Ivana Milenković was born in Odžaci. She received her primary and secondary education in Odžaci. In 2001, she enrolled in studies at the Faculty of Technical Sciences, in the study program Industrial Engineering, majoring in Mechatronics, Robotics and Automation. She obtained the academic title Master of Industrial Engineering on 28.09.2006.
During her studies, she was awarded of scholarships from the Fund for Young Talents of the Republic of Serbia, the Dr. Zoran Đinđić Fund, and numerous other faculty and university scholarships and awards.
In February 2007, she enrolled in PhD studies at the Faculty of Technical Sciences in the Industrial Engineering study program, as part of the first generation of students who attend studies in accordance with the new Law on Higher Education and was a scholarship recipient of the Serbian Ministry of Science. Since 2008, she has been employed at the Faculty of Technical Sciences, first as a teaching assistant, and since September 2009, as an assistant-master for the scientific field of Mechatronics, Robotics and Automation.
She obtained the title of PhD in Industrial Engineering in October 2014, defending her doctoral dissertation entitled "Compressed air quality as a function of sustainable production" in the field of Industrial Engineering. In February 2015, she was elected to the position of assistant professor, and in February 2020, to the position of associate professor.
She is the author of a large number of scientific papers.
In addition to professional internships at the companies Festo and Siemens, in Germany and Austria, she was also a guest lecturer at the Technikum in Vienna.
She was a collaborator on numerous TEMPUS projects and projects of the Ministry of Science, as well as a participant in numerous projects implemented with the economy in the area of increasing the energy efficiency of compressed air systems.
() Monographic study/chapter in M12 or research in the thematic collection of the international importance
Šešlija D., Ignjatović I., Dudić S.: Increasing the Energy Efficiency in Compressed Air Systems, Rijeka, InTech, 2012, str. 151-174, ISBN 978-953-51-0800-9
() Research published in the top international journal
Ignjatović I., Komenda T., Šešlija D., Malisa V.: Optimisation of compressed air and electricity consumption in a complex robotic cell, Robotics and Computer-integrated Manufacturing, 2012, ISSN 0736-5845
() Research published in the prominent international journal
Dudić S, Šulc J, Reljić V, Bajči B, Šešlija D, Milenković I, Automatic device for remote measuring of circularity - development and implementation in education courses, Journal of Engineering Research, 2021, Vol.9 No. (4A) pp. 235-245, DOI:10.36909/jer.9753
() Research published in the prominent international journal
Šulc J., Bajči B., Reljić V., Milenković I., Šešlija D., Dudić S.: Automatic manipulator for remote measurement of linear dimensions—development and integration in education courses, Computer Applications in Engineering Education, 2018, Vol. 26, No 4, pp. 947-958, ISSN 1061-3773, DOI: 10.1002/cae.21939
() Research published in the prominent international journal
Reljić V., Milenković I., Bajči B., Šešlija D., Šulc J.: Remotely controlled compressed air spring—Design and implementation for distance education, Computer Applications in Engineering Education, 2018, pp. 1-10, ISSN 1061-3773, DOI: 10.1002/cae.22015
() Research published in the prominent international journal
Šešlija D., Milenković I., Dudić S., Šulc J.: Improving EnergyEfficiency in Compressed Air Systems - Practical Experiences, Thermal Science, 2016, Vol. 20, pp. 355-370, ISSN 0354-9836, UDK: 621
() Research published in the prominent international journal
Dudić S., Ignjatović I., Šešlija D., Blagojević V., Miodrag S.: Leakage quantification of compressed air using ultrasound and infrared thermography, MEASUREMENT, 2012, Vol. 45, No 7, pp. 1689-1694, ISSN 0263-2241
() Research published in the prominent international journal
Dudić S., Ignjatović I., Šešlija D., Blagojević V., Stojiljković M.: Leakage quantification of compressed air on pipes using thermovision, Thermal Science, 2012, Vol. 16, No 2, pp. 621-631, ISSN 0354-9836
() Research published in the prominent international journal
Šešlija D., Ignjatović I., Dudić S., Lagod B.: Potential energy savings in compressed air systems in Serbia, African Journal of Business Management, 2011, Vol. 5, No 14, pp. 5637-5645, ISSN 1993-8233
() Research published in the international journal
Milenković I, Reljić V, Dudić S, Mladenović V (2023) Energy efficient compressed air filtration: An experimental study on the effect of filters selection and configuration on pressure drop, Thermal Science ISSN: 0354-9836, DOI: https://doi.org/10.2298/TSCI230212144M
() Research published in the international journal
Šulc J, Vidicki P, Reljić V, Milenković I, Dudić S (2023) Augmented Reality as an Aid to Collaborative and Autonomous Learning in Engineering Education, Journal of Scientific and Industrial Research ISSN: 0022-4456, Vol. 82, No.7, pp. 736-744, DOI: 10.56042/jsir.v82i07.2150
() Research published in the international journal
Ignjatović I., Šešlija D., Tarjan L., Dudić S.: Wireless sensor system for monitoring of compressed air filters, Journal of Scientific and Industrial Research (JSIR), 2012, Vol. 71, No 5, pp. 334-340, ISSN 0022-4456
() Invited lectures from the international meeting printed in its entirety
Šešlija D., Ignjatović I., Dudić S.: Compressed air system structure and energy efficiency, 15. Symposium on Thermal Science and Engineering of Serbia, Soko Banja: University of Nis, Faculty of Mechanical Engineering and Society of Thermal Engineers of Serbia, 18-21 Oktobar, 2011, pp. 649-658, ISBN 978-86-6055-018-9
() Invited lectures from the international meeting printed in its entirety
Šešlija D., Ignjatović I.: Wireless monitoring of compressed air filters, 10. Triennial International SAUM Conference on Systems, Automatic Control and Measurements, Niš: University of Niš, Faculty of Electronic Engineering, Faculty of Mechanical Engineering, 10-12 Novembar, 2010, pp. 158-164, ISBN 978-86-6125-020-0
() Invited lectures from the international meeting printed in its entirety
Šešlija D., Milenković I., Dudić S.: An Overview of Energy Efficient Pneumatic Control, 7. PSU-UNS International Conference on Engineering and Technology - ICET, Phuket: Prince of Songkla University, Faculty of Engineering, 19-20 Jun, 2015
() Invited lectures from the international meeting printed in its entirety
Milenković I., Šešlija D.: Implementation of cloud manufacturing in a concept of Industry 4.0, 8. International Conference Life Cycle Engineering and Management - ICDQM, Prijevor: DQM Research center, 29-30 Jun, 2017, pp. 31-38, ISBN 978-86-86-355-34-8, UDK: 005.6(082)
() Report from the international meeting printed in its entirety
Reljić V., Milenković I., Šešlija D., Dudić S.: Failsafe behaviour of basic pneumatic systems, 17. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Faculty of Technical Sciences, 4-6 Oktobar, 2017, pp. 112-115, ISBN 978-86-7892-978-6
() Report from the international meeting printed in its entirety
Bajči B., Reljić V., Milenković I., Šulc J., Vidicki P.: Using a Remotely Controlled Automated Device for Measuring Linear Dimensions in Teaching Activities in Secondary Vocational Schools, 17. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Faculty of Technical Sciences, 4-6 Oktobar, 2017, pp. 142-147, ISBN 978-86-7892-978-6
() Report from the international meeting printed in its entirety
Reljić V., Šešlija D., Šulc J., Bajči B., Dudić S., Milenković I.: Modular Construction of Circular Manipulator as a Test Bed for Testing Pneumatic Control, 9. The 9th International Symposium - KOD 2016 - Machine and Industrial Design in Mechanical Engineering, Balatonfured: Faculty of Technical Sciences, Novi Sad, Faculty of Engineering, Hunedoara, Faculty of Engineering, Szeged, 9-12 Jun, 2016, pp. 225-228, ISBN 978-86-7892-821-5
() Report from the international meeting printed in its entirety
Šulc J, Jurošević V, Reljić V, Milenković I, Dudić S, Dakić N, Šešlija D (2022) Two-axis pneumatic manipulator as a test bed for teaching energy efficiency of compressed air systems, International scientific conference Technics and Informatics in Education – TIE, ISBN 978-86-7776-262-9, pp. 194-200, DOI: 10.46793/TIE22.194S
() Report from the international meeting printed in its entirety
Bajči B., Šulc J., Reljić V., Šešlija D., Dudić S., Milenković I.: Remote Laboratory for Learning Basics of Pneumatic Control, 14. International Conference on Remote Engineering and Virtual Instrumentation - REV, New York: Columbia University, New York, 15-17 Mart, 2017, pp. 118-124
() Report from the international meeting printed in its entirety
Reljić V, Dudić S, Trišić Ž, Jekić B, Jurošević V, Milenković I, Augmented Reality as a Support to Solve Pallet Loading Problem, International Conference on Remote Engineering and Virtual Instrumentation - REV 2022, 2022, pp. 338-348, DOI: https://doi.org/10.1007/978-3-031-17091-1_27
() Report from the international meeting printed in its entirety
Bajči B., Dudić S., Šulc J., Reljić V., Šešlija D., Milenković I.: Using Remotely Controlled One-way Flow Control Valve for Speed Regulation of Pneumatic Cylinder, 15. International Conference on Remote Engineering and Virtual Instrumentation, Dusseldorf: University of Applied Sciences Duesseldorf, Germany, 21-23 Mart, 2018, pp. 8-15
() Report from the international meeting printed in its entirety
Bajči B., Šulc J., Reljić V., Šešlija D., Dudić S., Milenković I.: Remote Laboratory for Learning Basics of Pneumatic Control, 14. International Conference on Remote Engineering and Virtual Instrumentation - REV, New York: Columbia University, New York, 15-17 Mart, 2017, pp. 144-150, ISBN 978-3-319-64351-9
() Report from the international meeting printed in its entirety
Bajči B., Dudić S., Šulc J., Milenković I., Šešlija D., Reljić V.: Remote System for Measuring Geometric Tolerances: Roundness, 13. International Conference on Remote Engineering and Virtual Instrumentation - REV, Madrid: UNED Madrid, 24-26 Februar, 2016, pp. 279-280, ISBN 978-1-4673-8245-8
() Report from the international meeting printed in its entirety
Šulc J., Šešlija D., Dudić S., Milenković I.: Implementation of Remote Laboratory for Measuring Linear Dimensions in the Process of e-Learning, 3. Experiment@ International Conference, Azores, 2-4 Jun, 2015, pp. 65-66, ISBN 978-989-20-5753-8
() Report from the international meeting printed in its entirety
Šešlija D., Dudić S., Ignjatović I.: Cost effectiveness t of pressure regulation on return stroke of pneumatic actuators, 11. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka, 20-21 Septembar, 2012
() Report from the international meeting printed in its entirety
Anišić Z., Šešlija D., Ignjatović I., Mladenović V.: PLM master curriculum design at University of Novi Sad - Faculty of Technical Sciences, 8. The IFIP WG 5.1 International Conference on Product Lifecycle Management, Eindhoven: Technical University Eindhoven, 11-13 Jul, 2011
() Report from the international meeting printed in its entirety
Malisa V., Titanilla K., Ignjatović I.: Energy efficient automation on an example of a demo robot cell, 15. International Scientific Conference on Industrial Systems - IS, Novi Sad: Faculty of Technical Sciences, 14-16 Septembar, 2011, pp. 97-100, ISBN 978-86-7892-341-8
() Report from the international meeting printed in its entirety
Dudić S., Ignjatović I., Šešlija D.: Usage of non-destructive methods in compressed air system, 15. International Scientific Conference on Industrial Systems - IS, Novi Sad: Faculty of Technical Sciences, 14-16 Septembar, 2011, pp. 101-104, ISBN 978-86-7892-341-8
() Report from the international meeting printed in its entirety
Ignjatović I., Vasiljev M., Šešlija D.: Energy effect of inappropriate dryer use in compressed air system-example of bad practice, 15. International Scientific Conference on Industrial Systems - IS, Novi Sad: Faculty of Technical Sciences, 14-16 Septembar, 2011, pp. 110-113, ISBN 978-86-7892-341-8
() Report from the international meeting printed in its entirety
Ignjatović I., Šešlija D., Dudić S.: Increasing energy efficiency of compressed air for sustainable production of food and beverage, 2. Management of Technology – Step to Sustainable Production - MOTSP, Rovinj: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2-4 Jun, 2010, UDK: 978-953-7738-09-9
() Report from the international meeting printed in its entirety
Ignjatović I., Šešlija D.: Origins of industrial engineering and management, 14. International Scientific Conference on Industrial Systems - IS, Novi Sad: Fakultet tehničkih nauka, Departman za industrijsko inženjerstvo i menadžment, Novi Sad, 2-3 Oktobar, 2008, pp. 17-24, ISBN 978–86–7892–135-3
() Report from the international meeting printed in its entirety
Šešlija D., Ignjatović I., Dudić S., Šešlija M.: New structure of distribution system for compressed air, 14. International Scientific Conference on Industrial Systems - IS, Novi Sad: Fakultet tehničkih nauka, Departman za industrijsko inženjerstvo i menadžment, Novi Sad, 2-3 Oktobar, 2008, pp. 167-173, ISBN 978–86–7892–135-3
() Report from the international meeting printed in its entirety
Dudić S., Šešlija D., Ignjatović I.: Determination of influence of dirty filters on pressure drop in compressed air system, 14. International Scientific Conference on Industrial Systems - IS, Novi Sad: Fakultet tehničkih nauka, Departman za industrijsko inženjerstvo i menadžment, Novi Sad, 2-3 Oktobar, 2008, pp. 160-166, ISBN 978–86–7892–135-3
() Report from the international meeting printed in its entirety
Ignjatović I., Šešlija D.: Primena inženjerskih alata za povećanje energetske efikasnosti u aplikacijama sa vakuum sisaljkama, 10. ICDQM, Beograd: Research Center of Dependability and Quality Management-DQM, 13-14 Jun, 2007, pp. 843-849, UDK: 658.56
() Report from the international meeting printed in its entirety
Ignjatović I., Šešlija D.: Engineering tools as a support in suction cups applications in order to increase energy efficiency, 2. South East European Doctoral Student Conference-DSC, Thessaloniki: South East European Research Centre, Thessaloniki, Greece, 22-23 Jun, 2007, ISBN 978-960-89629-5-8
() Chapter in the M41 or research in the prominent thematic collection of the leading national importance
Ćosić I., Šešlija D., Ignjatović I.: Razvoj obrazovanja industrijskih inženjera, Beograd, Ekonomski institut, 2011, str. 19-45, ISBN 978-86-7329-086-7
() Research published in the leading journal of the national importance
Dudić S., Šešlija D., Stojiljković M., Blagojević V., Ignjatović I.: Influence of piston rod clamping unit on increased energy efficiency of compressed air systems, Facta universitatis - series: Mechanical Engineering, 2012, Vol. 9, No 2, pp. 161-168, ISSN 0354–2025, UDK: 621.542
() Research published in the leading journal of the national importance
Ignjatović I., Šešlija D., Dudić S.: Increasing energy efficiency of compressed air usage for sustainable production of food and beverage, Acta Technica Corviniensis, 2011, Vol. 4, No 2, pp. 61-65, ISSN 2067-3809
() Research published in the scientific journal
Reljić V., Bajči B., Milenković I., Šulc J., Šešlija D., Dudić S.: Development of an Experimental Setup for Remote Testing of Pneumatic Control, International Journal of Online Engineering (iJOE), 2018, Vol. 14, No 1, pp. 195-202, ISSN 1861-2121
() Research published in the scientific journal
Šešlija D., Dudić S., Milenković I.: Cost effectiveness analysis of pressure regulation method on pneumatic cylinder circuit, International Energy Journal, 2017, Vol. 12, No 2, pp. 89-98, ISSN 1513-718X
() Research published in the scientific journal
Šulc J., Šešlija D., Dudić S., Milenković I.: Remote Laboratory for Measuring Linear Dimensions in the Process of E-Learning, International Journal of Online Engineering (iJOE), 2016, Vol. 12, No 4, ISSN 1861-2121
() Report from the meeting of the national importance printed in its entirety
Ignjatović I., Tarjan L., Dudić S., Šešlija D.: Ispitivanje dometa bežičnog sistema za nadzor stanja filterskih uložaka u pneumatskim sistemima, 9. Infoteh, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, Srpsko Sarajevo, Republika Srpska, 17-19 Mart, 2010, pp. 317-320, ISBN 99938-624-2-8
() Report from the meeting of the national importance printed in its entirety
Anišić Z., Šešlija D., Lalić B., Ignjatović I., Gečevska V., Veža I.: Development of joint master studies for product lifecycle management, 16. Skup "Trendovi razvoja" - TREND, Kopaonik: Fakultet tehničkih nauka, Novi Sad, 1-4 Mart, 2010, pp. 312-318, ISBN 978-86-7892-236-7
() Report from the meeting of the national importance printed in its entirety
Ignjatović I., Tarjan L., Lekić N., Šešlija D.: Bežična razmena podataka o detekciji zaprljanosti u pneumatskim sistemima, 32. Kongres o hidropneumatičkoj automatizaciji - HIPNEF, Vrnjačka Banja: Mašinski fakultet, Univerzitet u Nišu, 14-16 Oktobar, 2009, pp. 107-112, ISBN 978-86-81505-48-9
() Report from the meeting of the national importance printed in its entirety
Ignjatović I., Tarjan L., Dudić S., Šešlija D.: Primena bežičnih tehnologija za nadzor kvaliteta vazduha pod pritiskom, 8. Infoteh, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, Srpsko Sarajevo, Republika Srpska, 18-20 Mart, 2009, pp. 572-575, ISBN 99938-624-2-8
() Report from the meeting of the national importance printed in its entirety
Ignjatović I., Šešlija D., Golubović Z., Stojiljković M.: Odit pneumatskih sistema – prvi korak ka povećanju energetske efikasnosti, 21. PROCESING, Subotica: Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije, 4-6 Jun, 2008
() Report from the meeting of the national importance printed in its entirety
Ignjatović I., Dudić S., Šešlija D., Slavković B.: Optimizacija rada i povećanje energetske efikasnosti paletizera, 31. Kongres o hidropneumatičkoj automatizaciji - HIPNEF, Vrnjačka Banja: Mašinski fakultet, Univerzitet u Nišu, 15-17 Oktobar, 2008, pp. 153-158, ISBN 978-86-80587-87-5
() Report from the meeting of the national importance printed in its entirety
Dudić S., Ignjatović I., Šešlija D., Golubović Z., Slavković B.: Kvantifikacija gubitaka vazduha pod pritiskom na manipulatoru staklenih boca, 31. Kongres o hidropneumatičkoj automatizaciji - HIPNEF, Vrnjačka Banja: Mašinski fakultet, Univerzitet u Nišu, 15-17 Oktobar, 2008, pp. 147-152, ISBN 978-86-80587-87-5
() Report from the meeting of the national importance printed in its entirety
Dudić S., Šešlija D., Ignjatović I.: Uticaj primene modula za blokiranje položaja klipnjače cilindra na energetsku efikasnost pneumatskih sistema, 31. Kongres o hidropneumatičkoj automatizaciji - HIPNEF, Vrnjačka Banja: Mašinski fakultet, Univerzitet u Nišu, 15-17 Oktobar, 2008, pp. 141-146, ISBN 978-86-80587-87-5
() Report from the meeting of the national importance printed in its entirety
Šešlija D., Ignjatović I.: Programiranje delotvornog angažovanja primenjenih i razvojnih naučnih istraživanja u funkciji generisanja razvojnih ideja
() Prototype, new methods, software, standardized and certified instrument
Šešlija D., Ignjatović I., Tarjan L., Lekić N.: Informacioni model za povezivanje filtera za vazduh pod pritiskom i bežičnog komunikacionog uređaja, 2010
() Realized patent, breed, sort or race, architectural, civil and urban original work
Šešlija D., Ignjatović I., Tarjan L., Lekić N.: Bežični sistem nadzora stanja filterskih uložaka u pneumatskim sistemima; Broj malog patenta: RS1159 U, Novi Sad, Zavod za intelektualnu svojinu, Beograd, 2010
() Realized patent, breed, sort or race, architectural, civil and urban original work
Šešlija D., Ignjatović I., Tarjan L., Marković J.: Integrisani uređaj za daljinski nadzor pada pritiska na filterima vazduha pod pritiskom sa upotrebom dva manometra; Broj malog patenta: RS1233 U, Novi Sad, Zavod za intelektualnu svojinu, Beograd, 2011
