doc. dr Pal Terek


Nedostaje slika

dr Pal Terek

Docent


Telefon021/485-2330
E-mail
Akademsko zvanjeDocent
KancelarijaKabinet 013A

Pal Terek je master studije Proizvodnog mašinstva završio na Fakultetu tehničkih nauka, Univerzitet u Novom Sadu, Novi Sad. U periodu između 2008. i 2016. godine zaposlen je kao istraživač na projektu a tokom 2016. godine kao asistent master na Fakultetu tehničkih nauka na Departmanu za proizvodno mašinstvo. Kao asistent održavao je nastavu iz predmeta inženjerstvo površina, termička obrada, tehnologije livenja i sprovodio je istraživanja u oblasti primene i karakterizacije prevlaka otpornih na habanje namenjenih za primenu na različitim vrstama alata za obradu metala. Tokom godina je u više poseta kao gostujući istraživač boravio na Institutu „Jožef Stefan„ Ljubljana, Slovenija gde je sprovodio istraživanja u oblasti tvrdih prevlaka. 2016. godine odbranio je doktorsku disertaciju na Univerzitetu u Novom Sadu, iz oblasti Mašinsko inženjerstvo. Od Aprila 2017. godine izabran je u zvanje docenta na Univerzitetu u Novom Sadu i zaposlen je na Fakultetu tehničkih nauka na Departmanu za proizvodno mašinstvo gde predaje na Katedri za tehnologije oblikovanjem i inženjerstvo površina.

Docent
01.04.2017.
Radno mestoOdDoOrganizaciona jedinica
Istraživač saradnik25.05.2011.01.12.2015.Departman za proizvodno mašinstvo
Istraživač pripravnik04.06.2008.01.05.2011.Departman za proizvodno mašinstvo
Asistent sa doktoratom21.09.2016.Katedra za tehnologije oblikovanja materijala i inženjerstvo površina
Asistent-Master01.01.2016.01.09.2016.Katedra za tehnologije oblikovanja materijala i inženjerstvo površina
NazivU Ustanovi
Primena racunara i eksperimentalnih istraživanja za rešavanje problematike poroznosti Al-Si-Cu odlivaka

Diploma

Mašinsko inženjerstvo

Fakultet tehničkih nauka

2007

Unapređenje kvaliteta alata za livenje pod pritiskom primenom tehnologija inženjerstva površina

Doktorat

Mašinsko inženjerstvo

Fakultet tehničkih nauka

2016

Kriterijum produkcijeOpis
(M21a) Rad u međunarodnom časopisu izuzetnih vrednostiKovačević L., Terek P., Kakaš D., Miletić A.: A correlation to describe interfacial heat transfer coefficient during solidification of Al–Si alloy casting, Journal of Materials Processing Technology, 2012, Vol. 212, No 9, pp. 1856-1861, ISSN 0924-0136
(M21) Rad u vrhunskom međunarodnom časopisuTerek P., Kovačević L., Miletić A., Škorić B., Kovač J., Drnovšek A.: Metallurgical Soldering of Duplex CrN Coating in Contact with Aluminum Alloy, Coatings, 2020, Vol. 10, No 3, pp. 303-320, ISSN 2079-6412
(M21) Rad u vrhunskom međunarodnom časopisuTerek P., Kovačević L., Miletić A., Kukuruzović D., Baloš S., Škorić B.: Improved ejection test for evaluation of soldering tendency of cast alloy to die core materials, Journal of Materials Processing Technology, 2019, Vol. 266, pp. 114-124, ISSN 0924-0136
(M21) Rad u vrhunskom međunarodnom časopisuTerek P., Kovačević L., Miletić A., Panjan P., Baloš S., Škorić B., Kakaš D.: Effects of die core treatments and surface finishes on the sticking and galling tendency of Al–Si alloy casting during ejection, Wear, 2016, Vol. 356, pp. 122-134, ISSN 0043-1648
(M22) Rad u istaknutom međunarodnom časopisuKakaš D., Kovačević L., Terek P., Krumes D., Kolumbić Z.: Use of SEM and EDS analysis in the investigation of Al-Si-Cu piston alloy cast porosity, Metalurgija, 2009, Vol. 48, No 3, pp. 171-174, ISSN 0543-5846, UDK: 669+621.7+51/54(05)=163.42=111
(M22) Rad u istaknutom međunarodnom časopisuKovačević L., Terek P., Miletić A., Kakaš D.: Dependence of interfacial heat transfer coefficient on casting surface temperature during solidification of Al–Si alloy castings cast in CO2 sand mold, Heat and Mass Transfer, 2014, Vol. 50, No 8, pp. 1115-1124, ISSN 0947-7411
(M22) Rad u istaknutom međunarodnom časopisuKakaš D., Terek P., Miletić A., Kovačević L., Vilotić M., Škorić B.: Friction and wear of low temperature deposited TiN coating sliding in dry conditions at various speeds, Tehnicki vjesnik - Technical Gazette, 2013, Vol. 20, No 1, pp. 27-33, ISSN 1330-3651
(M22) Rad u istaknutom međunarodnom časopisuKovačević L., Terek P., Miletić A., Kukuruzović D., Škorić B., Panjan P.: Industrial evaluation of duplex PVD hard coatings for HPDC, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018, Vol. 40, No 5, pp. 271-271, ISSN 1678-5878
(M23) Rad u međunarodnom časopisuMiletić A., Terek P., Kovačević L., Vilotić M., Kakaš D., Škorić B., Kukuruzović D.: Influence of substrate roughness on adhesion of TiN coatings, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2014, Vol. 36, No 2, pp. 293-299, ISSN 1678-5878
(M23) Rad u međunarodnom časopisuInfluence of interfacial layer thickness and substrate roughness on adhesion of TiN coatings deposited at low temperatures by IBAD, Kakas, D., Terek, P., Kovacevic, L. , Miletic, A., Skoric, B. , Surface Review and Letters Volume 18, Issue 3-4, June 2011, Pages 83-90
(M24) Rad u časopisu međunarodnog značaja verifikovanog posebnom odlukomTerek P., Kovačević L., Miletić A., Kukuruzović D., Škorić B., Drnovšek A., Panjan P.: Ejection performance of coated core pins intended for application on high pressure die casting tools for aluminium alloys processing, Tribology in Industry, 2017, Vol. 39, No 3, pp. 334-339, ISSN 0354-8996
(M24) Rad u časopisu međunarodnog značaja verifikovanog posebnom odlukomKakaš D., Škorić B., Terek P., Miletić A., Kovačević L., Vilotić M.: Mechanical Properties of TiN Coatings Deposited at Different Temperatures by IBAD Process, FME Transactions, 2012, Vol. 40, No 1, pp. 37-42, ISSN 1451-2092
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKovačević L., Terek P., Miletić A., Kukuruzović D., Škorić B.: Influence of computational grid density on results of casting simulation, 13. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, 28-29 Septembar, 2018, pp. 245-248, ISBN 978-86-6022-094-5
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKukuruzović D., Terek P., Kovačević L., Škorić B., Baloš S., Panjan P., Čekada M., Miletić A.: Estimation of soldering tendency of Al-alloy toward CrAlN as a candidate coating for HPDC tools, 13. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, 28-29 Septembar, 2018, pp. 249-252, ISBN 978-86-6022-094-5
(M33) Saopštenje sa međunarodnog skupa štampano u celiniMiletić A., Panjan P., Čekada M., Terek P., Kovačević L., Škorić B.: Mechanical and tribological properties of industrially prepared TiAlN hard ceramic coatings, 13. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, 28-29 Septembar, 2018, pp. 253-256, ISBN 978-86-6022-094-5
(M33) Saopštenje sa međunarodnog skupa štampano u celiniTerek P., Kovačević L., Miletić A., Kukuruzović D., Škorić B., Drnovšek A., Panjan P.: Cast alloy soldering tendency and corrosion resistance of duplex PVD coatings for application on die casting tools for aluminum alloys processing, 60. Annual Technical Conference - SVC TechCon, Providence: Society of vacuum coaters, 29-4 April, 2017, pp. 1-6
(M33) Saopštenje sa međunarodnog skupa štampano u celiniTerek P., Kovačević L., Miletić A., Kukuruzović D., Škorić B., Drnovšek A., Panjan P.: Ejection performance of coated core pins intended for application on die casting tools for aluminium alloys procesing, 15. International Conference on Tribology - SERBIATRIB, Kragujevac: Serbian Tribology Society, University of Kragujevac, Faculty of Engineering, 17-19 Maj, 2017, pp. 382-387, ISBN 978-86-6335-041-0
(M33) Saopštenje sa međunarodnog skupa štampano u celiniŠkorić B., Miletić A., Terek P., Kovačević L., Kukuruzović D.: Nano modification of hard coatings with ions, 4. International Scientific Conference on Advances in Mechanical Engineering - ISCAME, Debrecen: Department of Mechanical Engineering, Faculty of Engineering, University of Debrecen, Working Commission in Mechanical Engineering Specialized Committee in Engineering Regional Committee in Debrecen, Hungarian Academy of Sciences Hungary, 13-15 Oktobar, 2016, pp. 485-490, ISBN 978-963-473-917-3
(M33) Saopštenje sa međunarodnog skupa štampano u celiniŠkorić B., Miletić A., Terek P., Kovačević L., Kukuruzović D.: Nano modification of hard coatings with ions, 6. International Conference on Innovative Trends in Science, Engineering and Management - ICITSEM, Dubai, 1-2 Decembar, 2016, pp. 54-58, ISBN 978-963-473-917-3
(M33) Saopštenje sa međunarodnog skupa štampano u celiniTerek P., Kovačević L., Miletić A., Kukuruzović D., Škorić B., Kakaš D.: Improvement of Ejection Test Used for Evaluation of Soldering Tendency Between Casting and Die Materials, 2. Metallurgical and Materials Engineering Congress of South-East Europe - MME SEE, Beograd: Assicoation of Metallurgical Engineers Serbia, 3-5 Jun, 2015, pp. 239-245, ISBN 978-86-87183-27-8
(M33) Saopštenje sa međunarodnog skupa štampano u celiniTerek P., Kukuruzović D., Miletić A., Panjan P., Kovačević L., Škorić B.: Surface Roughness and Its Effect on Tribological Performance of Magnetron Sputtered Nitride Coatings, 14. International Conference on Tribology - SERBIATRIB, Beograd: Serbian Tribology Society, Faculty of Mechanical Engineering in Belgrade, 13-15 Maj, 2015, pp. 143-148, ISBN 978-86-7083-857-4
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKovačević L., Terek P., Miletić A., Kukuruzović D., Kakaš D.: Application of casting simulations in optimization of gating system with vertical runner extension, 12. International Scientific Conference "Flexible Technologies" - MMA, Andrevlje: University of Novi Sad, Faculty of technical sciences, 25-26 Septembar, 2015, ISBN 978-86-7892-722-5
(M33) Saopštenje sa međunarodnog skupa štampano u celiniŠkorić B., Miletić A., Kukuruzović D., Terek P.: Modication of Hard Coatings with Ion Beam, 4. International Congress on Natural Science and Engineering (ICNSE), Kyoto: Higher Education Forum (HEF), Taipei, Taiwan, 7-9 Maj, 2015, pp. 265-272, ISBN 978-986-87417-8-2
(M33) Saopštenje sa međunarodnog skupa štampano u celiniMiletić A., Terek P., Panjan P., Kovačević L., Kukuruzović D., Škorić B.: Mechanical and tribological properties of nanolayered TiAlN/TiSiN coating, 14. International Conference on Tribology - SERBIATRIB, Beograd: Serbian Tribology Society, Faculty of Mechanical Engineering in Belgrade, 13-15 Maj, 2015, pp. 137-142, ISBN 978-86-7083-857-4
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKovačević L., Terek P., Kakaš D., Miletić A., Kukuruzović D.: Determination of Metal-Mold Heat Transfer Coefficient During CO2 Sand Casting, 1. Metallurgical and Materials Engineering Congress of South-East Europe - MME SEE, Beograd: Association of metallurgical engineers of Serbia, 23-25 Maj, 2013, pp. 312-318, ISBN 978-86-87183-24-7
(M33) Saopštenje sa međunarodnog skupa štampano u celiniTerek P., Kovačević L., Miletić A., Kakaš D., Škorić B., Kukuruzović D.: Adhesion of Low Temperature Tin Coating Governed by Interfacial Layer Thickness and Surface Roughness, 1. Metallurgical and Materials Engineering Congress of South-East Europe - MME SEE, Beograd: Association of metallurgical engineers of Serbia, 23-25 Maj, 2013, pp. 154-160, ISBN 978-86-87183-24-7
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKovačević L., Terek P., Kakaš D., Miletić A., Kukuruzović D.: Determination of Metal-Mold Heat Transfer Coefficient During CO2 Sand Casting, 1. Metallurgical and Materials Engineering Congress of South-East Europe - MME SEE, Beograd: Association of metallurgical engineers of Serbia, 23-25 Maj, 2013, pp. 312-318, ISBN 978-86-87183-24-7
(M33) Saopštenje sa međunarodnog skupa štampano u celiniTerek P., Kovačević L., Miletić A., Kakaš D., Škorić B., Kukuruzović D.: Adhesion of Low Temperature Tin Coating Governed by Interfacial Layer Thickness and Surface Roughness, 1. Metallurgical and Materials Engineering Congress of South-East Europe - MME SEE, Beograd: Association of metallurgical engineers of Serbia, 23-25 Maj, 2013, pp. 154-160, ISBN 978-86-87183-24-7
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKukuruzović D., Berić J., Kakaš D., Škorić B., Terek P., Kovačević L., Miletić A., Vilotić M.: Application of a new device for measuring hard coatings thickness uniformity applied on large sized too, 11. International Scientific Conference "Advanced Production Technologies" - MMA, Novi Sad: Faculty of technical sciences, 20-21 Septembar, 2012, pp. 137-140, ISBN 978-86-7892-429-3
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKukuruzović D., Blagojević D., Kakaš D., Škorić B., Kovačević L., Terek P., Miletić A., Vilotić M.: The effects of cutting parameters and tool wear on the roughness of machined surface, 11. International Scientific Conference "Advanced Production Technologies" - MMA, Novi Sad: Faculty of technical sciences, 20-21 Septembar, 2012, pp. 141-144, ISBN 978-86-7892-429-3
(M33) Saopštenje sa međunarodnog skupa štampano u celiniVilotić M., Kakaš D., Terek P., Kovačević L., Kukuruzović D., Miletić A.: Severe Plastic Deformation by Compression, 11. International Scientific Conference "Advanced Production Technologies" - MMA, Novi Sad: Faculty of technical sciences, 20-21 Septembar, 2012, pp. 497-500, ISBN 978-86-7892-429-3
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKakaš D., Škorić B., Terek P., Kovačević L., Vilotić M., Miletić A.: Influence of sliding speed and surface roughness on the friction coefficient and wear TiN coatings deposited at low temperature, 12. International Conference on Tribology - SERBIATRIB, Kragujevac: Mašinski fakultet Kragujevac, 11-13 Maj, 2011, pp. 131-137, ISBN 978-86-86663-74-0
(M33) Saopštenje sa međunarodnog skupa štampano u celiniVilotić M., Kakaš D., Terek P., Kovačević L., Miletić A.: Neutral radius value determination by numerical simulation method at ring upsetting test, 12. International Conference on Tribology - SERBIATRIB, Kragujevac: Mašinski fakultet Kragujevac, 11-13 Maj, 2011, pp. 300-305, ISBN 978-86-86663-74-0
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKakaš D., Škorić B., Miletić A., Terek P., Kovačević L., Vilotić M.: Influence of substrate roughness on adhesion strength of hard TiN films , 34. International Conference on Production Engineering, Niš: Univerzitet u Nišu, Mašinski fakultet u Nišu Aleksandra Medvedeva br 14 18000 Niš Srbija, 28-30 Septembar, 2011, pp. 79-82, ISBN 978 – 86 – 6055 – 01
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKakaš D., Škorić B., Terek P., Miletić A., Kovačević L., Vilotić M.: Mechanical properties of TiN coatings deposited at different temperatures by IBAD, 34. International Conference on Production Engineering, Niš: Univerzitet u Nišu, Mašinski fakultet u Nišu Aleksandra Medvedeva br 14 18000 Niš Srbija, 28-30 Septembar, 2011, pp. 83-86, ISBN 978 – 86 – 6055 – 01
(M33) Saopštenje sa međunarodnog skupa štampano u celiniVilotić M., Kakaš D., Miletić A., Kovačević L., Terek P.: Influence of friction coefficient on workpiece roughness in ring upsetting process, 34. International Conference on Production Engineering, Niš: Univerzitet u Nišu, Mašinski fakultet u Nišu Aleksandra Medvedeva br 14 18000 Niš Srbija, 28-30 Septembar, 2011, pp. 527-530, ISBN 978 – 86 – 6055 – 01
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKakaš D., Škorić B., Terek P., Miletić A., Kovačević L., Vilotić M.: Influence of dry sliding conditions and coating roughness on the wear of titanium nitride coatings deposited at low temperature, 7. International Conference on Tribology - BALKANTRIB, Thessaloniki: Laboratory for Machine Tools and Manufacturing Engineering (EE??) of the Aristoteles University of Thessaloniki and of the Fraunhofer Project Center Coatings in Manufacturing (PCCM), 3-5 Oktobar, 2011, pp. 49-57, ISBN 987-960-98780-6-7
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKakaš D., Škorić B., Miletić A., Terek P., Kovačević L., Vilotić M.: Influence of substrate roughness on adhesion of TiN films prepared by ion beam assisted deposition, 9. International Conference in Manufacturing Engineering - THE "A" Coatings, Thessaloniki: Laboratory for Machine Tools and Manufacturing Engineering (EE??) of the Aristoteles University of Thessaloniki and of the Fraunhofer Project Center Coatings in Manufacturing (PCCM), 3-5 Oktobar, 2011, pp. 295-302, ISBN 978-960-98780-5-0
(M33) Saopštenje sa međunarodnog skupa štampano u celiniIvanišević A., Kačmarčik I., Terek P., Štrbac B.: NUMERICAL SIMULATION OF UPSETTING OF CYLINDER BY CONICAL DIE WITH EXPERIMENTAL TEST, 1. International Conference on Innovative Technologies IN-TECH, Prague, 14-16 Septembar, 2010, pp. 352-355, ISBN 978-80-904508-2-6
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKakaš D., Škorić B., Babić M., Mitrović S., Miletić A., Vilotić M., Terek P., Kovačević L.: Surface roughness and friction coefficient at IBAD deposited TiN hard coating, 11. International Conference on Tribology - SERBIATRIB, Beograd: Serbian Tribology Society, 13-15 Maj, 2009, pp. 145-148, ISBN 978-86-7083-659-4
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKakaš D., Škorić B., Miletić A., Vilotić M., Terek P., Kovačević L.: Investigation of micro and nano tribological phenomenon by EDX, 11. International Conference on Tribology - SERBIATRIB, Beograd: Serbian Tribology Society, 13-15 Maj, 2009, pp. 159-163, ISBN 978-86-7083-659-4
(M33) Saopštenje sa međunarodnog skupa štampano u celiniKakaš D., Kovačević L., Terek P.: Improvement of casting process control by computer simulation and experimental observation , 3. International Conference on Manufacturing Engineering - ICMEN, Chalkidiki: Aristoteles University of Thessaloniki and of the Fraunhofer Project Center Coatings in Manufacturing (PCCM), 1-3 Oktobar, 2008, pp. 273-279, ISBN 978-960-243-649-3
(M34) Saopštenje sa međunarodnog skupa štampano u izvoduKakaš D., Kovačević L., Terek P., Krumes D., Kolumbić Z.: Use of SEM and EDS analysis in the investigation of Al-Si-Cu piston alloy cast porosity, Metalurgija, 2008, pp. 247-247, ISSN 0543-5846, 8. International Symposium of Croatian Metallurgical Society - SHMD, Šibenik: Croatian Metallurgical Society (CMS), 22-26 Jun, 2008, pp. 247-247, ISBN 0543-5846
(M34) Saopštenje sa međunarodnog skupa štampano u izvoduMiletić A., Škorić B., Panjan P., Čekada M., Kovačević L., Terek P.: Microstructure of nanocomposite TiSiN and nanolayered TiSiN/TiAlN coatings, 36. Microscopy Conference - MC, Regensburg: German Society for Electron Microscopy, 25-30 Avgust, 2013, pp. 613-614
(M34) Saopštenje sa međunarodnog skupa štampano u izvoduMiletić A., Škorić B., Panjan P., Kovačević L., Terek P., Vilotić M., Kukuruzović D.: Characterization of nanostructured TiAlN/TiSiN coatings, 10. Students’ Meeting, Processing and Application of Ceramics, Novi Sad, 6-9 Novembar, 2013, ISBN 978-86-6253-028-8
(M51) Rad u vodećem časopisu nacionalnog značajaŠkorić B., Miletić A., Terek P., Kovačević L., Kukuruzović D.: Nano modification of hard coatings with ions, International Journal of Science and Research, 2016, Vol. 2, No 4, pp. 1-5, ISSN 2412-4389
(M51) Rad u vodećem časopisu nacionalnog značajaVilotić M., Kakaš D., Šiđanin (Sidjanin) L., Alexandrov S., Jeng Yeau R., Terek P.: Severe Plastic Deformation by Multistage Compression, Journal for Technology of Plasticity, 2013, Vol. 38, No 1, pp. 33-40, ISSN 0354-3870, UDK: 621.7
(M51) Rad u vodećem časopisu nacionalnog značajaVilotić M., Kakaš D., Terek P., Kovačević L., Miletić A.: Neutral Radius Value Determination by Numerical Simulation Method at Ring Upsetting Test, Tribology in industry - International Journal of Yugoslav Tribology Society, 2011, Vol. 33, No 3, pp. 122-127, ISSN 0354-8996
(M51) Rad u vodećem časopisu nacionalnog značajaKakaš D., Kovačević L., Terek P.: Mold filling improvement by computer simulation and parameter variation, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2009, Vol. 7, No 1, pp. 83-88, ISSN 1584-2665
(M51) Rad u vodećem časopisu nacionalnog značajaKakaš D., Kovačević L., Terek P.: Computer simulation and experimental research of cast piston porosity , Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2007, Vol. 5, No 2, pp. 179-184, ISSN 1584-2665
(M51) Rad u vodećem časopisu nacionalnog značajaVilotić M., Kakaš D., Šiđanin (Sidjanin) L., Alexandrov S., Jeng Yeau R., Terek P.: Severe Plastic Deformation by Multistage Compression, Journal for Technology of Plasticity, 2013, Vol. 38, No 1, pp. 33-40, ISSN 0354-3870, UDK: 621.7
(M52) Rad u časopisu nacionalnog značajaKakaš D., Škorić B., Babić M., Mitrović S., Miletić A., Vilotić M., Terek P., Kovačević L.: Surface roughness and friction coefficient in IBAD deposited TiN hard coating, FME Transactions, 2009, Vol. 37, No 2, pp. 83-86, ISSN 1451-2092, UDK: 621
(M52) Rad u časopisu nacionalnog značajaKakaš D., Škorić B., Mitrović S., Babić M., Terek P., Miletić A., Vilotić M.: Influence of Load and Sliding Speed on Friction Coefficient of IBAD Deposited TiN, Tribology in industry, 2009, Vol. 31, pp. 3-10
(M53) Rad u naučnom časopisuVilotić M., Kakaš D., Miletić A., Kovačević L., Terek P.: Influence of friction coefficient on workpiece roughness in ring upsetting process, Journal of Production Engineering, 2012, Vol. 15, No 1, pp. 49-52, ISSN 1821-4932, UDK: 621
(M61) Predavanje po pozivu sa skupa nacionalnog značaja štampano u celiniKakaš D., Škorić B., Vilotić M., Terek P., Miletić A., Kovačević L.: Nanomodifikacije površina – unapređenje karakteristika materijala, 1. Savetovanje: Napredni materijali i mogućnosti njihove primene, Požarevac: Narodna tehnika Požarevac, Društvo hemičara, tehnologa i metalurga Požarevac, Veljka Dugoševića 14 Požarevac, 21 Decembar, 2011, pp. 30-39, ISBN 978-86-911159-2-0
(M61) Predavanje po pozivu sa skupa nacionalnog značaja štampano u celiniKakaš D., Škorić B., Miletić A., Terek P., Kovačević L., Vilotić M.: Razvoj nanokompozitnih prevlaka visoke tvrdoće, 1. Savetovanje "Kompozitni materijali i mogućnosti njihove primene", Požarevac: Narodna Tehnika Požarevac, 27 Avgust, 2010, pp. 88-99, ISBN 978-86-912123-3-9
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celiniKakaš D., Škorić B., Vilotić M., Terek P., Miletić A., Kovačević L.: Measuring nano-tribological processes at TiN hard coating, 9. Međunarodna konferencija o dostignućima elektrotehnike, mašinstva i informatike - DEMI, Banja Luka: Mašinski fakultet Banjaluka, 28-29 Maj, 2009, pp. 235-240, ISBN 978-99938-39-23-1
(M63) Saopštenje sa skupa nacionalnog značaja štampano u celiniKakaš D., Kovačević L., Terek P.: Primena računarskih simulacija za poboljšanje tehnologije kokilnog livenja aluminijumskih legura, 32. Savetovanje proizvodnog mašinstva Srbije sa međunarodnim učešćem, Novi Sad: Fakultet Tehničkih Nauka, Novi Sad, 18-20 Septembar, 2008, pp. 245-248, ISBN 978-86-7892-131-5
(M64) Saopštenje sa skupa nacionalnog značaja štampano u izvoduKakaš D., Kovačević L., Terek P.: CAST POROSITY INVESTIGATION BY ELECTRON MICROSCOPY , 4. Serbian Congress for Microscopy - SCM, Beograd: Srpsko društvo za mikroskopiju, 11-12 Oktobar, 2010, pp. 47-48, ISBN 978-86-7306-104-7
(M64) Saopštenje sa skupa nacionalnog značaja štampano u izvoduKakaš D., Škorić B., Terek P., Kovačević L., Miletić A., Vilotić M.: MICRO/NANO-TRIBOLOGICAL PHENOMENON INVESTIGATION BY AFM AND SEM, 4. Serbian Congress for Microscopy - SCM, Beograd: Srpsko društvo za mikroskopiju, 11-12 Oktobar, 2010, pp. 49-50, ISBN 978-86-7306-104-7
ZvanjeUža naučna oblastVisokoškolska ustanovaDatum izbora
DocentLivenje, termička obrada, inženjerstvo površina i nanotehnologijeFakultet tehničkih nauka01.04.2017.
Asistent-masterLivenje, termička obrada, inženjerstvo površina i nanotehnologijeFakultet tehničkih nauka01.01.2016.
Istraživač saradnikInženjerstvo površina, mikro i nano tehnologije25.05.2014.
Istraživač saradnikInženjerstvo površina, mikro i nano tehnologijeFakultet tehničkih nauka10.06.2011.
Istraživač pripravnikTehnologija livenja i termičke obrade i inženjerstvo površina, mikro i nano tehnologijeFakultet tehničkih nauka10.04.2008.