološkom univerzitetu Lođ (Poljska) u okviru CEEPUS projekta.
april 2022. Izbor u zvanje Vanrednog profesora (predmeti: Rasterska grafika i Upravljanje bojama).
Karakterizacija kolorimetrijskih vrednosti otisaka štampanih goniohromatskim pigmentima (Colorimetric characterization of prints enhanced with goniochromatic pigments)
Doktorat
IMT Studije (Grafičko inženjerstvo i dizajn: Elektrotehničko i računarsko inženjerstvo; Primenjene umetnosti i dizajn
Tomić I., Dedijer S., Novaković D., Jurič (Rilovski) I.: Artificial neural networks for optimising camera‐based colour measurements of prints enhanced with pearlescent pigments, Coloration Technology, 2018, Vol. 134, No 5, pp. 364-372, ISSN 1472-3581
(M21) Rad u vrhunskom međunarodnom časopisu
Jurič (Rilovski) I., Karlović I., Novaković D., Tomić I.: Comparative study of different methods for the assessment of print mottle, Color Research and Application, 2016, Vol. 41, No 5, pp. 493-499, ISSN 0361-2317
(M23) Rad u međunarodnom časopisu
Tomić I., Dedijer S., Martínez-Canada P., Novaković D., Hladnik A.: Camera Characterization for Colorimetric Assessment of Goniochromatic Prints, Journal of Imaging Science and Technology, 2017, Vol. 61, No 2, pp. 020502-1 -020502-15, ISSN 1062-3701.
(M23) Rad u međunarodnom časopisu
Jurič (Rilovski) I., Karlović I., Tomić I., Novaković D.: Optical paper properties and their influence on colour reproduction and perceived print quality, Nordic Pulp and Paper Research Journal, 2013, Vol. 28, No 2, pp. 264-273, ISSN 0283-2631
(M23) Rad u međunarodnom časopisu
Dedijer S., Tomić I., Spiridonov I., Boeva R., Jurič (Rilovski) I., Milić N., Đurđević S.: Ink - jet imprints in just noticeable color difference evaluation, Bulgarian Chemical Communications, 2017, Vol. 49, No L, pp. 140-147, ISSN 0324-1130
(M23) Rad u međunarodnom časopisu
Pinćjer I., Tomić I., Adamović (Majkić) S., Miketić N.: Distance Learning: Should We Go Interactive At Any Cost?, International Journal of Engineering Education, 2022, Vol. 38, No. 2, pp. 299-309, ISSN 0949-149X
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Tomić I., Del Mar Lazaro M., Carrasco Sanchez A., Benjumea A., Ou L., Garcia J., Karlović I., Huertas R.: Texture in Color Emotions, 15. AIC 2015 Midterm Meeting, Tokyo: Color Science Association of Japan, 19-22 Maj, 2015, pp. 1058-1063
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Tomić I., Novaković D., Gebeješ A., Hladnik A., Dedijer S.: Determining Color of Goniochromatic Prints using DSLR Camera, 5. International Joint Conference on Environmental and Light Industry Technologies, Budimpešta, 19-20 Novembar, 2015, pp. 104-112, ISBN 978-615-5460-60-9
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Tomić I., Dedijer S., Pinćjer I.: Pearlescent pigments in printing, 11. Innovations in Publishing, Printing and Multimedia Technologies, Kaunas: Kaunas University of Applied Sciences, 19-20 April, 2018, pp. 151-157, ISBN 2029-4638
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Tomić I., Huertas R., Gómez-Robledo L., Dedijer S., Jurič (Rilovski) I.: Applicability of standard grey scale for reporting perceived color difference of prints enhanced with pearlescent pigments, 9. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Faculty of Technical Sciences, 8-10 Novembar, 2018, pp. 77-86, ISBN 978-86-6022-115-7
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Dedijer S., Tomić I., Pál (Apro) M., Jurič (Rilovski) I., Pavlović Ž., Milić N.: Repeatability and reproduction accuracy in electrophotography for color difference evaluations, 9. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Faculty of Technical Sciences, 8-10 Novembar, 2018, pp. 313-321, ISBN 978-86-6022-115-7
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Jurič (Rilovski) I., Novaković D., Tomić I., Lilić A., Zeljković Ž.: Difference between using colourimetric values (L*a*b*) or optical density for random print nonuniformity quantification, 9. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Faculty of Technical Sciences, 8-10 Novembar, 2018, pp. 51-54, ISBN 978-86-6022-115-7
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Pinćjer I., Tomić I.: Interactive educational tool for digital printing system, 11. Innovations in Publishing, Printing and Multimedia Technologies, Kaunas: Kaunas University of Applied Sciences, 19-20 April, 2018, pp. 106-112, ISBN 2029-4638
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Pinćjer I., Tomić I., Puškarević I., Vladić G.: Selecting the Trademark Colour Depending on the Company’s Business Area , 8. Conference on Information and Graphic Arts Technology, Ljubljana: University of Ljubljana, Chair of Information and Graphic Arts Technology, 7-8 Jun, 2018, pp. 233-237, ISBN 978-961-6900-24-9
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Dedijer S., Jurič (Rilovski) I., Tomić I., Pál (Apro) M., Milić N., Kašiković N., Vladić G.: Preliminary study of print mottle analysis in flexography using GLCM method, 11. Innovations in Publishing, Printing and Multimedia Technologies, Kaunas: Kaunas University of Applied Sciences, 19-20 April, 2018, pp. 33-39, ISBN 2029-4638
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Tomić I., Dedijer S., Jurič (Rilovski) I., Pál (Apro) M., Pavlović Ž., Vladić G.: Influence of Resolution and Print Settings on Colour Reproduction in Ink-Jet Printing, 2. 2nd International Printing Technologies Symposium – PrintIstanbul 2017, Istanbul: Marmara University, 11-12 Oktobar, 2017, pp. 273-282, ISBN 978-9944-0636-7-8
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Tomić I., Dedijer S., Jurič (Rilovski) I., Pál (Apro) M.: The Effect of Scanning Resolution and Displacement Value on the GLCM-Based Features for Paper Texture Characterization, 8. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department of Graphic Engineering and Design, 3-4 Novembar, 2016, pp. 263-271, ISBN 978-86-78928-67-3
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Tomić I., Dedijer S., Novaković D., Pinćjer I.: Defining the Optimal Training Set Size for Camera-Based Colour Measurement of Goniochromatic Prints: A Preliminary Study, 8. Conference on Information and Graphic Arts Technology, Ljubljana: University of Ljubljana, Chair of Information and Graphic Arts Technology, 7-8 Jun, 2018, pp. 48-52, ISBN 978-961-6900-24-9
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Gebejes A., Huertas R., Tremeau A., Tomić I., Biswas P., Fraza C., Hauta-Kasari M.: Texture Characterization by Grey-Level Co-occurrence Matrix from a Perceptual Approach, 24. 24th Color Imaging Conference – CIC24, San Diego: Society for Imaging Science and Technology , 7-11 Novembar, 2016, pp. 271-277, ISBN 978-0-89208-324-4
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Tomić I., Huertas R., Jurič (Rilovski) I.: Colour to texture fusion in HSI colour space, 7. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Fakultet tehničkih nauka, 13-14 Novembar, 2014, pp. 309-316, ISBN 978-86-7892-645-7
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Gebejes A., Martínez Domingo M., Heikkinen V., Tomić I.: Reflectance recovery for coated printed color samples via multiangular RGB camera measurements, 1. Colour and Visual Computing Symposium - CVCS, Gjovik: IEEE, 5-6 Septembar, 2013, pp. 1-6, UDK: DOI 10.1109/CVCS.2013.6626287
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Dedijer S., Tomić I., Pál (Apro) M., Pavlović Ž., Jurič (Rilovski) I.: Color Reproduction Quality in Multi-Pass Ink Jet Printing, 8. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department of Graphic Engineering and Design, 3-4 Novembar, 2016, pp. 225-230, ISBN 978-86-78928-67-3
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Pál (Apro) M., Dedijer S., Tomić I., Jurič (Rilovski) I., Zorić V.: Influence of sample-size variations on the in-plane tensile strength of uncoated paper, 8. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department of Graphic Engineering and Design, 3-4 Novembar, 2016, pp. 109-114, ISBN 978-86-78928-67-3
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Karlović I., Tomić I., Jurič (Rilovski) I., Pinćjer I.: Finding the relation between AM and FM halftoning with s-cie lab metrics , 8. Sigt - 7th Symposium of Information and Graphic Arts Technology, Ljubljana: University of Ljubljana, Faculty of Natural Sciences, 5-6 Jun, 2014, pp. 50-55, ISBN 978-961-6900-09-6, UDK: 655.1
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Jurič (Rilovski) I., Karlović I., Tomić I., Zdravković S.: Visual experience of Graininess, 7. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Fakultet tehnčkih nauka, 13-14 Novembar, 2014, pp. 267-271, ISBN 978-86-7892-645-7
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Karlović I., Tomić I., Jurič (Rilovski) I., Rađelović D., Ranđelović D.: Determination of substrate and halftone dot shape influence on image reproduction with image difference metric, 7. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Faculty of technical sciences, Department of graphic engineering and design, 13-14 Novembar, 2014, pp. 261-266, ISBN 978-86-7892-645-7, UDK: 655 (082)
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Jurič (Rilovski) I., Karlović I., Majnarić I., Novaković D., Tomić I.: Different methods for quantification of micro-uniformity, 46. Annual International Conference on Graphic Arts and Media Technology, Management and Education, Atina: Hellenic Union of Graphic Arts and Media Technology Engineers, 25-29 Maj, 2014, pp. 205-210, ISBN 978-618-81734-0-8
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Gebejes A., Huertas R., Tomić I., Stepanić M.: Selection of optimal features for texture characterization and perception, 1. Colour and Visual Computing Symposium - CVCS, Gjovik, 5-6 Septembar, 2013, pp. 1-5, UDK: DOI 10.1109/CVCS.2013.6626278
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Jurič (Rilovski) I., Karlović I., Novaković D., Tomić I.: Possibility of using concentric halftoning to improve print quality, 4. International Joint Conference on Environmental and Light Industry Technologies, Budimpešta: Faculty of light industry and environmental engineering, Obuda University, 20-22 Novembar, 2013, pp. 386-391, ISBN 978-615-5018-93-0
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Tomić I., Karlović I., Jurič (Rilovski) I.: Influence of lens aperture on lateral chromatic aberration in digital photography, 4. International Joint Conference on Environmental and Light Industry Technologies, Budimpešta: Faculty of light industry and environmental engineering, Obuda University, 20-22 Novembar, 2013, pp. 345-351, ISBN 978-615-5018-93-0
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Karlović I., Tomić I., Jurič (Rilovski) I.: The influence of halftone dot shapes on S-CIELab values, 4. International Joint Conference on Environmental and Light Industry Technologies, Budimpešta: Faculty of light industry and environmental engineering, Obuda University, 20-22 Novembar, 2013, pp. 368-373, ISBN 978-615-5018-93-0
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Jurič (Rilovski) I., Karlović I., Tomić I.: Influence of surface properties of ink jet papers on print sharpness, 11. Seminar in Graphic Arts, Pardubice: University of Pardubice, Department of Graphic Arts and Photophysics, 2013, 17-18 Jun, 2013, pp. 121-126, ISBN 978-80-7395-660-8
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Tomić I., Karlović I., Jurič (Rilovski) I., Szentgyörgyvölgyi R.: An influence of accelerated ageing on distinctness of image for coated offset prints, 11. Seminar in Graphic Arts, Pardubice: University of Pardubice, Department of Graphic Arts and Photophysics, 2013, 17-18 Jun, 2013, pp. 68-73, ISBN 978-80-7395-660-8
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Jurič (Rilovski) I., Karlović I., Tomić I.: The possibility of using G7 method for calibration and characterization of Xerox Docucolor digital press, 6. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Fakultet tehničkih nauka, 15-16 Novembar, 2012, pp. 203-208, ISBN 978-86-7892-457-6
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Gebeješ A., Tomić I., Huertas R., Stepanić M.: A preliminary perceptual scale for texture feature parameters, 6. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Fakultet tehničkih nauka, 15-16 Novembar, 2012, pp. 195-201, ISBN 978-86-7892-457-6
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Karlović I., Tomić I., Jurič (Rilovski) I.: Accelerated Ageing of Digitally Printed Foils With HP Latex Inks, 10. Seminar in Graphic Arts, Pardubice: University of Pardubice, 19-21 Septembar, 2011, ISBN 978-80-7395-420-8
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Tomić I., Karlović I.: Noise and Dynamic Range at Pseudo-HDR Images, 10. Seminar in Graphic Arts, Pardubice: University of Pardubice, 19-21 Septembar, 2011, pp. 93-99, ISBN 978-80-7395-420-8
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Karlović I., Novotny E., Tomić I., Novaković D.: The Influence of UV coating application on printed cardboard surface properties and colourimetric values, 38. IARIGAI, Budimpešta: IARIGAI, 11-14 Septembar, 2011, pp. 153-158, ISBN 9783981270426
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Tomić I., Gebeješ A., Karlović I.: The usability of S-CIELAB for predicting perceived colour differences of simulated textile samples, 4. "Printig Future Days" international Scinetific Conference on print and Media Technology for junior scientists and PhD students, Chemnitz: Chemnitz University of Technology, Verlag fur Wissenschaft und Bildung, 7-10 Novembar, 2011, pp. 333-339, ISBN 9783861356233
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Karlović I., Tomić I., Novaković D., Jurič (Rilovski) I.: Evaluation of distinctness of image enhanced printed samples, 43. conference of the Internetional Circle of Educational Institutes for Graphic Arts Technology and Management, Norrköping: International Circle, 19-23 Septembar, 2011, pp. 13-19
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Jurič (Rilovski) I., Karlović I., Tomić I.: Digital Print Mottle as a Quantitative Tool for Print Quality Assessment, 10. Seminar in Graphic Arts, Pardubice: University of Pardubice, 19-21 Septembar, 2011, pp. 83-87, ISBN 978-80-7395-420-8
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Tomić I., Ljumić Z., Đokić M.: Spatially uniform and varying HDR tone mapping techniques evaluation, 5. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Novi Sad: Faculty of Technical Sciences, Graphic Engineering and Design, 11-12 Novembar, 2010, pp. 177-186, ISBN 978-86-7892-294-7
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Karlović I., Tomić I., Novotny E.: The comparison of print gloss and colour difference of conventional and hybrid inks coated with glossy aqueos conventional and hybrid inks coated with glossy aqueos and UV coatings in correlation with surface, 5. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Fakultet tehničkih nauka, 11-12 Novembar, 2010, pp. 243-248, ISBN 978-86-7892-294-7
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Karlović I., Tomić I., Dedijer S., Pál (Apro) M., Novaković D.: The correlation of surface roughnes parameters of print enhancement foils and optical and colourimetric properties of offset prints, 1. International Joint Conference on Environment and Light Industry Technologies, Budimpešta: Rejto Sándor Faculty of Light Industry and Environmental Engineering, Óbuda University., 18-19 Novembar, 2010, pp. 181-188, ISBN 978-615-5018-08-4
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Karlović I., Novaković D., Tomić I.: The influence of the surface roughness parameters of offset coated samples on print gloss, 5. International Symposium on Novelties in Graphics, Ljubljana: University of Ljubljana, Faculty of Natural Sciences and Engineering, Department of Textiles, 27-29 Maj, 2010, pp. 646-651, ISBN 978-961-6045-80-3
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Karlović I., Novaković D., Tomić I.: The influence of the surface roughness of aqueous coated offset prints samples on the colourimetric values, 42. 42nd Conference of International Circle of Educational Institutes for Graphic Arts Technology and Management, Moskva: International Circle of International Circle of Educational Institutes, Moscow State University of printing, 19-20 Oktobar, 2010, pp. 62-69
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Karlović I., Novaković D., Tomić I., Bišćan V.: Colour rendering differences of ICC profiles in Internet browsers, 9. Seminar in Graphic Arts, Pardubice: University Of Pardubice, Department of Graphic Arts and Photophysics, 23-24 Septembar, 2009, pp. 116-120, ISBN 978-80-7395-200-6
(M34) Saopštenje sa međunarodnog skupa štampano u izvodu
Pál (Apro) M., Koltai L., Dedijer S., Kašiković N., Pavlović Ž., Vladić G., Tomić I.: Preliminary analysis of crack distribution for objective fold-crack assessment, 1. IJCELIT 2017 - International Joint Conference on Enviromental and Light Industry Technologies, Budimpešta: Rejtő Sándor Faculty of Light Industry and Environmental Protection Engineering, 23-24 Novembar, 2017, pp. 27-27, ISBN 978-963-449-061-6
(M34) Saopštenje sa međunarodnog skupa štampano u izvodu
Tomić I., Dedijer S., Szentgyörgyvölgyi R., Novaković D., Jurič (Rilovski) I.: Lightfastness of Goniochromatic Prints, 1. IJCELIT 2017 - International Joint Conference on Enviromental and Light Industry Technologies, Budimpešta: Rejtő Sándor Faculty of Light Industry and Environmental Protection Engineering, 23-24 Novembar, 2017, ISBN 978-963-449-061-6
(M34) Saopštenje sa međunarodnog skupa štampano u izvodu
Dedijer S., Pál (Apro) M., Tomić I., Pavlović Ž., Vasić J., Vladić G., Kašiković N.: Study of line and dot elements reproduction on digital flexo printing plates using flexcel nx imaging technology, 1. IJCELIT 2017 - International Joint Conference on Enviromental and Light Industry Technologies, Budimpešta: Rejtő Sándor Faculty of Light Industry and Environmental Protection Engineering, 23-24 Novembar, 2017, ISBN 978-963-449-061-6
(M34) Saopštenje sa međunarodnog skupa štampano u izvodu
Tomić I., Karlović I., Novaković D., Jurič (Rilovski) I.: Image analysis techniques for assessing print quality, 44. Annual Conference of the International Circle of Educational Institutes for Graphic Arts Technology and Management, Budimpešta: Obuda University, 19-22 Jun, 2012
(M34) Saopštenje sa međunarodnog skupa štampano u izvodu
Jurič (Rilovski) I., Karlović I., Novaković D., Tomić I.: Influence of marking engines and toner/ink types on the formed elements of the image in digital printing, 44. Annual Conference of the International Circle of Educational Institutes for Graphic Arts Technology and Management, Budimpešta: Obuda University, 19-22 Jun, 2012
(M51) Rad u vodećem časopisu nacionalnog značaja
Nedeljković U., Novaković D., Puškarević I., Tomić I.: Helvetica as a Type Convention for the Youthful and Trendy Image: A Consumer Response to Designer Safe Option, Marketing - Časopis za marketing, teoriju i praksu, 2014, Vol. 45, No 1, pp. 50-62, ISSN 0354-3471, UDK: 003 655.26
(M52) Rad u časopisu nacionalnog značaja
Zorić V., Novaković D., Kašiković N., Milošević R., Tomić I.: Spektrofotometrijska analiza otisaka dobijenih ink-džet štampom na poliestarskim materijalima, Tekstilna industrija, 2015, No 4, pp. 20-26, ISSN 0040-2389, UDK: 667+687
(M52) Rad u časopisu nacionalnog značaja
Jurič (Rilovski) I., Novaković D., Karlović I., Tomić I.: The possibility of using recycled paper in digital printing, Advanced Technologies, 2013, Vol. 2, No 1, pp. 26-32, ISSN 2406-2979, UDK: 676:655.3:628.477.6
(M53) Rad u naučnom časopisu
Pavlović Ž., Dedijer S., Pál (Apro) M., Tomić I., Jurič (Rilovski) I.: Readability of screen printed QR codes depending on their dimension, encoded content and type of printing substrate using screen printing technique , Glasnik hemičara, tehnologa i ekologa Republike Srpske, 2016, Vol. 12, No 1, pp. 37-45, ISSN 1840-054X, UDK: 54+66+502/504
(M53) Rad u naučnom časopisu
Medić I., Karlović I., Tomić I.: Estimating of the Influence of Screening Parameters to the Quality of Chromatic Images Through Usage of S-CIELAB , Zbornik radova Fakulteta tehničkih nauka, 2015, Vol. 4, pp. 625-628, ISSN 0350-428X, UDK: 655.2.027:778.8
(M53) Rad u naučnom časopisu
Jurič (Rilovski) I., Ranđelović D., Karlović I., Tomić I.: Influence of the surface roughness of coated and uncoated papers on the digital print mottle, Journal of Graphic Engineering and Design, 2014, Vol. 5, No 1, pp. 17-23, ISSN 2217-379X, UDK: 620.179.118 655.062
(M53) Rad u naučnom časopisu
Marjanović M., Karlović I., Tomić I.: Procena kabine za posmatranje pomoću modela hromatske adaptacije, Zbornik radova Fakulteta tehničkih nauka, 2014, Vol. 29, No 2, pp. 213-216, ISSN 0350-428X
(M53) Rad u naučnom časopisu
Tomić I., Karlović I., Jurič (Rilovski) I.: Practical Assessment of Veiling Glare in Camera Lens System, Journal of Graphic Engineering and Design, 2014, Vol. 5, No 2, pp. 23-28, ISSN 2217-379X, UDK: 655.22778.18681.7.066
(M53) Rad u naučnom časopisu
Gebeješ A., Karlović I., Tomić I.: Višeugaono merenje štampanih goniohromatskih uzoraka, Zbornik radova Fakulteta tehničkih nauka, 2013, No 6, pp. 913-917, ISSN 0350-428X
(M53) Rad u naučnom časopisu
Jurič (Rilovski) I., Novaković D., Karlović I., Tomić I.: Influence of gloss and surface roughness of coated ink jet papers on print uniformity, Acta Graphica, 2013, Vol. 24, No 3-4, pp. 85-92, ISSN 0353-4707
(M53) Rad u naučnom časopisu
Karlović I., Tomić I., Jurič (Rilovski) I.: Influence of types tone value of types on character formation and accuracy of optical character recognition, Scientific papers of the University of Pardubice, Faculty of Chemical Technology, Seria A, 2013, Vol. 13, pp. 215-226, ISSN 1211-5541
(M53) Rad u naučnom časopisu
Vukojević J., Karlović I., Tomić I.: Procena odsjaja kod objektiva digitalnih fotoaparata i metode korekcije, Zbornik radova Fakulteta tehničkih nauka, 2013, Vol. 28, No 10, pp. 1737-1740, ISSN 0350-428X
(M53) Rad u naučnom časopisu
Veljković M., Karlović I., Tomić I.: Distorzija i kontrola perspektive kod ultra širokougaonih objektiva, Zbornik radova Fakulteta tehničkih nauka, 2013, Vol. 28, No 12, pp. 2199-2202, ISSN 0350-428X
(M53) Rad u naučnom časopisu
Jurič (Rilovski) I., Karlović I., Novaković D., Tomić I.: Influence of paper surface properties and toner type on digital print mottle, Celuloza si Hartie, 2012, Vol. 61, No 2, pp. 4-9, ISSN 1220-9848
(M53) Rad u naučnom časopisu
Karlović I., Tomić I., Jurič (Rilovski) I., Novaković D., Vučinić-Vasić M., Kozmidis-Luburić U.: The Influence of the Surface Roughness of Aqueous Coated Samples and the Particle Size of the Coatings on the Reflection and Colourimetric Values of Offset Printed Samples, International Circular of Graphic Education and Research, 2012, Vol. 5, No 1, pp. 18-29, ISSN 2166-465X, UDK: 655
(M53) Rad u naučnom časopisu
Gebeješ A., Tomić I., Karlović I., Jurič (Rilovski) I.: Evaluation of the algorithms for recovering reflectance from virtual digital camera response, Journal of Graphic Engineering and Design, 2012, Vol. 3, No 2, pp. 23-30, ISSN 2217-379X, UDK: 519.65 : 519.876.5 : 535.653.3
(M53) Rad u naučnom časopisu
Stančić M., Novaković D., Tomić I., Karlović I.: Influence of Substrate and Screen Thread Count on Reproduction of Image Elements in Screen Printing, Acta Graphica, 2012, Vol. 23, No 1-2, pp. 1-12, ISSN 0353-4707, UDK: 655.227:655.332
(M53) Rad u naučnom časopisu
Mladenović N., Karlović I., Tomić I.: Kontrast slike na oplemenjenim digitalnim otiscima, Zbornik radova Fakulteta tehničkih nauka, 2012, Vol. 27, No 16, ISSN 0350-428X
(M53) Rad u naučnom časopisu
Stajić I., Karlović I., Tomić I.: Hromatske vrednosti fotografskih otisaka, Zbornik radova Fakulteta tehničkih nauka, 2012, Vol. 27, No 13, pp. 2699-2672, ISSN 0350-428X, UDK: 0350-428X
(M53) Rad u naučnom časopisu
Veselinović D., Karlović I., Tomić I.: Tipične greške kod digitalne fotografije i mogućnost korekcije, Zbornik radova Fakulteta tehničkih nauka, 2011, Vol. 26, No 2, pp. 277-281, ISSN 0350-428X
(M53) Rad u naučnom časopisu
Keler A., Karlović I., Tomić I.: Uticaj ubrzanog starenja na kolorimetrijske vrednosti konvencionalnih i hibridnih boja, Zbornik radova Fakulteta tehničkih nauka, 2011, Vol. 26, No 2, pp. 297-301, ISSN 0350-428X, UDK: 655.2
(M53) Rad u naučnom časopisu
Jurič (Rilovski) I., Karlović I., Tomić I.: Oštrina digitalnog otiska kao način procene kvaliteteta štampe, Zbornik radova Fakulteta tehničkih nauka, 2011, Vol. 26, No 6, pp. 1473-1476, ISSN 0350-428X
(M53) Rad u naučnom časopisu
Nenadić I., Karlović I., Tomić I.: Opseg Boja sa dodatnim bojama u ink jet štampi, Zbornik radova Fakulteta tehničkih nauka, 2011, Vol. 26, No 15, pp. 3529-3532, ISSN 0350-428X
(M53) Rad u naučnom časopisu
Levnajić M., Karlović I., Tomić I.: Promene u spektru boja prilikom preračunavanja iz raw datoteke u TIFF i JPEG datoteke, Zbornik radova Fakulteta tehničkih nauka, 2011, No 6, pp. 1437-1440, ISSN 0350-428X, UDK: 655.2
(M53) Rad u naučnom časopisu
Kojadinović S., Karlović I., Tomić I.: Uticaj oblika rasterskih tački na tonske vrednosti u sito štampi, Zbornik radova Fakulteta tehničkih nauka, 2011, No 6, pp. 1441-1444, ISSN 0350-428X, UDK: 655.2
(M53) Rad u naučnom časopisu
Novaković D., Tomić I.: The usability of calibrating monitor for soft proof according to CIE CAM02 colour appearance model, Acta Graphica, 2010, Vol. 21, No 1-2, pp. 15-25, ISSN 0353-4707, UDK: 655.3:004.9:004.353
(M53) Rad u naučnom časopisu
Novaković D., Karlović I., Tomić I.: Black point compensation and its influence on image appearance, Journal of Graphic Engineering and Design, 2010, Vol. 1, No 1, pp. 9-15, ISSN 2217-379X, UDK: 070.1
(M53) Rad u naučnom časopisu
Tomić I., Novaković D., Karlović I.: Testiranje CIE CAM02 modela osećaja boja kod kalibracije monitora za ekranski probni prikaz, Zbornik radova Fakulteta tehničkih nauka, 2009, Vol. 24, No 7, pp. 2311-2314, ISSN 0350-428X
(M53) Rad u naučnom časopisu
Senji E., Dedijer S., Tomić I.: Reprodukcija tonskih vrednosti na ink jet otiscima u zavisnosti od broja prolaza prilikom štampe, Zbornik radova Fakulteta tehničkih nauka, 2017, Vol. 32, No 5, pp. 783-786, ISSN 0350-428X, UDK: 655
(M53) Rad u naučnom časopisu
Pavlović Ž., Dedijer S., Pál (Apro) M., Tomić I., Jurič (Rilovski) I.: Readability of screen printed QR codes depending on their dimension, encoded content and type of printing substrate using screen printing technique , Glasnik hemičara, tehnologa i ekologa Republike Srpske, 2016, Vol. 12, No 1, pp. 37-45, ISSN 1840-054X, UDK: 54+66+502/504
(M53) Rad u naučnom časopisu
Szabo V., Dedijer S., Tomić I.: UTICAJ SVOJSTAVA PODLOGE ZA ŠTAMPU NA S-CIELAB VREDNOSTI OTISKA, Zbornik radova Fakulteta tehničkih nauka, 2016, Vol. 31, No 17, pp. 3290-3293, ISSN 0350-428X
(M53) Rad u naučnom časopisu
Videc J., Dedijer S., Tomić I.: UTICAJ SPEKTRALNE RASPODELE IZVORA SVETLA NA REPRODUKCIJU BOJA OTISAKA OSLOJENIH PERLASCENTNIM PIGMENTIMA, Zbornik radova Fakulteta tehničkih nauka, 2016, Vol. 31, No 17, pp. 3266-3269, ISSN 0350-428X
(M53) Rad u naučnom časopisu
Belić H., Dedijer S., Tomić I.: UTICAJ BELINE PODLOGE NA REPRODUKCIJU BOJE U DIGITALNOJ ŠTAMPI, Zbornik radova Fakulteta tehničkih nauka, 2016, Vol. 31, No 17, pp. 3253-3256, ISSN 0350-428X
(M53) Rad u naučnom časopisu
Višnjičanin J., Dedijer S., Tomić I.: UTICAJ NAČINA MAPIRANJA NA OPSEG BOJA U OFSET TEHNICI ŠTAMPE, Zbornik radova Fakulteta tehničkih nauka, 2016, Vol. 31, No 17, pp. 3249-3252, ISSN 0350-428X
(M53) Rad u naučnom časopisu
Povolni J., Karlović I., Tomić I.: Procena učinka i potencijala tehnologije merenja boja za mobilne telefone, Zbornik radova Fakulteta tehničkih nauka, 2015, Vol. 30, No 8, pp. 1367-1370, ISSN 0350-428X, UDK: 655
(M53) Rad u naučnom časopisu
Šolaja J., Karlović I., Tomić I.: Uticaj teksture digitalno štampanih tekstilnih materijala na reprodukciju grafičkih elemenata, Zbornik radova Fakulteta tehničkih nauka, 2012, Vol. 27, No 11, pp. 2183-2186, ISSN 0350-428X, UDK: 681.6
(M53) Rad u naučnom časopisu
Josifović P., Karlović I., Tomić I.: Metode kalibracije TV uređaja, Zbornik radova Fakulteta tehničkih nauka, 2012, Vol. 27, No 6, pp. 1225-1228, ISSN 0350-428X, UDK: 621
(M53) Rad u naučnom časopisu
Drakula R., Karlović I., Tomić I.: Razdvojivost slike na oplemenjenim površinama, Zbornik radova Fakulteta tehničkih nauka, 2012, Vol. 27, No 6, pp. 1217-1220, ISSN 0350-428X, UDK: 655.24.24
(M53) Rad u naučnom časopisu
Bašić D., Karlović I., Tomić I.: Merenje funkcije prenosa modulacije skenera i digitalnog fotoaparata, Zbornik radova Fakulteta tehničkih nauka, 2012, Vol. 27, No 6, pp. 1201-1204, ISSN 0350-428X, UDK: 655
(M53) Rad u naučnom časopisu
Jelovac J., Karlović I., Tomić I.: Uticaj optičkog zacrnjenja na kvalitet prepoznavanja slovnih znakova, Zbornik radova Fakulteta tehničkih nauka, 2012, Vol. 27, No 2, pp. 330-333, ISSN 0350-428X, UDK: 621.39
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celini
Jurič (Rilovski) I., Karlović I., Novaković D., Tomić I.: Comparative view of the quality of prints using iCtP and conventional plates, 10. Conference of Chemists, Technologists and Environmentalists of Republic of Srpska, Banja Luka: University in Banja Luka Faculty of Technology, 15-16 Novembar, 2013, pp. 477-482, ISBN 978-99938-54-50-0
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celini
Karlović I., Tomić I., Jurič (Rilovski) I., Bašić D.: Influence of the Scanning Resolution on the Modulation Transfer Function, 18. Međunarodni simpozijum iz oblasti celuloze, papira, ambalaže i grafike, Zlatibor: Tehnološko Metalurški Fakultet, Univerzitet u Beogradu, 19-22 Jun, 2012, pp. 75-83, ISBN 978-86-7401-283-3, UDK: 676(082) 621.798.14(082) 655(082)
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celini
Karlović I., Novaković D., Tomić I.: Uticaj debljine folije za plastifikaciju na geometrijske i hromatske karakteristike ofsetnih otisaka, 16. Međunarodni simpozijum iz oblasti celuloze, papira, ambalaže i grafike, Zlatibor: Tehnološko-metalurški fakultet Univerziteta u Beogradu, Centar celulozno-papirne, ambalažne i grafičke industrije Srbije, 15-18 Jun, 2010, pp. 141-145, ISBN 978-86-7401-267-3
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celini
Tomić I., Karlović I., Novaković D.: Definisanje razlika pri generisanju profila skenera, 16. Međunarodni simpozijum iz oblasti celuloze, papira, ambalaže i grafike, Zlatibor: Tehnološko-metalurški fakultet Univerziteta u Beogradu, Centar celulozno-papirne, ambalažne i grafičke industrije Srbije, 15-18 Jun, 2010, pp. 147-154, ISBN 978-86-7401-267-3
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celini
Milić N., Novaković D., Tomić I.: Effects of display gamma and the viewing conditions on the appearance of colours viewed on LCD monitors, 14. "Blaž Baromić" International Conference on printing, design and graphic communications, Senj: Sveučilište u Zagrebu, Grafički fakultet, 6-9 Oktobar, 2010, pp. 259-266, ISBN 978-953-7644-06-2
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celini
Tomić I., Karlović I., Novaković D.: The influence of UCR and GCR colour separation techniques on reproducible colours in ink-jet printing, 14. "Blaž Baromić" International Conference on printing, design and graphic communications, Senj: Sveučilište u Zagrebu, Grafički fakultet, 6-9 Oktobar, 2010, pp. 380-388, ISBN 978-953-7644-06-2
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celini
Tomić I., Dedijer S., Pál (Apro) M., Vladić G., Pavlović Ž.: Procena razlike u opsegu boja u zavisnosti od načina mapiranja u ofset tehnici štampe , 11. Conference of Chemists, Technologists and Environmentalists of Republic of Srpska, Teslić: University of Banjaluka, Faculty of Technology, 18-19 Novembar, 2016, pp. 529-538, ISBN 978-99938-54-67-8
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celini
Tomić I., Karlović I., Jurič (Rilovski) I., Vukojević J.: Testiranje kvaliteta objektiva digitalnog fotoaparata kroz procenu hromatske aberacije , 10. Conference of Chemists, Technologists and Environmentalists of Republic of Srpska, Banja Luka: University in Banja Luka Faculty of Technology, 15-16 Novembar, 2013, pp. 541-549, ISBN 978-99938-54-50-0
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celini
Karlović I., Novaković D., Stipančević T., Tomić I.: Uticaj površinskog oplemenjivanja uzoraka sa različitim količinama vododisperzivnih lakova na vizuelni osećaj boja, 4. Naučno - stručni simpozijum GRID, Novi Sad: Fakultet tehničkih nauka, 13-14 Novembar, 2008, pp. 155-164, ISBN 978-86-7892-145-2
(M64) Saopštenje sa skupa nacionalnog značaja štampano u izvodu
Tomić I., Carrasco-Sanz A., Huertas R., Lazaro M., Benjumea A., Ou L., Garcia J.: Escalas para el estudio de emociones del color en muestras con textura, 11. Reunión Nacional de Óptica, Salamanca, 1-3 Septembar, 2015, ISBN 978-84-608-4609
(M71) Odbranjena doktorska disertacija
Tomić I.: Karakterizacija kolorimetrijskih vrednosti otisaka štampanih goniohromatskim pigmentima, Doktorska disertacija, Novi Sad, Fakultet tehničkih nauka, 2016.
(M85) Prototip, nova metoda, softver, standardizovan ili atestiran instrument,
Novaković D., Pavlović Ž., Zeljković Ž., Nedeljković U., Dedijer S., Kašiković N., Vladić G., Pál (Apro) M., Avramović D., Pinćjer I., Milić N., Tomić I., Jurič (Rilovski) I., Đurđević S.: Softverski model za unapređenje znanja i proizvodnje u grafičkoj industriji, Tehničko rešenje, 2015
(U02) Pomoćni udžbenik za nastavni predmet
Karlović I., Tomić I., Rilovski I.: “Digitalna reprofotografija, Priručnik za vežbe”, Fakultet tehničkih nauka, Novi Sad, 2012., ISBN 978-86-7892-407-1.
(U02) Pomoćni udžbenik za nastavni predmet
Dedijer, S., Tomić, I., Milić, N.: "Nauka o boji, Praktikum za vežbe", Fakultet tehničkih nauka, Novi Sad, 2018., ISBN 978-86-6022-131-7.
