() Research published in the top international journal
Pál (Apro) M., Novaković D., Dedijer S., Koltai L., Jurič (Rilovski) I., Vladić G., Kašiković N.: Image processing based quality control of coated paper folding, Measurement, 2017, Vol. 100, pp. 99-109, ISSN 0263-2241, UDK: http://dx.doi.org/10.1016/j.measurement.2016.12.033
() Research published in the top international journal
Tomić I., Dedijer S., Novaković D., Jurič (Rilovski) I.: Artificial neural networks for optimising camera‐based colour measurements of prints enhanced with pearlescent pigments, Coloration Technology, 2018, Vol. 134, No 5, pp. 364-372, ISSN 1472-3581
() Research published in the prominent international journal
Pál (Apro) M., Novaković D., Pál S., Dedijer S., Milić N.: Colour Space Selection for Entropy-based Image Segmentation of Folded Substrate Images, Acta Polytechnica Hungarica, Journal of Applied Sciences, 2013, Vol. 10, No 1, pp. 43-62, ISSN 1785-8860
() Research published in the international journal
Novaković D., Dedijer S., Poljaček- Mahović S.: A model for improving the flexographic printing plate making process, original scientific paper, Tehnicki vjesnik - Technical Gazette, 2010, Vol. 17, No 4, pp. 403-410, ISSN 1330-3651, UDK: 655.22:621.78
() Research published in the international journal
Tomić I., Dedijer S., Martínez-Canada P., Novaković D., Hladnik A.: Camera Characterization for Colorimetric Assessment of Goniochromatic Prints, Journal of Imaging Science and Technology, 2017, Vol. 61, No 2, pp. 1-15, ISSN 1062-3701
() Research published in the international journal
Pavlović Ž., Dedijer S., Kašiković N., Novaković D., Pál (Apro) M., Risović D.: Evaluation of effective models of offset CTP plate aluminium oxide surface roughness characterisation, International Journal of Surface Science and Engineering, 2017, Vol. 11, No 5, pp. 433-449, ISSN 1749-7868
() Research published in the international journal
Bozhkova T., Boeva R., Spiridonov I., Sapkota J., Nedelchev Y., Kašiković N., Dedijer S., Pál (Apro) M.: Improvement of physical-mechanical and optical properties of the packaging production through coating with aqueous polymer dispersions in accordance with the environmental protection requirements, Bulgarian Chemical Communications, 2017, Vol. 49, No L, pp. 169-173, ISSN 0324-1130
() Research published in the international journal
Dedijer S., Pál (Apro) M., Boeva R., Spiridonov I., Bozhkova T., Zorić V., Zeljković Ž.: Characterization of flexo and letterpress printing plate’s surface roughness by indirect SEM image-based profilometry, Bulgarian Chemical Communications, 2017, Vol. 49, No L, pp. 148-157, ISSN 0324-1130
() Research published in the international journal
Dedijer S., Tomić I., Spiridonov I., Boeva R., Jurič (Rilovski) I., Milić N., Đurđević S.: Ink - jet imprints in just noticeable color difference evaluation, Bulgarian Chemical Communications, 2017, Vol. 49, No L, pp. 140-147, ISSN 0324-1130
() Research published in the international journal
Kašiković N., Vladić G., Milić N., Novaković D., Milošević R., Dedijer S.: Colour fastness to washing of multi-layered digital prints on textile materials, Journal of the National Science Foundation of Sri Lanka, 2018, Vol. 46, No 3, pp. 381-391, ISSN 1391-4588
() Report from the international meeting printed in its entirety
Tomić I., Dedijer S., Jurič (Rilovski) I., Pál (Apro) M.: The Effect of Scanning Resolution and Displacement Value on the GLCM-Based Features for Paper Texture Characterization, 8. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department of Graphic Engineering and Design, 3-4 Novembar, 2016, pp. 263-271, ISBN 978-86-78928-67-3
() Report from the international meeting printed in its entirety
Dedijer S., Tomić I., Pál (Apro) M., Pavlović Ž., Jurič (Rilovski) I.: Color Reproduction Quality in Multi-Pass Ink Jet Printing, 8. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department of Graphic Engineering and Design, 3-4 Novembar, 2016, pp. 225-230, ISBN 978-86-78928-67-3
() Report from the international meeting printed in its entirety
Dedijer S., Pál (Apro) M., Pavlović Ž., Vladić G., Novaković D.: Possibilites of Flexo Printing Plate Elements Characterisation by Image Processing, 5. International Joint Conference on Environmental and Light Industry Technologies, Budimpešta: Obuda University, 19-20 Novembar, 2015, pp. 82-91, ISBN 978-615-5460-60-9
() Report from the international meeting printed in its entirety
Pál (Apro) M., Dedijer S., Tomić I., Jurič (Rilovski) I., Zorić V.: Influence of sample-size variations on the in-plane tensile strength of uncoated paper, 8. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department of Graphic Engineering and Design, 3-4 Novembar, 2016, pp. 109-114, ISBN 978-86-78928-67-3
() Report from the international meeting printed in its entirety
Dedijer S., Pál (Apro) M., Pavlović Ž., Novaković D.: Surface roughness analysis of conventional flexo printing plate in dependence of developing and light finishing phase, 1. Wood, Pulp & Paper, Polygrafia Academica 2014, Bratislava: Slovak University of Technology, Faculty of Chemical and Food Technology, 12-13 Mart, 2014, pp. 101-106, ISBN 978-80-89597-16-1
() Report from the international meeting printed in its entirety
Dedijer S., Pavlović Ž., Pál (Apro) M., Šušić N.: Surface roughness factors of flexo printed solid areas on aluminium foil and characterisation of UCA, 5. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Faculty of technical sciences, Graphic engineering and design, 11-12 Novembar, 2010, pp. 45-52, ISBN 978-86-7892-294-7
() Report from the international meeting printed in its entirety
Tomić I., Dedijer S., Jurič (Rilovski) I., Pál (Apro) M., Pavlović Ž., Vladić G.: Influence of Resolution and Print Settings on Colour Reproduction in Ink-Jet Printing, 2. 2nd International Printing Technologies Symposium – PrintIstanbul 2017, Istanbul: Marmara University, 11-12 Oktobar, 2017, pp. 273-282, ISBN 978-9944-0636-7-8
() Report from the international meeting printed in its entirety
Vladić G., Novaković D., Kašiković N., Milić N., Dedijer S.: THE USE OF MODERN INFORMATION TECHNOLOGIES IN THE EDUCATIONAL PROCESS OF GRAPHIC ENGINEERS AND DESIGNERS, 8. International Scientific Conference Research and development of mechanical elements and systems - IRMES, Trebinje: University of Montenegro, Faculty of Mechanical Engineering, 7-9 Septembar, 2017, pp. 297-300, ISBN 978-9940-527-53-2
() Report from the international meeting printed in its entirety
Žarko J., Novaković D., Vladić G., Pál (Apro) M., Dedijer S.: Embossing Tools Production Using FDM 3D Printing Technology, 5. International Joint Conference on Environmental and Light Industry Technologies, Budimpešta: Obuda University, 19-20 Novembar, 2015, pp. 1-10, ISBN 978-615-5460-60-9
() Report from the international meeting printed in its entirety
Dedijer S., Pál (Apro) M., Pavlović Ž., Novaković D.: Čitljivost 2D bar kodova štampanih na različitim papirnim podlogama, 10. Conference of Chemists, Technologists and Environmentalists of Republic of Srpska, Banja Luka: Univerzitet u Banjoj Luci, Tehnološki fakultet, 15-16 Novembar, 2013, pp. 501-512, ISBN 978-99938-54-50-0
() Report from the international meeting printed in its entirety
Đokić M., Pavlović Ž., Kavčič U., Dedijer S., Tadeja M.: Uticaj procesa sušenja na otpornost RFID komponenti štampanih funkcionalnom provodnom bojom, 10. Conference of Chemists, Technologists and Environmentalists of Republic of Srpska, Banja Luka: Univerzitet u Banjoj Luci, Tehnološki fakultet, 15-16 Novembar, 2013, pp. 501-512, ISBN 978-99938-54-50-0
() Report from the international meeting printed in its entirety
Tomić I., Novaković D., Gebeješ A., Hladnik A., Dedijer S.: Determining Color of Goniochromatic Prints using DSLR Camera, 5. International Joint Conference on Environmental and Light Industry Technologies, Budimpešta, 19-20 Novembar, 2015, pp. 104-112, ISBN 978-615-5460-60-9
() Report from the international meeting printed in its entirety
Dedijer S., Pavlović Ž., Pál (Apro) M., Novaković D.: Comparative analysis of tone value reproduction using different film making technologies, 8. Sigt - 7th Symposium of Information and Graphic Arts Technology, Ljubljana: of Natural Sciences and Engineering, Department of Textiles, Chair of Information and Graphic Art Technology, 5-6 Jun, 2014, pp. 76-80, ISBN 978-961-6900-09-6
() Report from the international meeting printed in its entirety
Pál (Apro) M., Koltai L., Dedijer S., Draganov S., Đokić M.: Instrumental investigation of fold-crack resistance of coated papers, 7. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Faculty of Technical Sciences, Department of Graphic Engineering and Design, 13-14 Novembar, 2014, pp. 183-190, ISBN 978-86-7892-645-7
() Report from the international meeting printed in its entirety
Dedijer S., Pál (Apro) M.: COMPARATIVE STUDY OF LINE AND DOT ELEMENTS REPRODUCTION ON FLEXO PRINTING PLATES USING DIFFERENT FILM MAKING TECHNOLOGIES, 7. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Faculty of Technical Sciences, Department of Graphic Engineering and Design, 13-14 Novembar, 2014, pp. 77-85, ISBN 978-86-7892-645-7
() Report from the international meeting printed in its entirety
Pál (Apro) M., Novaković D., Pavlović Ž., Dedijer S.: Influence of the scanning resolution on image segmentation accuracy for an objective fold cracking evaluation, 11. Seminar in Graphic Arts, Pardubice: University of Pardubice, Department of Graphic Arts and Photophysics, 17-18 Jun, 2013, pp. 138-143
() Report from the international meeting printed in its entirety
Pavlović Ž., Dedijer S., Pál (Apro) M., Cigula T.: Influence of the pad printing plate‘ printing element depth on the quality of the printed product, 11. Seminar in Graphic Arts, Pardubice: University of Pardubice, Department of Graphic Arts and Photophysics, 2013, 17-18 Jun, 2013, pp. 151-156, ISBN 978-80-7395-459
() Report from the international meeting printed in its entirety
Pál (Apro) M., Dedijer S., Pavlović Ž., Đerić A.: Analiza lepljenih spojeva transportnih kutija od talasastih lepenki, 18. Međunarodni simpozijum iz oblasti celuloze, papira, ambalaže i grafike, Zlatibor: Tehnološko-metalurški fakultet Univerziteta u Beogradu, Centar celulozno-papirne, ambalažne i grafičke industrije Srbije, 19-22 Jun, 2012, pp. 61-66, ISBN 978-86-7401-283-3
() Report from the international meeting printed in its entirety
Milić N., Dedijer S., Pál (Apro) M., Pavlović Ž.: The statistical analysis of processing conditions’ influence on the surface roughness of flexo printing plate , 6. International Symposium on Graphic Engineering and Design, GRID, Novi Sad, 15-16 Novembar, 2012, pp. 141-150, ISBN 987-86-7892-457-6
() Report from the international meeting printed in its entirety
Pál (Apro) M., Koltai L., Novaković D., Dedijer S., Draganov S.: Characterisation of fold-crack resistance of coated papers by tensile and Mullen burst test, 6. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Fakultet Tehničkih Nauka, 15-16 Novembar, 2012, pp. 311-316, ISBN 978-86-7892-457-6
() Report from the international meeting printed in its entirety
Dedijer S., Cigula T., Novaković D., Gojo M.: The contact angle of reference liquids on flexographic printing plates as a function of time, 6. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department for Graphic Engineering and Design, 15-16 Novembar, 2012, pp. 121-128, ISBN 978-86-7892-457-6
() Report from the international meeting printed in its entirety
Pál (Apro) M., Sadžakov M., Pavlović Ž., Dedijer S.: Karakterizacija ofset štampe na recikliranim kartonima, 17. International Symposium in the Field of Pulp, Paper, Packaging and Graphics, Zlatibor: Tehnološko-metalurški fakultet Univerziteta u Beogradu, Centar celulozno-papirne, ambalažne i grafičke industrije Srbije, 21-24 Jun, 2010, pp. 177-180, ISBN 978-86-7401-267-3
() Report from the international meeting printed in its entirety
Pavlović Ž., Pál (Apro) M., Dedijer S., Novaković D.: Opseg boja u rotacionoj heat-set ofset štampi u zavisnosti od sastava sredstva za vlaženje, 17. International Symposium in the Field of Pulp, Paper, Packaging and Graphics, Zlatibor: Tehnološko-metalurški fakultet Univerziteta u Beogradu, Centar celulozno-papirne, ambalažne i grafičke industrije Srbije, 21-24 Jun, 2010, pp. 181-184, ISBN 978-86-7401-267-3
() Report from the international meeting printed in its entirety
Dedijer S., Pál (Apro) M., Pavlović Ž., Cigula T., Obrenović B.: Influence of ink solvent concentration on wetting of flexo printing plate and PE foil, 2. International Joint Conference on Environmental and Light Industry Technologies, Budimpešta: Rejtő Sándor Faculty of Light Industry and Environmental Engineering, 21-22 Novembar, 2011, pp. 143-150, ISBN 978-615-5018-23-7
() Report from the international meeting printed in its entirety
Pál (Apro) M., Dedijer S., Pavlović Ž.: Profilometric analysis of foil laminated papers, 5. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Fakultet tehničkih nauka, 11-12 Novembar, 2010, pp. 77-82, ISBN 978-86-7892-294-7
() Report from the international meeting printed in its entirety
Pál (Apro) M., Novaković D., Dedijer S., Pavlović Ž., Karlović I.: Micro-topography analysis of foil laminated papers, 1. International Joint Conference on Environment and Light Industry Technologies, Budimpešta: Rejtő Sándor Faculty of Light Industry and Environmental Engineering, 18-19 Novembar, 2010, pp. 173-180, ISBN 978-615-5018-08-4
() Report from the international meeting printed in its entirety
Šušić N., Dedijer S., Avramović D.: Influence of ink viscosity on print quality and gloss in gravure printing , 5. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Faculty of technical sciences, Graphic engineering and design, 11-12 Novembar, 2010, pp. 295-298, ISBN 978-86-7892-294-7
() Report from the international meeting printed in its entirety
Karlović I., Tomić I., Dedijer S., Pál (Apro) M., Novaković D.: The correlation of surface roughnes parameters of print enhancement foils and optical and colourimetric properties of offset prints, 1. International Joint Conference on Environment and Light Industry Technologies, Budimpešta: Rejto Sándor Faculty of Light Industry and Environmental Engineering, Óbuda University., 18-19 Novembar, 2010, pp. 181-188, ISBN 978-615-5018-08-4
() Report from the international meeting printed in its entirety
Dedijer S., Novaković D.: Determination of surface roughness factors of solid printing areas on different flexo printing plates, 5. International Symposium on Novelties in Graphics, Ljubljana, 27-29 Maj, 2010, pp. 806-812, ISBN 978-961-6045-80-3
() Report from the international meeting printed in its entirety
Novaković D., Karlović I., Pavlović Ž., Dedijer S.: Colorimetric and tone value differences in varnished samples of offset prints made with conventional and hybrid inks measured with different colour measuring devices, 12. "Blaž Baromić" International Conference on printing, design and graphic communications, Split: University of Zagreb, Faculty of Graphic Arts, Croatia, University of Ljubljana, Ogranak Matice Hrvatske Senje, Pulp and Paper Institute, Ljubljana, Slovenia, 21-24 Septembar, 2008, pp. 171-175, ISBN 987-953-96020-9-1
() Report from the international meeting printed in its entirety
Novaković D., Karlović I., Pavlović Ž., Pešterac Č., Dedijer S., Stipančevic T.: Computer to tone value analysis with different plate reader devices , 38. Simpozij o novostih v tekstilstvu in 3. Simpozij o novostih v grafiki, Ljubljana: Univerza v Ljubljani, Naravnoslovnotehniška fakulteta, Oddelek za tekstilstvo, 21 Jun, 2007, pp. 184-189, ISBN 978-961-6045-46-9
() Report from the international meeting printed in its entirety
Dedijer S., Novaković D., Karlović I., Pavlović Ž.: Analiza termalnih CTP ofset ploča i otisaka , 3. Naučno - stručni simpozijum GRID, Novi Sad: Fakultet tehničkih nauka, 16-18 Novembar, 2006, pp. 159-168, ISBN 86-7892-009-2
() Report from the international meeting printed in extracts
Pál (Apro) M., Novaković D., Dedijer S., Pavlović Ž., Kašiković N.: Preliminary Analysis of Image Segmentation Algorithms for an Objective Fold Cracking Evaluation, 15. International Conference on Printing, Design and Graphic Communications - Blaž Baromić, Senj: Croatian Society of Graphic Artists, Croatia, 16-19 Septembar, 2015, pp. 34-34
() Report from the international meeting printed in extracts
Dedijer S., Novaković D., Gužvica M., Pavlović Ž., Pál (Apro) M.: Evaluation of Pad Printed Electro Conductive Elements, 10. Seminar in Graphic Arts, Pardubice: University of Pardubice, Department of Graphic Arts and Photophysics, 19-21 Septembar, 2011, pp. 157-157, ISBN 978-80-7395-420-8
() Research published in the scientific journal
Žarko J., Vladić G., Pál (Apro) M., Dedijer S.: Influence of printing speed on production of embossing tools using FD M 3D printing technology, Journal of Graphic Engineering and Design, 2017, Vol. 8, No 1, pp. 19-27, ISSN 2217-379X
() Research published in the scientific journal
Dedijer S., Novaković D., Gužvica M., Pavlović Ž., Pál (Apro) M.: Some properties of pad printed electro conductive elements, Scientific papers of the University of Pardubice, Faculty of Chemical Technology, Seria A, 2012, Vol. 17, No Seria A, pp. 241-255, ISSN 1211-5541
() Research published in the scientific journal
Pavlović Ž., Dedijer S., Pál (Apro) M., Tomić I., Jurič (Rilovski) I.: Readability of screen printed QR codes depending on their dimension, encoded content and type of printing substrate using screen printing technique , Glasnik hemičara, tehnologa i ekologa Republike Srpske, 2016, Vol. 12, No 1, pp. 37-45, ISSN 1840-054X, UDK: 54+66+502/504
() Research published in the scientific journal
Nedić M., Novaković D., Dedijer S.: KONTROLA KVALITETA NOVINSKE ŠTAMPE U SKLADU SA ISO STANDARDOM, Zbornik radova Fakulteta tehničkih nauka, 2016, Vol. 31, No 5, pp. 982-985, ISSN 0350-428X, UDK: 655
() Research published in the scientific journal
Majstorović M., Dedijer S.: ANALIZA KVALITETA OTISAKA DOBIJENIH TAMPON TEHNIKOM ŠTAMPE NA OFSETNOJ PODLOZI, Zbornik radova Fakulteta tehničkih nauka, 2016, Vol. 31, No 4, pp. 593-596, ISSN 0350-428X, UDK: 655
() Research published in the scientific journal
Šišović Lj., Pavlović Ž., Dedijer S.: Analiza reprodukcije rasterskih elemenata na konvencionalnim flekso štamparskim formama primenom različitih kopirnih predložaka, Zbornik radova Fakulteta tehničkih nauka, 2015, Vol. 30, No 8, pp. 2657-2660, ISSN 0350-428X, UDK: 655
() Research published in the scientific journal
Prodić D., Pavlović Ž., Dedijer S.: Analiza kvaliteta otiska tampon štampe na različitim papirnim podlogama, Zbornik radova Fakulteta tehničkih nauka, 2014, Vol. 29, No 10, pp. 2190-2193, ISSN 0350-428X
() Research published in the scientific journal
Papić M., Novaković D., Dedijer S.: Ispitivanje promena površinske hrapavosti štampajućih elemenata punog tona na konvencionalnim flekso štamparskim formama, Zbornik radova Fakulteta tehničkih nauka, 2013, Vol. 28, No 10, pp. 1765-1768, ISSN 0350-428X, UDK: 655.3
() Research published in the scientific journal
Dedijer S., Novaković D., Pál (Apro) M., Pavlović Ž.: Statistical analysis of printing elements reproduction on thermally developed CTP flexo printing plates , Journal of Graphic Engineering and Design, 2012, Vol. 3, No 2, pp. 12-22, ISSN 2217-379X, UDK: 655.2.225.3:519.2.248
() Research published in the scientific journal
Dedijer S., Pál (Apro) M., Pavlović Ž., Cigula T., Obrenović B.: Flexographic ink composition and its wetting influence on flexo printing plate and printed substrate (PE FOIL), Papíripar, 2012, Vol. 56, No 4, pp. 24-30, ISSN 0031-1448
() Defended Doctoral dissertation
Dedijer S.: Razvoj modela procesne analize parametara izrade flekso štamparske forme, Novi Sad, Fakultet tehničkih nauka, Departman za grafičko inženjerstvo i dizajn, 2012
() Prototype, new methods, software, standardized and certified instrument
Novaković D., Pavlović Ž., Zeljković Ž., Nedeljković U., Dedijer S., Kašiković N., Vladić G., Pál (Apro) M., Avramović D., Pinćjer I., Milić N., Tomić I., Jurič (Rilovski) I., Đurđević S.: Softverski model za unapređenje znanja i proizvodnje u grafičkoj industriji, Tehničko rešenje, 2015
() Additional textbook for the course
Novaković, D., Dedijer, S., Vladić, G. Uvod u Grafičke tehnologije, praktikum za vežbe, Fakultet tehničkih nauka, GRID, Novi Sad, 2010, ISBN 978-86-7892-291-6
