Assoc. Prof. Siniša Bikić


Missing picture!

Siniša Bikić

Associate Professor


Telephone021/485-2397
E-mail
Academic titleAssociate Professor
Employee's biography not found!
Associate Professor
13.02.2019.
PositionFromToOrganizational unit
Assistant Professor13.02.2014.Chair of Fluid Mechanics and Hydro Systems
Assistant with PhD17.10.2013.01.01.2014.Department of Energy and Process Engineering
Assistant - Magister01.05.2008.01.10.2013.Department of Energy and Process Engineering
Intern Assistant16.06.2004.01.04.2008.Department of Energy and Process Engineering
TitleIn institution
Teorijske podloge i eksperimentalna istraživanja parovodenog injektora

Bachelor's thesis

Mechanical Engineering

Faculty of Technical Sciences

2003

Baždarenje mernih sistema za merenje protoka otpadnih voda

Magister thesis

Mechanical Engineering

Faculty of Technical Sciences

2007

Razvoj metode merenja protoka vazduha pomoću regulacione žaluzine

PhD thesis

Mechanical Engineering

Faculty of Technical Sciences

2013

Criterium of productionDescription
() Researches published in the journals of the international importanceBikić S., Uzelac D., Bukurov M., Todorović B., Tašin S.: Air torque position damper energy consumption analysis, Energy and Buildings, 2015, Vol. 99, No 2015, pp. 131-139, ISSN 0378-7788
() Research published in the top international journalCarletti C., Bikić S., Montante G., Paglianti A.: Mass transfer in dilute solid-liquid stirred tanks, Industrial & Engineering Chemistry Research, 2018, Vol. 57, No 18, pp. 6505-6515, ISSN 0888-5885
() Research published in the prominent international journalGaweł Ż., Fal ., Bikić S., Wanic M.: Ethylene glycol based silicon nitride nanofluids: an experimental study on thermophysical, electrical and optical properties, Physica E, 2018, Vol. 104, No Oktobar 2018, pp. 82-90, ISSN 1386-9477
() Research published in the prominent international journalBikić S., Uzelac D., Bukurov M., Radojčin M., Pavkov I.: Experimental calibration of the mathematical model of air torque position dampers with non-cascading blades, Thermal Science, 2016, Vol. 20, No 2, pp. 567-578, ISSN 0354-9836.
() Research published in the prominent international journalRadojčin M., Babić M., Babić Lj., Pavkov I., Bukurov M., Bikić S., Mitrevski V.: Effects of osmotic pretreatment on quality and physical properties of dried quinces (Cydonia oblonga), Journal of Food and Nutrition Research, 2015, Vol. 54, No 2, ISSN 1336-8672
() Research published in the prominent international journalRužić D., Bikić S.: An Approach To Modelling A Virtual Thermal Manikin, Thermal Science, 2014, Vol. 18, No 4, pp. 1413-1423, ISSN 0354-9836
() Research published in the prominent international journalBukurov M., Bikić S., Prica M.: The Efficiency Rate of a Steam-Water Injector, Acta Polytechnica Hungarica, Journal of Applied Sciences, 2012, Vol. 9, No 5, pp. 107-126, ISSN 1785-8860
() Research published in the international journalGlavčić Z., Bikić S., Bulatović R.: Optimization of Swirling Flow Energy Parameters on the Velocity Profile after Local Obstacle by Firefly Algorithm, Journal of Applied Fluid Mechanics, 2018, Vol. 10, No 2, pp. 479-489, ISSN 1735-3572
() Research published in the international journalBikić S., Todorović B., Bukurov M., Radojčin M., Pavkov I.: Accuracy analysis of air torque position dampers based on blade profiles and damper locations, Thermal Science, 2018, Vol. 22, No 1B, pp. 675-685, ISSN 0354-9836
() Research published in the international journalUzelac D., Bikić S., Đurđević M., Bordeasu I.: Change in the Depth of Scratch on the Polyethylene Gas Pipe after Squeezing with the Squeeze - off Tool, Materiale Plastice, 2011, Vol. 48, No 1, pp. 12-16, ISSN 0025-5289
() Research published in the international journalUzelac D., Bikić S., Đurđević M.: Change of polyethylene pipe wall thickness after squeezing using squeeze tool, Materiale Plastice, 2010, Vol. 47, No 4, pp. 461-466, ISSN 0025-5289
() Report from the international meeting printed in its entiretyBikić S., Bukurov M.: Calibration of ATP damper’s mathematical model by CFD simulation Conference on Modelling Fluid Flow (CMFF’15), 16. International Conference on Fluid Flow Technologies, Budimpešta: Budapest University of Technology and Economics, Department of Fluid Mechanics, 1-4 Septembar, 2015
() Report from the international meeting printed in extractsCarletti C., Bikić S., Paglianti A., Montante G.: Experimental analysis of solids dissolution in stirred vessels of different sizes by electrical resistance tomography, 10. World congress of chemical engineering - WCCE, Barselona, 1-5 Oktobar, 2017
() Report from the international meeting printed in extractsBikić S., Bukurov M., Despotović B., Marković B., Pavkov I.: ACCURACY ANALYSIS OF ATP DAMPERS BASED ON BLADE PROFILES BY USING OF CFD,, 5. International Conference Sustainable Postharvest and Food Technologies INOPTEP and National Conference Processing and Energy in Agriculture PTEP, Vršac: Nacionalno društvo za procesnu tehniku i energetiku u poljoprivredi, Novi Sad, 23-28 April, 2017
() Prototype, new methods, software, standardized and certified instrumentBikić S., Uzelac D., Bukurov M., Todorović B., Marković B., Pavkov I., Radojčin M.: ATP damper za merenje protoka vazduha, Tehničko rešenje, 2015
TitleScientific areaHigher education institutionElection date
Associate ProfessorMehanika fluida, hidropneumatska, gasna i naftna tehnikaFaculty of Technical Sciences13.02.2019.
Assistant ProfessorMehanika fluida, hidropneumatska, gasna i naftna tehnikaFaculty of Technical Sciences13.02.2014.
AssistantApplied Fluid Mechanics - Hydro Pneumatic Technics27.04.2011.
LecturerApplied Fluid Mechanics - Hydro Pneumatic TechnicsFaculty of Technical Sciences11.06.2009.
AssistantApplied Fluid Mechanics - Hydro Pneumatic TechnicsFaculty of Technical Sciences17.04.2008.
Intern AssistantMehanika fluidaFaculty of Technical Sciences16.06.2004.